297668

Sharp gx20 Manual

162
Zoom out
Zoom in
Previous page
1/189
Next page
i
In just a few minutes this QuickStart Guide will show you how to use
some of the main features of your new GX20.
QUICKSTART GUIDE
1: GETTING STARTED
The Sharp GX20 is one of the most advanced mobile handsets available. With it you will be
able to use its built-in camera to take pictures and video clips, play arcade quality games,
listen to life-like polyphonic ringtones and sounds, send Multimedia messages, and connect
to Vodafone live! and the mobile internet.
But before you can do any of this, first you need to make sure your handset is prepared.
1. Inserting your SIM card:
Slide off the battery cover, and remove the battery. Slide your Vodafone SIM card (with the
gold contacts facing downwards) into its holder. Replace the battery and cover.
2. Charging the battery:
Before using your handset for the first time, it’s important to charge the battery for at least 2
hours (see page 14 of the Manual).
3. Turning it on and off:
Open the handset, then press and hold the red F key. Do the same to turn it off again.
SIM card
ii
QUICKSTART GUIDE
2: NAVIGATION
by SHARP
G
Camera
Select
Exit
The GX20 has many features, but exploring and using them is simple,
thanks to the 5-way central navigation key and the contextual
softkeys.
(Centre key): Use to select an icon or menu item.
In Standby: Takes you to the main Menu (shown in phone).
In Camera mode: Takes a picture or starts/stops video recording.
(Navigation keys): Use to move between icons in menus and item lists.
(In Standby): Brings up commonly used menus (Contacts List, Applications and Saved
Pictures).
The A softkey selects whatever icon or command is shown in the bottom left of the
screen. The
C
softkey selects the bottom right of the screen (this usually acts as
Cancel or Back.) The key will select what’s in the middle.
(When ringing): Answers a call.
(In Standby): Brings up Last Dialled numbers.
(During call): Ends a call.
(Press and hold): Turns handset on and off.
(In menus): Takes you back to the Standby screen.
Takes you to the Vodafone live! home page.
AC
D
F
E
iii
The GX20’s built-in camera now lets you take video clips, as well as
having digital zoom and even a flash. Once you’ve taken your video
or picture you can save it, then send it to others at a mobile number
or email address (see next page).
QUICKSTART GUIDE
3: THE CAMERA
1. Video Camera mode:
Go to the main Menu (press in Standby mode), select the Camera icon (you’ll see the
word ‘Camera’ in the red title bar), then press . Select Video Camera.
2. Recording a video clip:
The screen becomes your viewfinder. You can zoom in (up to 4×) by pressing the key
(the key zooms out again). You can also adjust the brightness using the and
keys. Then press to start recording. When you’ve finished, press again.
3. Saving your video:
Now you’ll be offered the choice of Save or Preview. Choose Preview to review your clip,
then press C [Back]. If you’re happy with the clip, select Save (it will be saved in My Stuff
in the main Menu). If not, press
C
[Cancel], and try again.
4. Digital Camera mode:
Choose Digital Camera in the Camera menu (or press the C key in Standby mode).
Press to take the picture. Press A [Save] to save it (in My Stuff), or press C [Cancel]
and take it again.
Tip: You can change the camera viewfinder to the external display (for taking pictures/
videos of yourself) by pressing the P key. And you can adjust the Macro dial around the
lens to take close-up shots ( ).
Stop
16
F
Fine 0 x1
Macro
dial
External
display
iv
QUICKSTART GUIDE
4: MULTIMEDIA MESSAGING
Life is more than just text. With Multimedia Messaging you can now
send video clips, pictures and sounds as well! Your handset is already
enabled to send and receive Multimedia Messaging, but if you have
any problems call your local Vodafone customer services.
1. Create a new Multimedia message:
Select Messages in the main Menu (or press the A key in Standby mode). Select
Multimedia Messages, then Create Message.
2. Write your message:
Use the keypad to write your text. To enter punctuation or other characters, press the R
key, then select the symbol you want. For a space, press Q.
Tip: To turn Predictive Text (T9) off and on while entering text, press and hold the R key
(you’ll see the T9 symbol at the top of the screen). Press and hold the P key to cycle
through the Input Method (capitals, numeric, etc.).
3. Add your video clip: ( symbol in message menu bar)
Press
A
[Options] and select Video Clip. Highlight the clip you want to send. Press ,
then press
C
[Back].
Tip: To send video you may have to adjust the setting. Select Multimedia Messages in the
Messages menu, then press A [Options]. Choose Settings, Slide Show then make sure
that Off is selected.
4. Add your picture: ( symbol in message menu bar)
Press
A
[Options] and select Picture. Highlight the picture you want, press , then press
C
[Back].
G
Message:
Options
Clear
Hi there - wait til you
see this!
|
32KB 34/2000
Abc
T
9
G
Select Back
OK
Picture
Sound
Video Clip
Message Template
Text Template
Preview Message
Message:
32KB 34/2000
Abc
T
9
Options
v
QUICKSTART GUIDE
5. Add a sound file: ( symbol in message menu bar)
Press A [Options] and select Sound. To listen to the sounds, press A [Options], then Play.
Highlight the sound you want, press , then press C [Back].
6. Preview your message:
Then press
A
[Options], and select Preview Message. If you’re happy with the message,
press , then again to go to the To: screen.
7. Send to another mobile:
Enter the number of the mobile phone you want to send it to. Press , then select Send
and press again. If the receiving phone can’t display Multimedia messages or video
clips, they’ll be sent a link to a web page they can view them on.
Tip: Try sending it to yourself to see how it works!
8. Send to an email address:
After Step 6, press A [Options], and select Input Method. Choose abc and then press C
[Back]. Then write the email address (using the R key to bring up the symbols menu for
the @ key). Press , then select Send and press again.
Tip: Press A [Options], then select Search in the To: screen to bring up your Contacts list.
Then choose the mobile number or email address for the contact you wish to send it to. It
will be entered in the To: screen automatically.
G
To:
Options
Clear
eric.wise@hotmail.com
|
21/60
abc
G
Options Back
Hi there - wait til you
see this!
vi
QUICKSTART GUIDE
5: Vodafone live!
Vodafone live! is a mobile internet portal which is your gateway to a
new world of information, games, music and sevices.
Connect to Vodafone live!:
Simply press the E key (under the Navigation key) to connect you to the Vodafone live!
main menu. To exit, press the F key.
Tip: Your GX20 uses GPRS, a fast way of getting mobile information. Also, the connection
is ‘always on’ — which means no wait for dialling up. You only pay for data you send or get,
not how long you’re connected.
Or link directly to Vodafone live! services:
In the main Menu, select the Vodafone live! section, and choose your service:
Games: Online fun and games to download...
Ringtones: Download music, sounds and ringtones.
Pictures: Download images, animations and background wallpaper.
News: Get the latest news as it happens...
Sport: News, results and latest scores (with pictures).
Find & Seek: Get the local information you need, wherever you are.
Chat: Instant messaging and text chat with all your friends.
Search: Find what you need in Vodafone live!
Tip: Vodafone live! is growing and changing all the time, so these options may vary. Keep
checking it out to see what’s new.
Help &
Search
Games
Messages
Chat
My
Vodafone
More...
Download
New
This works very like an
ordinary web browser. Use
the navigation keys to
highlight the item you want
to select, then press to
open that page. Press
C
[Back] to go back a page.
Press
A
[Options] for the
Browser Option menu.
vii
Personalise your new handset by downloading new ringtones,
images and background wallpaper from Vodafone live!. All
downloads are saved in the My Stuff section of the main Menu.
QUICKSTART GUIDE
6: DOWNLOADING
You can download from the Vodafone live! portal or the handset shortcuts (see previous
page), or use the Download More menus:
1. Download a new ringtone:
Your GX20 uses polyphonic ringtones for a more life-like sound. Go to the My Stuff section
from the main Menu, choose Sounds and then Download More. Choose the ringtone you’d
like and follow the instructions to download it.
