787653
7
Zoom out
Zoom in
Previous page
1/68
Next page
EN
The setting method of HDMI-CEC and ARC may di er depending on
the TV. For details about ARC function, please refer to your TV owners
manual.
Only HDMI cables of version 1.4 or higher can support the ARC function.
While in HDMI/ARC/OPTICAL mode, if theres no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
OPTICAL
OPTICAL input
Use the optical cable to connect the optical input of this soundbar to the
optical output of an audio source device.
TIPS:
While in HDMI/ARC/OPTICAL mode, if theres no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
AUX IN
You can use the Aux-in to playback analogue stereo audio signals from
external devices.
A. Use a RCA to 3.5mm audio cable (not included) to connect the TVs
audio output sockets to the AUX IN socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the TVs
or external audio device headphone socket to the AUX IN socket on
the unit.
TIP:
When you use the headphone output on the TV set, you will be able to
adjust the volume level directly using the TV remote control.
Pairing the wireless subwoofer with the
main unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are
plugged into the power supply and turned on. No cable is needed for
connecting the two units.
When the subwoofer is pairing with the main unit, the pairing indicator
(red LED) will  ash fast.
When the subwoofer is paired with the main unit, the pairing indicator
(blue LED) will light up.
NOTE:
To disconnect the soundbar and subwoofer: press and hold the SOURCE
button on the soundbar; the red LED indicator on the subwoofer will
ash when disconnected.
To reconnect the soundbar and subwoofer: press and hold the SOURCE
button again on the soundbar; the blue LED indicator on the subwoofer
will light up when connected.
Do not press the PAIR button on the rear of the subwoofer, except for
manual pairing.
If the automatic pairing fails, pair the subwoofer with the main unit
manually.
Manual pairing
1. Press the PAIR button on the rear of the subwoofer, the subwoofer's red
light will  ash 2x.
2. Reset the soundbar - long press (5s) the power key when the soundbar
is in LINE mode; the soundbar will reset and go in to standby.
3. Power on the soundbar. The soundbar will search and pair with the
subwoofer automatically.
NOTE:
If the wireless connection fails again, check if there is con ict or strong
interference (for example, interference from an electronic device) around
your location. Remove these con icts or strong interferences and repeat
the above procedures.
The subwoofer should be within 6m of the soundbar in an open area.
If a device is connected via HDMI (with CEC active), the main unit and
the subwoofer will switch on automatically when the external device is
switched on.
Basic operation
STANDBY/ON
When you  rst connect the unit to the mains power, the unit will be in
STANDBY mode.
Press the button on the remote control to switch the main unit ON or
to STANDBY.
Disconnect the plug from the wall socket if you want to switch the unit
o completely.
When the unit detects no input signal for over 15 minutes, it will
automatically switch to STANDBY mode.
Select modes
Press the button on the unit repeatedly or press the / button on
the remote control to select the desired mode.
Adjust the volume
Press the + / - buttons on the unit or on the remote control to adjust the
volume.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp HT-SBW202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp HT-SBW202 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info