679540
9
Zoom out
Zoom in
Previous page
1/52
Next page
EN
device upgrade process  nishes without other operations .
Troubleshooting
No power
Ensure that power adapter is properly connected.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the
soundbar on.
No sound
Increase the volume. Press Volume Up on the remote control or on the
right side of the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a di erent input source.
When using either of the Digital input, if there is no audio:
Try setting the TV output to PCM or
Connect directly to your Blu-ray/other source, some TVs do not pass
through digital audio.
Your TV may be set to variable audio output. Con rm that the audio
output setting is set to FIXED or STANDARD, not VARIABLE. Consult your
TVs user manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is
turned up and that the device is not muted.
Remote control does not work
Before you press any playback control button,  rst select the correct
source.
Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.
I hear buzzing or humming
Ensure all cables and wires are securely connected.
Connect a di erent source device (TV, Blu-ray player, etc) to see if the
buzzing persists. If it does not, the problem may be with the original
device.
Connect your device to a di erent input on the soundbar.
Wi-Fi mode without sound
Check whether the PC or smart phone and soundbar are in the same
network or not;
Check whether the soundbar is in Wi-Fi mode or not;
If using the app, please check whether the music is sent to the speaker
or not;
Forget Wi-Fi password
Clear Wi-Fi preset password,
Boot status, press the remote control button in sequence: PLAY/PAUSE,
NEXT, PREVIOUS, VOL-
Connection is lost periodically during Wi-Fi mode playback
Ensure your Wi-Fi device is not in the Power Saving / Stamina mode.
If the Power saving mode is required for your Wi-Fi device, please add
the “Sharp Player” app to the devices exceptions. To add the app to your
exceptions list, follow the instructions for your chosen device.
Technical speci cation
Model HT-SBW420
Sound Bar
Power Consumption 33 W
Power Consumption (Standby) <0.5W
Power Consumption
(Networked standby)
<2.5W
Output Power 2x 18 W + 36W (RMS)
Frequency Response 70Hz-20KHz(-10dB)
Power Adapter
Manufacturer Shenzhen Fujia Appliance Co., Ltd.
Model FJ-SW2401500N
Input AC 100-240V~50/60Hz
Output DC 24V,1.5A
Bluetooth
Version V 2.1 EDR
Maximum power transmitted <10 dBm
Frequency bands 2402 MHz ~ 2480 MHz
Wi-Fi
Support 802.11 b/g/n; STA/AP/AP Client
Maximum power transmitted <20 dBm
Frequency bands 2412 MHz ~ 2472 MHz
Remote Control
Battery Type 2 x AAA 1,5V
100,0cm
3,7kg
12,2cm
5,2cm
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp HT-SBW420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp HT-SBW420 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info