Tip: To activate your ringtone, go to Profiles (in the main Menu), then choose Normal, then
select Options/Personalise/Assign Melody. Choose My Sounds and select your
downloaded ringtone.
2. Download new background wallpaper:
To choose a new background image for your phone, go to My Stuff/Pictures/
Download More. Choose an image and follow the instructions to download it. Then go to
Settings (in the main Menu)/Phone Settings/Main Display/Wallpaper/My Pictures, and
select your downloaded image.
3. Download new games:
To add more arcade quality games to your handset, go to Fun & Games (in the main Menu)
and choose Games & More/Download More. Choose a game to download, and you’ll find
it in Fun & Games/Games & More/Applications.
G
Games & More
Select
Back
Applications
Screensavers
Download More
Settings
Javaª Information
1-1-3
TM
G
Normal
Save
Back
Ringer VolumeDownload More
Assign Melody
Vibration
Keypad Tones
Warning Tone
Power On Sound
Power Off Sound
Message Alert
Pattern 1
viii
QUICKSTART GUIDE
7: TIPS AND TRICKS
Here are a few tips to help you use your new handset. There’s much
more information in the manual — or you could just explore all the
menus and options screens...
1. Silent mode:
To switch your handset to silent mode, press and hold the R key. Highlight the Silent
profile and select it. Select the Normal profile to go back to your usual setting.
2. International dialling:
Press and hold the P key for the (+) sign when dialling international numbers.
3. Voice Memo:
Press then R to bring up the Voice Memo application. Press to record, and again
to stop. You can send voice memos as part of a Multimedia message.
4. Front light:
Press and hold the side key on the left side of the handset (in Standby mode) to turn the
light on and off (it can be used as a makeshift torch). Press the side key to change the colour
(the last selection cycles through them all like a disco light).
5. External display:
You can customise your External display in the same way as your main screen. Go to Phone
Settings from the main Menu, then choose External Display. Now you can change the way
the clock looks, the background picture, even the icon displayed when there’s a call...
G
External Display
Select
Back
Wallpaper
Backlight
LCD Contrast
Incoming Indication
Clock Display
Icon Display
LCD On/Off
Illustration 1
G
Voice Memo
Start Back
Ready to record
Introduction 1
Introduction
Congratulations and thank you for choosing the GX20.
About This User Guide
This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate
permanent written records of all important data. Data
may be lost or altered in virtually any electronic memory
product under certain circumstances. Therefore, we
assume no responsibility for data lost or otherwise
rendered unusable, whether as a result of improper use,
repairs, defects, battery replacement, use after the
specified battery life has expired or any other cause.
• We assume no responsibility, directly or indirectly,
for financial losses or claims from third parties
resulting from the use of this product and any of its
functions, such as stolen credit card numbers, the loss
or alteration of stored data, etc.
• All company and/or product names are trademarks and/
or registered trademarks of their respective holders.
• Screen layout illustrated in this user guide may differ
from the actual one.
The information described in this user guide is
subject to change without notice.
• All the functions described in this user guide may not
be supported in all networks.
• We assume no responsibility for downloaded
contents, information, etc. from network.
• The CGS-LCD is a world advanced technology
product, giving you fine picture quality.
Occasionally, a few black or bright pixels may appear
on the screen. Please note that this will not have any
impact on any of the features or performance.
Copyright
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
2 Introduction
Powered by JBlend
®
, ©1997-2003 Aplix Corporation. All
rights reserved.
Java and all Java-based trademarks and logos are trade-
marks or registered trademarks of Sun Microsystems, Inc.
in the U.S. and other countries.
JBlend and all JBlend-based trademarks and logos are
trademarks or registered trademarks of Aplix Corporation in
Japan and other countries.
In this product, JBlend
®
is incorporated.
JBlend
®
is a Java execution environment
that Aplix developed for implementing
advanced performance and fast operation
on small-memory systems. JBlend and
JBlend logo are trademarks or registered
trademarks of Aplix Corporation in Japan
and other countries.
Powered by Mascot Capsule
®
/Micro3D Edition™
Mascot Capsule
®
is a registered trademark of HI Corpora-
tion
©2002-2003 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under
one or more of the following United States Patents and/or
their domestic or foreign counterparts and other patents
pending, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450 & 4,811,420.
Licensed under U.S. Patent 4,558,302 and foreign counter-
parts.
T9 Text Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480, 5,945,928,
and 6,011,554; Australian Pat. No. 727539; Canadian Pat.
No. 1,331,057; United Kingdom Pat. No. 2238414B; Hong
Kong Standard Pat. No. HK0940329; Republic of
Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB;
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1; and additional patents are pending
worldwide.
Introduction 3
Useful Functions and Services of the
Phone
Your phone offers you the following features:
• Built-in digital camera that can take pictures and
record video clips.
• Create and read SMS (Text Message).
• Multimedia Messaging Service (MMS) can
personalise your phone in various ways: you can send
and receive multimedia messages with graphical
images, photographs, sound or video clips attached.
• WAP browser to help you access a variety of
information on the mobile Internet.
• Java™ applications. You can also download various
kinds of applications from Vodafone via the mobile
Internet.
• Continuous grain silicon (CGS) colour LCD main
display with images that are clearer and easier to view.
• Colour external display enables you to quickly see
who is calling and if you have any new messages.
• Mobile light with large number of uses: as a camera
flash, battery charge notification, incoming call
indicator and a makeshift torch.
• Melody editing function allows you to create original
ringtones using up to 16 voices.
• Voice memo function allows you to record and play
back your voice messages.
4 Table of Contents
Table of Contents
QUICKSTART GUIDE ................................... i
Introduction ................................................. 1
Useful Functions and Services of the
Phone ...........................................................3
Table of Contents ........................................ 4
Your Phone .................................................. 7
Optional Accessories ...................................7
Getting Started ............................................ 8
Inserting the SIM Card and the Battery .....11
Charging the Battery ..................................14
Turning Your Phone On and Off ...............16
Display Indicators (Main Display) ............17
Display Indicators (External Display) .......19
Call Functions ............................................ 21
Making a Call .............................................21
Speed Dialling ............................................21
Redialling ...................................................22
Ending a Call .............................................22
Answering a Call .......................................23
Incall Menus ..............................................24
Entering Characters ..................................29
Changing the Input Languages ...................30
Changing the Input Method .......................30
Using Text Templates ................................31
Using the Menu ..........................................32
List of Menu Functions ..............................34
Contacts List .............................................35
Selecting the Contacts List Memory ..........35
Creating a New Entry .................................36
Finding a Name and Number .....................40
Dialling Using Contacts List Entries ..........40
Editing Contacts List Entries .....................41
Deleting a Single Contacts List Entry ........42
Deleting All Contacts List Entries .............42
Viewing Groups .........................................42
Memory Status ...........................................44
Speed Dial List ...........................................45
Sending Messages ......................................45
Swapping Location Number of the Phone
Number .......................................................46
Table of Contents 5
Camera ...................................................... 47
Digital Camera ..........................................47
Video Camera ............................................54
Messages .................................................. 59
Multimedia (MMS) ...................................59
Text (SMS) ................................................70
Cell Broadcasts ..........................................76
Area Info ...................................................78
Vodafone live! ........................................... 79
Viewing the WAP Browser ........................79
Navigating a WAP Page .............................80
My Stuff ..................................................... 83
Games & More ..........................................83
Pictures ......................................................86
Sounds .......................................................92
Video Clips ................................................95
Bookmarks ................................................97
Text Templates ..........................................98
Memory Status ..........................................99
Fun & Games .......................................... 100
Games & More ........................................100
Melody Editor .........................................105
Applications ............................................ 114
SIM Application ..................................... 114
Calendar .................................................. 114
Alarm ...................................................... 116
Calculator ............................................... 119
Voice Memo ........................................... 121
PC Link ................................................... 122
Phone Help ............................................. 122
Profiles ....................................................123
Activating a Profile .................................. 123
Customising Profiles ............................... 124
Resetting Profile Settings ........................ 124
Ringer Volume ........................................ 125
Assigning Melody .................................. 125
Vibration .................................................. 126
Keypad Tones .......................................... 126
Warning Tone .......................................... 127
Power On/Off Sound ............................... 128
Message Alert .......................................... 128
Low Battery Alert .................................... 129
Any Key Answer ..................................... 129
Contacts ..................................................130
Call Log .................................................. 130
6 Table of Contents
Call Timers .............................................131
Call Costs ................................................132
Data Counter ...........................................134
Speed Dial List ........................................135
My Numbers ...........................................135
Settings ................................................... 136
Phone Settings .........................................136
Call Settings ............................................145
Diverts .....................................................148
Date & Time ...........................................150
Network Settings .....................................152
Internet Settings ......................................154
Infrared ....................................................160
Security ...................................................160
Master Reset ...........................................166
Connecting GX20 to Your PC ................. 167
System Requirements ..............................167
GSM/GPRS Modem ................................167
Handset Manager .....................................167
Software Installation ................................167
Note ..........................................................168
Troubleshooting ......................................169
Safety Precautions and
Conditions of Use ....................................171
CONDITIONS OF USE ...........................171
ENVIRONMENT ....................................174
PRECAUTIONS CONCERNING
VEHICLE USE ........................................174
Index .........................................................176
Your Phone 7
Your Phone
Please check the following carefully. Your phone
should come complete with:
• GSM 900/1800/1900 GPRS phone
• Rechargeable Li-ion battery
• AC charger
• Hands free
•CD-ROM
•User guide
Optional Accessories
• Li-ion spare battery (XN-1BT11)
• High capacity Li-ion battery (XN-1BT13)
• Cigarette lighter charger (XN-1CL10)
• Data cable (RS232C cable: XN-1DC10)
• AC charger (XN-1QC17)
The above accessories may not be available in all
regions.
