787910

Sharp KF-76HNO22W Manual

17
Zoom out
Zoom in
Previous page
1/157
Next page
EN - 10
ELECTRIC CONNECTION AND
SECURITY
During the electric connection, surely
follow the instructions below.
The earthing cable must be connec-
ted to the terminal. You have to ensure
the
cable with insulation to be connected
to the power source during the connec-
tion of
cable. If there is not any appropriate
earthed electric outlet in accordance
with
regulations in the place where the
appliance will be installed, immediately
contact to
our authorized service.
The earthed electric outlet must be
close to the appliance. Surely do not
use the
extension cord.
The supply cable must not touch to
the hot surface of the product.
In case the supply cable is dama-
ged, surely contact to Qualied Servi-
ce. The
cable must be changed by the authori-
zed service.
The wrong electric connection may
damage your appliance. Such damage
is not
in guarantee extent.
The electric cable must not touch to
the hot parts of appliance. The electric
cable
must not touch the back part of the
appliance. Otherwise the electric cable
of
appliance may be damaged. And this
situation may cause short circuit.
The producer rm declares that it
has no responsibility against any kind
of damages
and losses that emanate from the follo-
wing security norms.
Provide a means of disconnection
from the supply having an air gap
contact separation of at least 3mm in
all active (phase) conductors. Such
means of disconnection shall be incor-
porated in the xed wiring according to
the wiring rules.
The appliance is provided for xed
connection to the power supply. The
connection
of the appliance to an electrical source
must be done by authorized technician.
For xed connection, use the H05VV,
H05V2V2 or H05RR type supply cord.
Some appliances can be equipped
with special plug (Perilex or Norplug). If
it is necessary, change it with the same
specied spare part.
Use 16A/400V 5 pin for perilex plug
and 25A/250V for Norplug.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp KF-76HNO22W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp KF-76HNO22W in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 12.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info