19045
62
Zoom out
Zoom in
Previous page
1/68
Next page
62
HT-X1
Advanced Features
To install the main unit on the wall
Preparation:
Remove the stand from the main unit (perform steps 1 - 2 on page
18).
CAUTION:
! Make sure to prevent the main unit [4.9 lbs. (2.2 kg)] from falling
when mounting it on the wall.
! Before mounting, check the wall strength. (Do not put on a
veneer plaster or whitewashed wall. The main unit may fall.) If it
is not clear, consult with a qualified service technician.
! Mounting screws are not supplied. Use appropriate ones.
! Check all mounting screws for looseness and that they are
engaged in the main unit.
! Mount the main unit on the wall with 2 screws.
! Select a good location. If not, accidents may occur or the main
unit may get damaged.
! Avoid placing on a bed, sofa, water tank, sink and hallway wall.
! SHARP is not responsible for accidents resulting from improper
installation.
Sharp has designed the
main unit so you can hang
it on the wall.
Use appropriate screws
(not supplied). See the il-
lustration on the right for
size and type.
1
Drive two screws into the wall for main unit, as shown in
the illustration.
Make sure that both the screw and the wall can support a load
of 4.9 lbs. (2.2 kg).
Drive the screws, so the screw head extends about 7/32" (5.5
mm) out from the wall.
2
Fix the pattern paper and drive two screws into the wall
with a distance of 5-3/25" (130 mm) in between.
3/16" (5 mm)
1/8" (3.2 mm)
Min. 7/8" (22 mm)
3/8" (9 mm)
7/32" (5.5 mm)
Wall mounting screw
Min. 21/32" (16.5 mm)
Wall surface
Pattern paper
for main unit
5-3/25" (130 mm)
3
Tighten the screws and remove the paper. Hook the main
unit on the screw heads and make sure it is secure.
Wall surface
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp HTX1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp HTX1 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info