For details, please contact your dealer.
8 Getting Started
Getting Started
22
23
24
25
26
1
2
3
4
5
6
7
16
8
9
10
11
12
13
14
15
17
18
19
20
21
Getting Started 9
1. Earpiece
2. Navigation Keys (Arrow Keys):
Moves cursor to select
menu items, etc.
, , , in this
manual indicate these keys.
Up/Down arrow keys: Displays Contacts List
entries in stand-by mode.
Left arrow key: Displays list of
Applications in stand-by
mode.
Right arrow key: Displays list of Saved
Pictures in stand-by mode.
3. Centre Key: Displays Main menu in
stand-by mode and
executes functions.
in this manual indicates
this key.
4. Left Soft Key: Executes the function at the
bottom left of the screen.
A in this manual indicates
this key.
5. Send Key: Makes or accepts calls,
views the call in stand-by
mode.
6. Voice Mail Key: Press and hold this key to
connect to the Voice mail
centre automatically.
(Depends on the SIM card.)
7. * /Shift Key,
Viewfinder Switch Key:
Enters *.
Press and hold this key to
switch input method among
four modes: Abc, ABC, abc
and 123.
Switches viewfinders
between main display and
external display in digital
camera/video camera
mode.
8. Main Display
9. Hands Free Connector
10. Right Soft Key: Executes the function at the
bottom right of the screen.
C in this manual indicates
this key.
11. “Vodafone live!” Key:
Used to access “Vodafone
live!” by opening the
browser.
10 Getting Started
12. End/Power Key: Ends a call, turns power on/
off.
13. Keypad
14. #/Flash light Key: Switches symbol screens.
Press and hold this key to
shift text input method
between multi-tap and T9
mode.
Turns the flash/auxiliary
light on or off in digital
camera/video camera
mode.
15. Microphone
16. External Connector:
Used to connect either the
charger or data cable.
17. Aerial
18. Mobile Light: Used as a flash or an
auxiliary light in digital
camera/video camera
mode, as a battery charge
indicator, or notification for
incoming calls, data/fax
calls or messages.
19. Macro Dial: Turns the dial to normal
(Close-up) ( ) or macro ( )
position.
20. Camera
21. External Display
22. Infrared Port: Sends and receives data via
infrared.
23. Speaker
24. RF Connector
25. Side-Up/Side-Down Keys:
Moves cursor to select
menu items, adjusts
earpiece volume, etc.
In stand-by mode, press
and hold this key to turn the
mobile light on and off.
When the mobile light is
on, press this key to change
the light colour.
26. Battery Cover
Getting Started 11
Inserting the SIM Card and the
Battery
1. Slide off the battery cover.
2. Slide the SIM card into the SIM holder.
SIM card
12 Getting Started
3. Hold the battery so that the metal contacts of the
battery are facing down, slide the guides on the top
of the battery into the battery slots , and then
insert it .
4. Replace the battery cover as shown below and slide
it as shown.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery
(XN-1BT11) or the optional accessory, high capacity
Li-ion battery (XN-1BT13) is used.
Getting Started 13
Removing the SIM Card and the Battery
1. Make sure to turn off your phone and disconnect the
charger and other accessories. Slide off the battery
cover.
2. Pick up the battery using the protruding edge and
remove the battery from the phone.
3. Slide the SIM card by pushing the back of the card
and remove it from the SIM holder.
14 Getting Started
Battery Disposal
The device is supported by a battery. In order to protect
the environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to an open flame, into
water or dispose with the household waste.
Charging the Battery
You must charge the battery for at least 2 hours before
using your phone for the first time.
Using the Charger
1. Connect the charger to the external socket located at
the bottom of the phone with the charger’s “PUSH
TOP” mark facing towards you, and to an AC
outlet.
The mobile light lights red.
Standard charging time: Approx. 2 hours.
Mobile light
Getting Started 15
Note
• Charging time may vary depending on the state of the
battery and other conditions. (See “Battery” on
page 172.)
To Disconnect the Charger
Push and hold the side buttons of the charger, then
disconnect the charger from the external socket of the
phone.
2. When charging is complete, the mobile light turns
off. Unplug the charger from the AC outlet, then
unplug the charger connector from the phone.
Note
• Do not use any non approved charger, this may
damage your phone and invalidate any warranty,
please see “Battery” on page 172 for details.
• When the phone is charging, the animated battery
status icon ( ) in the upper right of the screen
displays the current status.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power
for charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right
hand side of the main display and the external display.
Low Battery During Use
When the battery is running low, an alarm will sound
and the “ ” is displayed on the main display and the
external display.
If you are using your phone and you hear the “low
battery” alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it. The battery may only
last approximately five minutes before the phone itself
powers down during a call.
Battery Indicators Charge Level
Sufficiently charged
Partially charged
Charging recommended
Charging required
Empty
16 Getting Started
Turning Your Phone On and Off
To turn the power on, press and hold F for
approximately 2 seconds.
The stand-by screen is displayed.
To turn the power off, press and hold F for
approximately 2 seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal
Identification Number) code after turning on your
phone.
1. Enter your PIN code.
2. Press .
Note
• If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 160.
To Copy Contacts List from the SIM Card
When you insert the SIM card into your phone for the
first time and start the Contacts List application, you are
asked whether you wish to copy Contacts List entries
on the SIM card. Follow the on-screen instructions, or
you can do it later using the Contacts List menu as
follows:
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Contacts List”, then
press to select.
4. Press A [Options] to display Options menu.
5. Press or to highlight “Advanced”, then
press or
A
[Select] to select.
6. Press or to highlight “Copy All from SIM”,
then press to select.
7. Press A [Yes] to start copying.
To cancel copy, press C [No] in step 7.
Getting Started 17
Display Indicators (Main Display)
Status Indicators
1. / : Indicates the strength of received
signal/the service is out of range.
2. : Appears when your phone is GPRS
enabled and within range.
Flashes during GPRS transmission.
3. / / : Appears when a new text message,
multimedia message alert or WAP
alert has arrived.
4. / : Appears when the application is
executed (colourful) or suspended
(sepia).
5.(No display)////:
Indicates the phone’s mode (Normal
mode/Meeting mode/Activity mode/
Car mode/Silent mode).
6. : Appears when the T9 text input
method is activated.
Status
indicators
Right soft key
Left soft
key
Centre key/Navigation keys
18 Getting Started
7. / / / :
Indicates the text input method (First
letter upper case mode/Upper case
mode/Lower case mode/Numeric
mode).
8. : Appears when “Diverts” (p. 148) is set
to “All Calls”.
9. : Appears when the Outbox contains
multimedia messages you failed to
send.
10. / : Appears when viewing secured WAP
browser.
11. : Appears when in call.
12. / : Appears when the WAP or MMS
communication is in CSD or GPRS
mode.
13. : Indicates the battery level.
14. : Appears when your phone is roaming
outside of your network.
15. : Appears when “Ringer Volume”
(p. 125) is set to “Silent”.
16. : Appears when vibration (p. 126) alert
is set.
17. : Appears when the data cable is
connected to your phone.
18. / : Appears when “Infrared” is on/during
connection.
19. : Appears when your phone is in data
communication mode.
20. : Appears when your phone is in fax
communication mode.
21. : Appears when a voicemail message is
stored.
22. : Appears when the alarm is set.
Soft Key Indicators
To execute the operation indicated, press the
corresponding key.
23. Area at the lower left of the screen:
Displays the operation executed by
left soft key.
Getting Started 19
24. Area at the lower right of the screen:
Displays the operation executed by
right soft key.
Centre Key/Navigation Keys Indicators
To execute the operation indicated, press the
corresponding key.
25. Area at the lower centre of the screen:
Displays the operation executed by the
centre key. (For centre key options,
use the Options menu displayed by the
left soft key.)
26. Around the centre key indicator:
Appears when up, down, right or left
navigation is available.
Display Indicators (External Display)
Status Indicators
1. : Indicates the received signal strength.
2. : Appears when GPRS is within range
and can be used.
Flashes during GPRS communication
mode.
3. : Appears when a new text message,
multimedia message alert or WAP
alert has arrived.
4. : Appears when “Ringer Volume”
(p. 125) is set to “Silent”.
Status
Indicators
20 Getting Started
5. : Appears when in call.
6. / : Appears when the WAP or MMS
communication is in CSD or GPRS
mode.
7. : Indicates the battery level.
8. : Appears when your phone is roaming
outside of your network.
9. : Appears when “Diverts” (p. 148) is set
to “All Calls”.
10. : Appears when your phone is in data
communication mode.
11. : Appears when the phone is in fax
communication mode.
12. : Appears when the alarm is set.
13. : Appears when the data cable is
connected to your phone.
14. / : Appears when “Infrared” is on/during
connection.
15. : Appears when the Outbox contains
multimedia messages you failed to
send.
Call Functions 21
Call Functions
Making a Call
1. Enter the area code and the phone number you wish
to dial.
If you enter the wrong number, press C [Clear] to
delete the number to the left of the cursor.
2. Press D to dial.
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad.
2. Press D to dial.
Note
• Emergency calls may not be available on all mobile
phone networks when certain network services and/
or phone features are in use. Contact your network
operator for more information.
• This Emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a GSM network is
within range.
International Calls
1. Press and hold P until a “+” (international dialling
prefix) sign is displayed.
2. Enter the country code, followed by the area code
and the number.
3. Press D to dial.
Note
• Enter the area code omitting the first 0 when making
international calls, in most cases. (It differs for some
countries.)
Speed Dialling
Up to 9 phone numbers from the Contacts List memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys (H to O
and Q).
For details on setting the Speed Dial List, see “Speed
Dial List” on page 45.
1. To dial a number using the speed dial, press and
hold any of the digit keys (H to O and Q).
The phone number stored in the Speed Dial List is
dialled.
22 Call Functions
Redialling
You can redial the numbers in the call log list that you
may have missed, received or dialled. Each list can
contain up to 10 numbers.
1. Press D during stand-by.
2. Press or to highlight a category between
“Dialled Numbers”, “Missed Calls” and “Received
Calls”.
3. Press or to highlight the number you wish to
call.
4. Press D to redial the call.
Automatic Redialling
This setting allows you to automatically redial the
number if the first attempt was unsuccessful.
If you wish to stop redialling, press F or C [End].
To Set the Auto Redial Function
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Call Settings”, then
press to select.
4. Press or to highlight “Auto Redial”, then
press to select.
5. Press or to highlight “On” to enable the
Auto Redial function or “Off” to disable it, then
press .
Note
• When you receive an incoming call, the Auto Redial
function is interrupted.
• Automatic redialling is not available for fax and data
calls.
Ending a Call
1. Press F to end the call.
Tip
• When the hands free is connected to the phone, you
can end calls by pressing the Answer button.
Call Functions 23
Answering a Call
When an incoming call is detected, the phone rings and
the mobile light flashes green.
1. Open your phone.
2. Press D, or
A
[Answer] to answer the call.
Or press any key except F, C [Busy], and
when the “Any Key Answer” function is enabled.
Set the Any Key Answer function in the profile of
each mode. (p. 129)
Tip
• When the hands free is connected to the phone and
the Any Key Answer function is enabled, you can
answer calls by pressing the side-up or side-down
key.
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number is displayed on
the screen. If the caller’s name and number are
stored in the Contacts List, the caller’s name and
phone number are displayed on the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When receiving a call from the person whose picture
is registered in the Contacts List, receiving display
and the picture are displayed alternately.
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
1. Press F or press and hold the side-up or side-down
key whilst the phone is ringing.
Letting the Caller Know You are Unavailable
You can send a busy tone to the caller of an incoming
call letting them know that you cannot answer the call.
1. Press C [Busy] whilst the phone is ringing.
24 Call Functions
Incall Menus
Your phone has additional functions available whilst a
call is in progress.
Adjusting the Earpiece Volume
During a call, you can adjust the earpiece volume (and
hands free volume, if connected).
1. During a call, press the side-up or side-down key to
display the Earpiece Volume screen.
2. Press the side-up key or to increase the volume
of the call or press the side-down key or to
decrease the volume.
Five levels (level 1 to 5) are selectable.
3. Press when the volume is set to the desired
level.
The phone returns to the in-call screen
automatically if left unoperated.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call whilst you
are talking to someone, you can put the current call on
hold to call someone else.
To Make Another Call during a Call
1. During a call, press A [Options] to display the
Options menu.
2. Press or to highlight “Hold”, then press
or A [Select] to select.
The current call is put on hold.
To retrieve a call, press A [Options] and press
or to highlight “Retrieve”, then press or
A
[Select] to select.
3. Enter the phone number you wish to make another
call to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of steps 1 and 2. The
current call is automatically put on hold.
Call Functions 25
Call Waiting
This service notifies you of another incoming call
whilst you have a call in progress.
1. During a call, press A [Options] and press or
to select “Hold & Answer”, then press or A
[Select] to answer the second call.
The first call is put on hold and you can now talk to
the second caller.
2. Press A [Options] and press or to highlight
“Swap Calls”, then press or A [Select] to switch
between the two calls.
3. Press A [Options] and press or to highlight
“Release Call”, then press or A [Select] to end
the current call and return to the held call.
Note
• You need to set “Call Waiting” to “On” if you use the
Call Waiting service (p. 145).
• Call Waiting service may not be available on all
networks. Contact your network operator for more
information.
• If you do not wish to answer the second call, press C
[Busy], or press A [Options], then press or
to highlight “Busy” or “Reject”, then press in
step 1. If “Reject” is selected, the call log of the
second call is saved as a missed call.
Accessing SMS Menu During a Call
1. During a call, press A[Options] and press or
to highlight “Text”, then press or A [Select]
to select.
The following options are available: “Create
Message” to make an SMS, or “Inbox”, “Sent” or
“Drafts” to access these folders. For details on SMS,
see “Text (SMS)” on page 70.
26 Call Functions
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
To Make a Conference Call
To make a conference call, you must have one active
call and one held call.
1. Press A [Options] to display the Options menu.
2. Press or to highlight “Multiparty”, then
press or
A
[Select] to select.
3. Press or to highlight “Conference All”, then
press to join the conference call.
4. Press F to end the conference call.
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step
3:
• To put all participants on hold, select “Conference
Hold All”.
• To put all participants except the current call on
hold, select “Private”.
• To end the call with all participants, select
“Release All”.
• To disconnect from the conference call but still
allow the other participants to continue talking
together, select “Transfer”.
• To put the current call on hold and continue to
have a conference call with the remaining
participants, select “Exclude”.
• To reject adding more participants to the current
party, select “Reject”, or you can send the busy
tone by selecting “Busy”.
Call Functions 27
To Add New Participants to the Conference Call
1. Press A [Options] to display the Options menu.
2. Press or to highlight “Dial”, then press
or A [Select] to select.
3. Enter the number you wish to include in the
conference call.
4. Press D to dial.
5. Press A [Options] to display the Options menu.
6. Press or to highlight “Multiparty”, then
press or
A
[Select] to select.
7. Press or to highlight “Conference All”, then
press to join the conference call.
If you wish to add other participants, repeat steps 1
to 7.
To End the Call with a Conference Call Participant
1. During a conference call, press or to
highlight the person that you wish to disconnect
from the conference call.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Release Call”, then
press or
A
[Select] to select.
To Have a Private Conversation with One of the
Participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During the conference call, press or to
highlight the person that you wish to talk to.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Multiparty”, then
press or
A
[Select] to select.
4. Press or to highlight “Private”, then press
to select.
5. Once you have finished the private conversation,
press A [Options] and highlight “Multiparty”,
then press or A [Select].
6. Press or to highlight “Conference All”, then
press to return to the conference call.
28 Call Functions
Muting the Dial Tone (DTMF Tone)
1. During a call, press A [Options] and press or
to highlight “DTMF Tones Off”, then press
or A [Select].
To unmute the dial tone, highlight “DTMF Tones
On” in step 1.
Muting the Microphone
1. During a call, press C [Mute] to mute the
microphone.
To unmute the microphone, press C [Unmute].
Entering Characters 29
Entering Characters
When entering characters to create Contacts List
entries, text messages or multimedia messages, etc.,
press the corresponding keys.
In multi-tap input method, press each key until the
desired character is displayed. For example, press H
once for the letter “A” or twice for the letter “B”.
Table of Characters
Pressing each key scrolls characters in the following
order. The order varies depending on the language
selected.
English Mode
G-O: Press and hold to enter 0 - 9 numbers.
Q
P: Press and hold to shift to Sentence mode,
Upper case, Lower case or Numeric (Abc,
ABC, abc or 123).
R: Press and hold to shift between multi-tap
and T9 mode.
Key
Upper Case
Characters
Lower Case
Characters
Numeric
G
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1
1
H
ABC2 abc2 2
I
DEF3 def3 3
J
GHI4 ghi4 4
K
JKL5 jkl5 5
L
MNO6 mno6 6
M
PQRS7 pqrs7 7
N
TUV8 tuv8 8
O
WXYZ9 wxyz9 9
Q
(space)+ = < > £ $ ¥ % &0
0
P
*+P?
R
.,?!:;-+#*
@' '' ( ) _&€ £ $
%/ ˜<>§= \ | ¥
¿¡^[ ]{ }¤ÅÄ
Æå ä æ àÇÉ è é ì
ÑñÖØöøòßÜü
ù ∆ΦΓΛΩΠΨΣΘ
Ξ (space) ↵
Key
Upper Case
Characters
Lower Case
Characters
Numeric
30 Entering Characters
Changing the Input Languages
You can change the input language on the text entry
screen.
1. On the text entry screen, press A [Options] to
display the Options menu.
2. Press or to highlight “Input Language”, then
press or
A
[Select] to select.
3. Press or to highlight the language you wish
to change, then press to select.
Changing the Input Method
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. On the text entry screen, press A [Options] to
display the Options menu.
2. Press or to highlight “Input Method”, then
press or
A
[Select] to select.
3. Press or to highlight the T9 mode (T9 Abc,
T9 ABC, T9 abc) you wish to change, then press
to select.
“ ” is displayed on the main display.
4. Press each key once for any letter you require on
that key.
To enter the word “How”, press J L O.
5. If the word shown isn’t the one you want, press
or until you highlight the correct one.
6. Press to select the word.
Note
• If the correct word is not shown in step 5, enter the
correct word again after switching to the multi-tap
input method.
Tip
• If you press Q instead of step 6, a space is inserted
next to the selected word.
Symbols and Punctuations
To enter symbols or punctuation, press R.
Entering Characters 31
Using Text Templates
You can use the sentences registered in Text Templates
when entering characters.
For details on creating the text template, see “Adding
Phrases to Text Templates” on page 98.
1. On the text entry screen, press , , or
to move the cursor to the point you wish to insert the
template.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Text Template”, then
press or
A
[Select] to select.
4. Press or to highlight the text template you
wish to use, then press to select.
The selected text template is inserted.
Copying, Cutting and Pasting Text
Using these options, you can complete editing
smoothly.
To Copy and Cut Text
1. On the text entry screen, press A [Options] to
display the Options menu.
2. Press or to highlight “Copy” or “Cut”, then
press or
A
[Select] to select.
3. Press , , or to move the cursor to the
first letter to be copied or to be cut, then press .
4. Press , , or to move the cursor to the
last letter to highlight the area, then press .
To Paste Text
1. On the text entry screen, press , , or
to move the cursor to the point you wish to paste the
letters.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Paste”, then press
or A [Select] to select.
Saved text is pasted.
32 Using the Menu
Using the Menu
Using the Main Menu
1. Press during stand-by.
The Main menu is displayed.
2. Press , , or to navigate to required
location.
3. Press to access function.
Pressing digit keys for the menu’s corresponding
number also accesses function. In this manual, the
operation to access function is described by navigation
keys operation.
To return to the previous screen, press C [Back] if the
right soft key displays [Back].
To close the Main menu, press C [Exit].
Operation Guidance
Your phone uses soft keys to help you to navigate the
phone (A and C). These keys change usage depending
on the situation. The function of each soft key at any
given time is highlighted at the bottom left and bottom
right of the screen.
The function of the centre key is displayed in the centre
at the bottom of the screen by the graphical icon.
Shortcut Keys
You can shortcut to the specified menus by pressing
and digit keys for the menu’s corresponding number on
the Main menu. See the following table for reference.
Shortcuts are listed in the headings of this manual. For
example: “M 9-1-1”.
Using the Menu 33
Example: To Access “Language” Sub Menu
Using Shortcut Keys
Press O G G.
Note
• The shortcut keys work for the first three menu levels
only.
34 Using the Menu
List of Menu Functions
* Depends on SIM card contents.
