679541
7
Zoom out
Zoom in
Previous page
1/52
Next page
EN
The setting method of HDMI-CEC and ARC may di er depending on
the TV. For details about ARC function, please refer to your TV owners
manual.
Only HDMI cables of version 1.4 or higher can support the ARC function.
While in HDMI/ARC/OPTICAL mode, if theres no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
U
SB
OPT
IC
AL
OPTICAL input
Use the optical cable to connect the optical input of this soundbar to the
optical output of VCD, CD, VCR, DVD player.
TIPS:
While in HDMI/ARC/OPTICAL mode, if theres no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
L
I
NE IN
HDMI OUT (ARC)
HDMI IN
DC IN
LINE IN
A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s
audio output sockets to the LINE IN socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the TVs
or external audio device headphone socket to the LINE IN socket on
the unit.
TIP:
When you use the headphone output on the TV set, you will be able to
adjust the volume level directly using the TV remote control.
LI
NE
I
N
HDMI OUT (ARC)
H
DM
I
I
N
D
C
IN
DC IN
UK
EU
~AC IN
Connect to Power
Before connecting this device to power, ensure you have completed all
other connections.
Risk of product damage! Only use the supplied mains adaptor as failure
to do this may result in a safety risk and/or damage to the unit.
Connect power cord to the power adapter, then connect power adapter
to the DC IN socket of the unit and as last step connect it into a mains
socket.
Use the other power cord to connect the subwoofer to the mains socket.
Pairing the Wireless Subwoofer with the
Main Unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are
plugged into the supply and turned on. No cable is needed for connecting
the two units.
When the subwoofer is pairing with the main unit, the Pairing Indicator
will  ash fash.
When the subwoofer is paired with the main unit, the Pairing Indicator
will light up.
NOTE:
Do not press the PAIR button on the rear of the subwoofer, except for
manual pairing.
If the automatic pairing fails, pair the subwoofer with the main unit
manually.
Manual pairing
Press the PAIR button on the rear of the subwoofer.
NOTE:
If the wireless connection fails again, check if there is con ict or strong
interference (for example, interference from an electronic device) around
your location. Remove these con icts or strong interferences and repeat
the above procedures.
The subwoofer should be within 6m of the soundbar in an open area.
If a device is connected via HDMI (CEC active), the main unit and the
subwoofer will switch on automatically when the external device is
switched on.
Basic Operation
Standby/ON
When you  rst connect the unit to the main socket, the unit will be in
STANDBY mode.
Press the
button on the remote control to switch the main unit ON
or OFF.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp HT-SBW260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp HT-SBW260 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info