786982
17
Zoom out
Zoom in
Previous page
1/24
Next page
EN - 17
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Press the “ ” sensor button until you see
the Duration Time symbol “ ” and “
appear on the Timer display
screen. Set the required cooking period
using the “+” and “-” sensor buttons while
the timer is in this position. Then, press the
” sensor button until the “ ” symbol is
displayed, the time of day and the
Cooking Duration Time symbol will flash.
Adjust the cooking finish time using the “+
and “-” buttons while the timer is in this
position. When you have completed the
adjustment, wait until the current time of
day and “ ” remain illuminated on the
Timer display.
The oven will calculate the operating time
by deducting the cooking period from the
set finishing time, at which it will stop
operating. The timer will give an audible
warning and “ ” will continue to flash. Press
any timer button to stop the warning sound,
and press the “+” and “-” buttons
simultaneously to exit “ ” mode.
Digital Timer Sound Adjustment
Press and hold the “-” sensor button until
you hear an audible 'beep' sound. After
this, each time the “-” button is pressed, a
different 'beep' tone will sound. There are
three different types of sound. Select the
desired tone and do not press any other
buttons. After a short time, the selected
warning sound will be saved.
Key Lock Function
The key lock is used to avoid unintentional
changes being made to the oven settings.
Press and hold the “ ” button until you see
the key lock symbol on the display screen.
To deactivate the key lock, press and hold
the “ ” button until the key lock symbol
disappears from the display.
While the key lock is active, only the power
button will be usable, all other buttons will
remain locked.
If there is no oven activity for 6 hours
while the oven is operating, the oven will
automatically switch off.
4.3 aCCeSSorieS
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
5
6
4
3
2
1
T2
T1
Insert the accessory to the correct
position inside the oven.
Allow at least a 1 cm space between the
fan cover and accessories.
Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
Trays and wire grids can be positioned
on any level from of 1 to 7.
Telescopic rail can be positioned on
levels T1, T2, 3, 4, 5, 6, 7.
Level 3 is recommended for single level
cooking.
Level T2 is recommended for single
level cooking with the telescopic rails.
Level 2 and Level 4 are recommended
for double level cooking.
The turnspit wire grid must be
positioned on Level 3.
Level T2 is used for turnspit wire grid
positioning with the telescopic rails.
****Accessories may vary depending on the
model purchased.
The Wire Grid for Deep Trays
Make sure the wire grid is correctly placed
within a deep tray. It is recommended
to use this accessory for grilling steaks,
meatballs and similar food.
Adjusting the Cooking End Time
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp K - 71Z68BNM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp K - 71Z68BNM in the language / languages: English as an attachment in your email.

The manual is 2.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info