Menu No./
Main Menu
Menu No./
Sub Menu1
1 Fun & Games
1 Games & More
2 Melody Editor
2 Vodafone live!
1 Vodafone live!
2 Games
3 Ringtones
4 Pictures
5 News
6 Sport
7 Find & Seek
8 Chat
9 Search
3 Applications
1 SIM Application
*
2 Calendar
3 Alarm
4 Calculator
5 Voice Memo
6 PC Link
7 Phone Help
4 Messages
1 Multimedia
2 Tex t
3 Album
4 Vodafone Mail
5 Messenger
6 Cell Broadcasts
7 Area Info
5 Camera
1 Digital Camera
2 Video Camera
6 My Stuff
1 Games & More
2 Pictures
3 Sounds
4 Video Clips
5 Bookmarks
6 Tex t Tem p la t e s
7 Memory Status
7 Profiles
1 Normal
2 Meeting
3 Activity
4 Car
5 Silent
8 Contacts
1 Contacts List
2 Call Log
3 Speed Dial List
4 My Numbers
9 Settings
1 Phone Settings
2 Call Settings
3 Diverts
4 Date & Time
5 Network Settings
6 Internet Settings
7 Infrared
8 Security
9 Master Reset
Menu No./
Main Menu
Menu No./
Sub Menu1
Contacts List 35
Contacts List
You can store the phone numbers and e-mail addresses
of your friends, family and colleagues in the Contacts
List.
Your phone can store up to 500 entries. In a Contacts
List, you can store the following items.
Items stored in the handset memory
Name: Up to 30 characters
Phone number: Up to 40 digits, 3 phone numbers /
entry
E-mail Address: Up to 60 characters, 2 addresses /
entry
Group: Selectable from 7 groups
Address: Up to 100 characters
Note: Up to 60 characters
Items stored in the SIM memory
Name: The number of characters that can be
stored differs depending on the SIM
card you use.
Phone number: Up to 40 digits
Selecting the Contacts List Memory
You can store new entries in the Contacts Lists (either
in the phone or SIM card memory) or view currently
saved entries.
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Contacts List”, then
press to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Advanced”, then
press or A [Select] to select.
The steps to be performed after step 5 differ depending
on whether you wish to store new entries or view
Contacts List entries.
When you store new entries
6. After performing steps 1 to 5, press or to
highlight “Save to”, then press to select.
7. Press or to highlight “Handset”, “Choice”
or “SIM”, then press to select.
When selecting “Choice”, you can choose SIM card
or handset memory every time you store a new
Contacts List entry.
(M 8-1)
36 Contacts List
When you wish to change the Contacts List memory
6. After performing steps 1 to 5, press or to
highlight “Source”, then press to select.
7. Press or to highlight “Handset” or “SIM”,
then press to select.
Creating a New Entry
You can choose either the phone (up to 500) or SIM
card memory locations to store the new entry. For
switching locations, see “Selecting the Contacts List
Memory” on page 35.
The amount of phone numbers that you can store to the
SIM card is dependent on its capacity. Contact your
network operator for details.
If you create a new entry in the handset memory, you
need to enter one of the following: “Name”, “Phone
number” or “E-mail Address”. If you create a new entry
on the SIM card, you need to enter: “Phone number”.
1. Perform steps 1 to 7 in “Selecting the Contacts List
Memory” on page 35 to change the memory.
Steps 11 to 21 in this section cannot be performed if
you use the SIM card for storing a new entry.
2. Press to display the Main menu.
3. Press , , or to highlight “Contacts”,
then press to select.
4. Press or to highlight “Contacts List”, then
press to select.
5. Press A [Options] to display the Options menu.
Contacts List 37
6. Press or to highlight “Add New Contact”,
then press or
A
[Select] to select.
If you select the “Choice” option for the memory to
be used, the selection is between “Handset Entry” or
“SIM Entry”.
The “New Entry” screen is displayed.
7. Press or to move the cursor to the name
field, then press .
The name entry screen is displayed.
8. Enter a name, then press .
For details on entering characters, see “Entering
Characters” on page 29.
9. Press or to move the cursor to the phone
field, then press .
The phone number entry screen is displayed.
10.Enter the phone number, then press .
Up to 40 digits can be entered.
11.Press or to highlight a desired number type,
then press to select.
12.Press or to move the cursor to the e-mail
field, then press .
The e-mail address entry screen is displayed.
13.Enter an e-mail address, then press .
14.Press or to highlight the desired e-mail
address type, then press to select.
15.Press or to move the cursor to the group
field, then press .
The group selection screen is displayed.
16.Press or to highlight the desired group, then
press to select.
17.Press or to move the cursor to the address
field, then press .
The address entry screen is displayed.
18.Enter an address, then press .
19.Press or to highlight the desired address
type, then press to select.
20.Press or to move the cursor to the note field,
then press .
21.Enter a note, then press .
22.Press C [Save].
38 Contacts List
Adding a Thumbnail Image to Entries
You can add a thumbnail image to entries in the handset
memory.
1. Perform steps 1 to 3 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight the entry to which you
wish to add a thumbnail picture, then press to
select.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Thumbnail”, then
press or
A
[Select] to select.
5. Press or to highlight the desired picture,
then press to select.
If the picture size exceeds 240 dots [W] × 320 dots
[H], press , , or to specify the area
you wish to display, then press .
6. Press C [Save] to save the entry.
To change the picture added, select “Change” after step
4.
To remove the picture added, select “Remove” after
step 4.
Note
• If you delete an image added as a thumbnail in Saved
Pictures, the corresponding thumbnail image is also
removed.
Adding the Phone Number from Call Log
Entries
1. Display the call log entry you wish to store (p. 130).
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Save to Contacts”,
then press or A [Select] to select.
4. Follow the procedure from step 7 in “Creating a
New Entry” on page 36.
Storing an Input Phone Number
1. Enter the phone number, then press A [Save].
2. Follow the procedure from step 7 in “Creating a
New Entry” on page 36.
Contacts List 39
Copying a Single Entry from Handset to SIM
Card
You can copy a single entry from the handset memory
to the SIM card.
1. Perform steps 1 to 3 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to scroll list for selecting the name
you wish to copy, then press to select.
3. Press or to highlight the phone number you
wish to copy to the SIM card.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Copy to SIM”, then
press or
A
[Select] to select.
6. Press A [Yes].
The phone number and name selected in steps 2 and
3 are copied to the SIM card.
To cancel copying an entry, press C [No] in step 6.
Copying All Entries from SIM Card to Handset
You can copy all entries from the SIM card to the
handset memory at once.
When you insert the SIM card into your phone for the
first time and start the Contacts List application, the
confirmation screen appears automatically, asking you
if you wish to copy or not.
1. Perform steps 1 to 3 in “Selecting the Contacts List
Memory” on page 35.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Advanced”, then
press or
A
[Select] to select.
4. Press or to highlight “Copy All from SIM”,
then press to select.
5. Press A [Yes].
To cancel copying entries, press C [No] in step 5.
40 Contacts List
Finding a Name and Number
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Contacts List”, then
press to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Search”, then press
or
A
[Select] to select.
6. Enter a name or the first character(s) of the name.
Matched results are displayed alphabetically.
If there is no entry in the Contacts List that satisfies
the exact search criteria, the name that is nearest
alphabetically is displayed.
7. Press or to scroll through list for selecting
the desired name, then press .
The details screen of the Contacts List is displayed.
Tip
• You can also find the desired name and number by
entering characters using the keypad in step 4 (the
screen in step 6 is displayed).
• To view the details of the item such as address,
highlight the desired item, press A [Options], then
select “View”. Press C [Back] to go back the details
screen.
Dialling Using Contacts List Entries
Dialling from the Contacts List Screen
1. Search for the desired Contact List entry.
For details on searching through Contact List
entries, see “Finding a Name and Number”.
2. On the list screen, press or to highlight the
desired name, then press D to dial.
3. If two or more phone numbers are registered for the
selected entry, press or to highlight the
desired phone number, then press D to dial.
Tip
• You can also dial the desired phone number by
pressing the digit key corresponding to the list
number instead of step 3.
Dialling from the Contacts Details Screen
1. Search for the desired Contact List entry.
For details on searching through Contact List
entries, see “Finding a Name and Number”.
2. On the details screen, press or to highlight
the desired phone number, then press D to dial.
Contacts List 41
Tip
• If you select “SIM” for the “Source” option in
Contacts List menu (p. 35), only one phone number
entry is displayed.
• If no entries are found in the list, you can create an
entry from the list. Press A [Options]. Then follow
the procedures as described on page 36.
Editing Contacts List Entries
You can edit Contacts List entries by searching from
the Contacts List or from each Contacts List entry.
1. Search for the desired Contacts List entry.
For details on searching through Contacts List
entries, see “Finding a Name and Number” on
page 40.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Edit”, then press
or A [Select] to select.
4. Press or to move the cursor to the item you
wish to edit, then press to select.
5. When you have finished editing, press .
If you wish to edit another item, repeat steps 4 to 5.
6. Press C [Save] to save the change(s).
42 Contacts List
Deleting a Single Contacts List Entry
1. Search for a desired Contacts List entry.
For details on searching through Contacts List
entries, see “Finding a Name and Number” on
page 40.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press A [Yes].
The selected entry is deleted.
To cancel deletion, press C [No] in step 4.
Deleting All Contacts List Entries
1. Perform steps 1 to 5 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight “Delete All Entries”,
then press to select.
3. Enter your handset code, then press .
4. Press or to highlight “Handset Entries” or
“SIM Entries”, then press to select.
5. Press A [Yes].
To cancel deletion, press C [No] in step 5.
Viewing Groups
You can set group icons when storing Contacts entries
so that you can easily find and edit them.
1. Perform steps 1 to 4 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight “Group”, then press
to select.
3. Press or to highlight “View Groups”, then
press to select.
4. Press or to highlight the group name you
wish to view, then press to select.
“ ” indicates that the group has been selected.
To cancel the selected group, press again.
The checkbox becomes blank again.
Tip
• In step 4, press A [Options] to display the Options
menu, then select “Select Current Only” to view only
the selected group or “Select All” to view all groups.
Contacts List 43
Group Call
Different ringtones can be set for each group.
When you purchase this phone, groups are set to off. If
you do not set a group ringtone, the ringtone assigned
in the Profiles is used.
1. Perform steps 1 to 4 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight “Group”, then press
or A [Select] to select.
3. Press or to highlight “Group Call”, then
press to select.
4. Press or to highlight the group you wish to
set, then press to select.
5. Press or to highlight “On”, then press to
select.
6. Press or to highlight “Assign Melody”, then
press to select.
7. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
8. Press or to highlight a ringtone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Vibration”, then press
to select.
10.Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
For details on setting the vibration, see “Vibration”
on page 126.
11.When setting is complete, press A [OK].
Tip
• To cancel the ringtone setting, select “Off” in step 5.
Ringtone
A specified ringtone or vibration setting can be
associated to a pre-registered entry.
1. Perform steps 1 to 3 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight the entry you wish to
set, then press to select.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Ringtone”, then press
or A [Select] to select.
5. Press or to highlight “On”, then press to
select.
6. Press or to highlight “Assign Melody”, then
press to select.
44 Contacts List
7. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
8. Press or to highlight a ringtone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Vibration”, then press
to select.
10.Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
For details on setting the vibrator, see “Vibration”
on page 126.
11.Press A [OK].
12.When setting is complete, press C [Save].
Tip
• To cancel the ringtone setting, select “Off” in step 5.
Memory Status
This function helps you to check the number of entries
stored in the Contacts List.
1. Perform steps 1 to 4 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to highlight “Memory Status”, then
press to select.
You can check the memory status of the SIM card
and handset.
Contacts List 45
Speed Dial List
You can set a maximum of 9 phone numbers in the
Speed Dial List.
Setting Contacts List entries in the Speed Dial List
1. Search for the desired Contacts List entry and
display the details screen.
For details on searching through Contacts List
entries, see “Finding a Name and Number” on
page 40.
2. Press or to highlight the phone number you
wish to set in the Speed Dial List.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Add to Speed Dial”,
then press or
A
[Select] to select.
5. Press or to highlight the number you wish to
set, then press to select.
Tip
• The nine digit keys correspond to list numbers.
Viewing the Speed Dial List
For details on viewing the speed dial list, see “Speed
Dial List” on page 135.
For details on how to use the speed dial list, see “Speed
Dialling” on page 21.
Sending Messages
1. Search for the desired Contacts List entry and
display the details screen.
For details on searching through Contacts List
entries, see “Finding a Name and Number” on
page 40.
2. Press or to highlight the desired phone
number or e-mail address of the recipient.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Send Message”, then
press or A [Select] to select.
5. Press or to highlight “Multimedia” or
“Text”, then press to select.
If you have moved the cursor to the “E-mail” field
after step 1, “Multimedia” is selected automatically.
6. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59 or “Creating a New SMS”
on page 70.
46 Contacts List
Swapping Location Number of the
Phone Number
This function is only for entries stored on the SIM card.
1. Perform steps 1 to 3 in “Selecting the Contacts List
Memory” on page 35.
2. Press or to scroll through list for selecting
the desired name, then press to select.
3. Press or to highlight the desired phone
number.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Swap”, then press
or A [Select] to select.
6. Enter the location number you wish to swap, then
press to select.
Camera 47
Camera
Your phone incorporates an integrated digital camera.
This allows you to take and send pictures or video clips
wherever you are.
Digital Camera
Put the phone into the digital camera mode to take a
picture.
You can send the pictures registered in Saved Pictures
with your message.
Picture are saved in JPEG format in the following three
picture sizes.
Large: 480 × 640 dots
Medium: 240 × 320 dots
Small: 120 × 160 dots
Taking Pictures
1. Press to display the Main menu.
2. Press , , or to highlight “Camera”,
then press to select.
3. Press or to highlight “Digital Camera”, then
press to select.
The preview is displayed through the main display.
4. Press or the side-down key to take the picture.
The shutter sounds and the still image of the taken
picture is displayed.
5. Press A [Save].
“Saving to My Stuff…” is displayed, then the
picture is registered.
If you wish to send a picture by multimedia message
after taking the picture, press before step 5.
6. Press F to return to stand-by.
Tip
• Pressing C during stand-by also activates digital
camera mode.
• To leave digital camera mode without registering the
taken picture after step 4 in “Taking Pictures”:
Press F and Press
A
[Yes].
• When the distance to the subject is approximately 5
cm, set the macro dial to the macro position ( ).
When the distance to the subject is approximately 40
cm or more, set the macro dial to the normal position
().
(M 5)
(M 5-1)
48 Camera
To Switch the Viewfinder
You can switch the viewfinder from the main display to
the external display for taking a self-portrait.
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
When you use the external display as the viewfinder,
the taken pictures are saved automatically.
Taking Close-up Pictures
1. In digital camera mode, set the macro dial to the
macro position ( ).
2. Press or the side-down key to take the picture.
To cancel macro mode, set the macro dial to the
normal position ( ).
Using the Zoom Function
Zooming ratio can be altered between “×1”, “×2”, and
“×4”. Press or to change the zooming ratio.
Note
• When “Picture Size” is set to “Small”, you can use
the zoom function in three magnifications (×1, ×2,
×4).
• When “Picture Size” is set to “Medium”, you can use
the zoom function in two magnifications (×1, ×2).
• When “Picture Size” is set to “Large”, you cannot
use the zoom function.
Selecting the Picture Size
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Picture Size”, then
press or A [Select] to select.
3. Press or to highlight the picture size, then
press to select.
Selecting the Picture Quality
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Picture Quality”, then
press or A [Select] to select.
3. Press or to highlight “Normal” or “Fine”,
then press to select.
Camera 49
Retaking Pictures
After steps 1 to 4 in “Taking Pictures” on page 47, press
C [Cancel].
Further shooting is available.
Note
• The digital camera uses a CCD sensor. Although this
camera has been manufactured to the highest
specifications, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
3 or less, the remaining shots indicator in the upper left
of the screen turns red. (The number of pictures that can
be taken is approximate.)
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Memory
full. You cannot take a picture!” is displayed.
Meanings of Indicators in Digital Camera Mode
Remaining shots indicator
123: Indicates the remaining number of pictures
that can be taken.
