Manual Sharp KF-76FIDD19WM (page 22 of 107) (English, German, French, Italian)

786052

Zoom out

Zoom in

1/107

1- Zvogëlimi i kohë matësit

2- Treguesi i kohë matësit

3- Treguesi i zonës së kohë matësit

4- Selektimi i kohës

5- Koha e Rritjës

Përdorni zonat e gatimit me induksion

me enë gatimi të përshtatshme.

Pas përdorimit të tensionit të rrjetit,

pllaka është në modalitetin e

gatishmërisë dhe është gati për

funksionim.

Vatra kontrollohet nga përdorimi i

Use the corresponding knob to set the

cooking level from 0 to 9. The element

is now ready to use. For fast boil times,

keep the knob at the “P” position for 2

seconds to activate the Boost function

and then adjust to the desired level.

Switching the Cooking Zones Off

Adjust the knob to“0”.

If the cooking zone is hot, “H” will be

displayed instead of “0”.

Residual Heat Indicator

The residual heat indicator indicates

that the glass ceramic area has a

temperature that is dangerous to touch.

After switching off the cooking zone,

the respective display will show “H”

until the corresponding cooking zone

temperature is at a safe level.

Safety Switch-Off Function

A cooking zone will automatically switch

off if the heat setting has not been

modified for a specified duration of

time. A change in the heat setting of the

cooking zone will reset the time

duration to the initial value. This initial

value depends on the selected

temperature level, as shown below.

Heat setting Safety switch off after

1-2 6 Hours

3-4 5 Hours

5 4 Hours

6-9 1.5 Hours

Timer Function

Cooking Zone Timer (1 - 99 min.)

When the hob is switched on, an

independent timer can be programmed

for each cooking zone.

Select a cooking zone, then select the

temperature setting and, finally,

activate the timer setting button , the

timer can be programmed to switch off

a cooking zone. Four LEDs are

arranged around the timer that indicate

which cooking zone the timer has been

set for.

10 seconds after the last operation, the

timer display will change to the timer

that will run out next (in cases where a

timer is set for more than one cooking

zone).

When the timer has run down, a signal

will sound, the timer display will show

´00` and the assigned cooking zone

timer LED will blink. The programmed

cooking zone will switch off and “H” will

be displayed if the cooking zone is hot.

The sound signal and the blinking of

the timer LED will stop automatically

after 2 minutes and/or by pressing any

button.

Buzzer

While the hob is in operation, the

following activities will be signalled by

the buzzer.

•Normal button activation will be

accompanied with a short sound

signal.

•Continuous button operation over

a longer period of time (10

seconds) will be accompanied with

a longer, intermittent sound signal.

EN -15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp KF-76FIDD19WM in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp KF-76FIDD19WM

Sharp KF-76FIDD19WM User Manual - Danish, Swedish, Norwegian, Finnish - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp KF-76FIDD19WM Manual

Product: