786983
16
Zoom out
Zoom in
Previous page
1/23
Next page
EN - 16
4. The current time will
reappear on the
screen, the symbols
A” and “ ” will remain
illuminated.
When the timer reaches zero, the oven
will switch off and an audible warning will
sound. The symbol “A” will flash. Turn
both control knobs to the “0” position and
press any key on the timer to stop the
sound. Press “MODE” for 2 seconds the
A” symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 23 hours and 59
minutes after the current time of day can be
set. Prepare the food for cooking and put it
in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “MODE” until
you see “dur” symbol
on the screen. The
symbol “A” will flash.
3. Select the desired
cooking time period
using the “+” and “-
keys.
4. Press “MODE” until
you see “end” symbol
on the screen. The
time and the symbols
A” will flash.
5. Select the desired
finishing time using the
+” and “-” keys. “
symbol will disappear.
Add the cooking period
to the current time of
day. You can set a time
of up to 23 hours and
59 minutes after this.
6. The current time
will reappear on
the screen, and the
symbols “A”, and will
remain illuminated.
The operating time will be calculated and
the oven will automatically start “ ” symbol
will reappear on the screen so that cooking
will finish at the set finishing time. When the
timer reaches zero, the oven will switch off,
an audible warning will sound and the
symbols “A” will flash. Turn both control
knobs to the “0” position and press any key
to stop the sound. The symbol will
disappear and the timer will switch back to
manual function. Press “MODE” for 2
seconds the “A” symbol will disappear and
the timer will switch back to manual
function.
Sound Adjustment
To adjust the volume of the audible warning
sound, while the current time of day is
displayed, press “+” and “-” keys and the
dot in the middle of the screen will start
to flash. Press “MODE” to display current
signal sound. After this, each time the “-
button is pressed, a different signal will
sound. There are three different types of
signal sounds. Select the desired sound
and do not press any other buttons. After
a short time, the selected sound will be
saved.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp K-90D06BM1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp K-90D06BM1 in the language / languages: English as an attachment in your email.

The manual is 3.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info