Flash light indicators (p. 53)
Indicates when the flash light is turned on.
: Normal mode
: Macro mode
Delay timer indicator (p. 51)
: Indicates when Timer is set.
Continuous shooting indicators (p. 51)
Picture size indicators (p. 48)
Large: 480 × 640 dots
Medium (default): 240 × 320 dots
Small: 120 × 160 dots
:
When pictures are taken in continuous shoot-
ing mode, these indicators appear on the
screen.
50 Camera
Picture quality indicators (p. 48)
Indicates the quality (normal or fine) of the picture
to be taken.
:Fine
:Normal
Picture brightness (exposure level) indicators (p. 50)
:Bright
:
:Normal
:
:Dark
Zooming ratio indicators (p. 48)
Indicates the magnification (×1, ×2, ×4).
:Original size
: Double size
: Quadruple size
Making Adjustments According to Lighting
Conditions
To Adjust the Brightness of the Picture
Press or to adjust the brightness of the picture.
Once the phone has returned to the stand-by screen the
brightness settings return to default.
Viewing the Taken Pictures
Taken pictures can be viewed in Saved Pictures.
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “My Pictures”, then
press or
A
[Select] to select.
The list of Saved Pictures is displayed.
3. Press or to highlight the file name you wish
to view, then press to select.
The selected picture is displayed.
4. Once you have finished, press C [Back] to return to
the list.
Tip
• Your pictures are given file names which are
“pic_nnn.jpg” (nnn is a three-digit consecutive
number).
The file name, date and size of your pictures are
displayed in the list of Saved Pictures.
Camera 51
Using the Timer
To Take a Picture with the Timer
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Delay Timer”, then
press or
A
[Select] to select.
3. Press or to highlight “On”, then press to
select.
“ ” is displayed on the screen and the phone
returns to digital camera mode.
4. Press or the side-down key to start the delay
timer.
10 seconds after the timer sounds, the shutter
sounds, and the camera takes a picture.
Note
• Whilst the delay timer is operating, the flash light and
the indicator flash.
• If or the side-down key is pressed whilst the delay
timer is operating, the picture is taken instantly.
• The zoom function with or , or brightness
adjustment of the picture with or , is
unavailable whilst the delay timer is operating.
• If you wish to stop taking pictures with the timer,
press C [Cancel] whilst the delay timer is operating.
Cancelling the Delay Timer
1.
Press
A
[Options] whilst the delay timer setting is on.
The Options menu is displayed.
2. Press or to highlight “Delay Timer”, then
press or
A
[Select] to select.
3. Press or to highlight “Off”, then press to
select.
“” goes off.
Continuous Shooting
Four pictures are taken in succession. Auto Shooting
and Manual Shooting are available.
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Continuous
Shooting”, then press or A [Select] to select.
3. Press or to highlight “Auto Shooting” or
“Manual Shooting”, then press to select.
To cancel Continuous Shooting, select “Off”.
4. Press or the side-down key to start continuous
shooting.
Auto Shooting: Four pictures are taken in a row
by pressing or the side-
down key.
52 Camera
Manual Shooting: Pictures are taken one by one by
pressing or the side-down
key.
When the Continuous Shooting is completed, the
taken pictures are saved automatically.
To stop Continuous Shooting, press
C
[Cancel].
Note
• When “Picture Size” is set to “Large”, you cannot
use the Continuous Shooting function.
• When you select a frame for taking pictures, you
cannot use the Continuous Shooting function.
Selecting a Frame
You can select the frame from preset patterns. You can
also select a frame in Saved Pictures.
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Add Frame”, then
press or
A
[Select] to select.
3. Press or to highlight “Preset Frames” or
“My Pictures”, then press to select.
4. Press or to highlight the frame you wish to
use, then press to select.
Note
• When “Picture Size” is set to “Large”, you cannot
use the Frame function.
• When you activate the Continuous Shooting function,
you cannot use the Frame function.
• Only the images of PNG format can be selected as the
frame if you select “My Pictures” in step 3.
Camera 53
Selecting Light Colour
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Light Colour”, then
press or
A
[Select] to select.
3. Press or to highlight the desired colour, then
press to select.
To turn off the flash light, select “Off”.
Tip
• Each time R or the side-up key is pressed, the status
of the flash light changes as follows.
Off
→
On (brightness for normal mode: )
→
On
(brightness for macro mode: )
→
Off
• If you do not operate your phone for approximately
one minute, the flash light turns off automatically to
save the power.
Selecting the Shutter Sound
You can select the shutter sound from 3 preset patterns.
1. In digital camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Shutter Sound”, then
press or
A
[Select] to select.
3. Press or to highlight the desired sound, then
press to select.
To play back the shutter sound, press A [Play] in
step 3.
Sending Pictures
To send your picture to another phone or e-mail
address, see “Sending Messages” on page 91 for
instructions.
Deleting Pictures
See “Deleting Pictures” on page 91 for instructions.
54 Camera
Video Camera
Put the phone into the video camera mode to record a
video clip.
You can send video clips registered in Saved Video
Clips with your message.
Video clips are saved in “.3gp” format.
Recording Video Clips
Sound can be recorded with the video clip.
1. Press to display the Main menu.
2. Press , , or to highlight “Camera”,
then press to select.
3. Press or to highlight “Video Camera”, then
press to select.
The preview is displayed through the main display.
4. Press or the side-down key to start recording the
video clip.
The sound for recording the video clip occurs.
If you press or the side-down key again, or when
the recording is completed, the sound for ending the
video clip recording occurs and the display transits
to step 5.
5. Press or to highlight “Save”, then press
to select.
“Saving to My Stuff…” is displayed, then the video
clip is registered.
If you preview a video clip before saving, select
“Preview” in step 5.
If you wish to send a video clip by multimedia
message after recording the video clip, select “Send
Message” in step 5.
To Switch the Viewfinder
Press P when the preview is displayed through the
main display.
Each time you press P, the viewfinder switches
between the external display and the main display.
Recording Close-up Video Clips
1. In video camera mode, set the macro dial to the
macro position ( ).
2. Press or the side-down key to start recording the
video clip.
To cancel macro mode, set the macro dial to the
normal position ( ).
(M 5-2)
Camera 55
Using the Zoom Function
Zooming ratio can be altered. Press or to
change the zooming ratio.
Selecting Video Quality
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Video Quality”, then
press or
A
[Select] to select.
3. Press or to highlight “Normal” or “Fine”,
then press to select.
In the Case of No Available Memory
When the number of video clips that can be recorded
becomes 3 or less, the remaining sets indicator in the
upper left of the screen turns red. (The number of sets
that can be recorded is approximate.)
When the number of video clips that can be recorded
becomes 0, and when you try to record a video clip
again, “Memory full. You cannot record a video!” is
displayed.
Meanings of Indicators in Video Camera Mode
Remaining sets indicator
123: Indicates the remaining sets of video clips
that can be recorded.
Flash light indicators (p. 58)
Indicates when the flash light is turned on.
: Normal mode
: Macro mode
Delay timer indicator (p. 57)
: Indicates when Timer is set.
Video camera indicator
: Displays when the phone is in video camera
mode.
Video quality indicators (p. 55)
Indicates the quality (normal or fine) of the video
clip to be recorded.
:Fine
:Normal
56 Camera
Video brightness (exposure level) indicators (p. 56)
:Bright
:
:Normal
:
:Dark
Zooming ratio indicators (p. 55)
Indicates the magnification (×1, ×2, ×4).
:Original size
: Double size
: Quadruple size
Making Adjustments According to Lighting
Conditions
To Adjust the Brightness of the Video Clips
Press or to adjust the brightness of the video
clip.
Once the phone has returned to the stand-by screen, the
brightness settings return to default.
Viewing Recorded Video Clips
Recorded video clips can be viewed in Saved Video
Clips.
1. In video camera mode, press A [Options].
2. