787653
3
Zoom out
Zoom in
Previous page
1/68
Next page
EN
Important safety instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
The lightning  ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage” within the
product’s enclosure that may be of su cient magnitude as to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol means that the product should be disposed of
in an environmentally friendly manner and not with general
household waste.
AC voltage
Class II equipment
In order to prevent  re always
keep candles and other open
ames away from this product.
Warning:
Always follow basic safety precautions when using this appliance,
especially when children are present.
Children should be supervised to ensure that they do not play with the
appliance.
Do not damage the power cord, do not place any heavy objects on it, do
not strech it or bend it and do not attach extension cables. Damage to
the power cord may cause  re or electric shock.
If the power cord is damaged, it must be replaced by the manufacturer,
a service agent or similarly quali ed persons in order to avoid a hazard.
Ensure that the unit is plugged into an AC 100-240V 50/60Hz power
outlet. Using higher voltage may cause the unit to malfunction or even
catch  re.
If the power plug does not  t into your outlet, do not force the plug into
an electrical socket.
Turn o the unit before unplugging it from power source.
Do not disconnect or connect the power cord with wet hands. It may
cause an electric shock.
Disconnect the power cord if the unit is not going to be used for a long
time.
Ensure that the mains plug is always easily accessible.
This product does not contain any parts that are serviceable by the
user. In case of a fault, contact the manufacturer or authorised service
department. Exposing the internal parts inside the device may endanger
your life. The manufacturers guarantee does not extend to faults caused
by repairs carried out by unauthorised third parties.
Do not use this product immediately after unpacking. Wait until it is at
room temperature before using it.
Ensure this product is used in moderate climates only (not in tropical/
subtropical climates).
Place the product on a  at, stable surface that is not subject to
vibrations.
Ensure the product and its parts do not hang over the edge of the
supporting furniture.
To reduce the risk of fire, electric shock or damage to this product, do
not expose it to direct sunlight, dust, rain and moisture. Never expose it
to dripping or splashing liquids.
Do not place objects  lled with liquids, such as vases, on the apparatus.
Do not install near any heat sources such as radiators, stoves, or other
apparatus (including ampli ers) that produce heat.
Do not place the product where the humidity is high and ventilation is
poor.
Ensure a minimum distance of 5 cm around the apparatus for su cient
ventilation. Do not block any ventilation openings of this product.
Always ensure that the ventilation openings are not covered with items
such as newspapers, table-cloths, curtains, etc.
NEVER let anyone, especially children, push anything into holes, slots
or any other openings in the unit’s casing as this could result in a fatal
electric shock.
Storms are dangerous for all electrical appliances. If the mains or aerial
wiring is struck by lightning, the appliance might get damaged, even if it
is turned o . You should disconnect all the cables and connectors of the
appliance before a storm.
Maintenance
Unplug the power cable from the power source before cleaning the
appliance.
Use a soft and clean cloth to clean the outside of the unit. Never clean it
with chemicals or detergent.
Batteries
Observe the correct polarity when inserting the
batteries.
Do not expose batteries to high temperatures and do
not place them in locations where the temperature
might increase quickly, e.g. near  re or in direct
sunshine.
Do not expose batteries to excessive radiant heat, do
not throw them into the  re, do not disassemble them and do not try to
recharge non-rechargeable batteries; they could leak or explode.
Disposal of a battery into  re or mechanically crushing or cutting a
battery can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment can result in an explosion or the leakage of  ammable
liquid or gas.
A battery subjected to extremely low air pressure may result in an
explosion or the leakage of  ammable liquid or gas.
CAUTION: Risk of explosion or damage to equipment, if incorrect type
batteries are used.
Never use di erent batteries together or mix new and old batteries
together.
When the remote control is not to be used for a long time (more than a
month), remove the batteries from the remote control to prevent them
from leaking.
If the batteries leak, wipe away the leakage inside the battery
compartment and replace the batteries with new ones.
Do not use any batteries other than those speci ed.
Do not ingest battery, chemical burn hazard
If the battery is swallowed, it can cause severe internal burns in just
2 hours and lead to death. Keep new and used batteries away from
children. If the battery compartment does not close securely, stop
using the product and keep it away from children. If you think batteries
might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Trademarks:
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG,. Inc.
The terms HDMI, HDMI High-De nition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
Basic operation
ON/standby
1. Press to switch the unit between ON and
STANDBY mode. (Standby - RED LED)
Select the Bluetooth mode
2. Select the Bluetooth mode.
Press and hold to activate the pairing function
in Bluetooth mode or disconnect the existing
paired Bluetooth device.
Source selection
3. Press repeatedly to select a signal source BT
(Bluetooth), LINE, OPT (Optical), ARC (HDMI) and
USB mode.
Volume control
4. Press +/- to Increase/decrease the volume level.
Playback control
5. / Skip to previous/next track in Bluetooth
or USB mode.
6. Play/pause/resume playback in Bluetooth or
USB mode.
Hold down this button for 3 seconds to
disconnect Bluetooth.
Audio mute
7. Press to mute or resume the sound
Custom equaliser settings
8. Press BASS +/- to adjust bass level.
9. Press TRE +/- to adjust treble level.
Note: these only change the CUST EQ setting.
EQ - equaliser mode
10. EQ – Press repeatedly to switch between EQ1,
EQ2, EQ3 and CUST equaliser modes.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp HT-SBW202 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp HT-SBW202 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info