786975
12
Zoom out
Zoom in
Previous page
1/126
Next page
EN - 9




 

If the oven is installed under a hob, the
distance between the worktop and the
top panel of the oven must be minimum
50 mm and the distance between the
worktop and the top of control panel
must be minimum 25 mm.
WIRING AND SAFETY OF
BUILT_IN OVEN
The instructions given below must be
followed without fail during wiring :
The earthing cable must be connec-
ted via the screw with the earthing
mark. Supply cable connection must
be as shown in Figure 6. If there is
no earthed outlet conforming to regu-
lations in the installation environment,
call the Authorized Service immedia-
tely.
The earthed outlet must be in close
vicinity of the appliance. Never use an
extension cord.
The supply cable should not contact
the product’s hot surface.
In case of any damage to the supply
cable, make sure to call the Authori-
zed Service. The cable must be repla-
ced by the Authorized Service.
Wiring of the appliance must be per-
formed by the Authorized Service.
H05VV-F type supply cable must be
used.
Faulty wiring may damage the appli-
ance. Such a damage will not be co-
vered under the warranty.
The appliance is designed to connect
to 220-240V~ electricty is different
than the value given above, call the
Authorized Service immediately.
   
    
     
     
   
Wiring of the appliance must be per-
formed by the Authorized Service.
The appliance is
designed to connect to 220-240V~
electricity. If the mains electricity is
different than the value given, call the
Authorized Service immediately. The
appliance is designed for using with
plug ofor xed connection to the ma-
ins. It is necessary that you install a
double pole switch between the pro-
duct and the electricity supply (ma-
ins), with a minimum gap of 3 mm bet-
ween the switch contacts. (20A rated,
delay function type).
3.4. GENERAL WARNING AND
PRECAUTIONS
Your appliance is produced in confor-
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp K-71F28BM2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp K-71F28BM2 in the language / languages: English, German, Danish as an attachment in your email.

The manual is 7.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp K-71F28BM2

Sharp K-71F28BM2 User Manual - Dutch - 147 pages

Sharp K-71F28BM2 User Manual - French - 148 pages

Sharp K-71F28BM2 User Manual - Italian - 147 pages

Sharp K-71F28BM2 User Manual - Polish - 167 pages

Sharp K-71F28BM2 User Manual - Portuguese - 148 pages

Sharp K-71F28BM2 User Manual - Swedish - 147 pages

Sharp K-71F28BM2 User Manual - Spanish - 148 pages

Sharp K-71F28BM2 User Manual - Norwegian - 167 pages

Sharp K-71F28BM2 User Manual - Finnish - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info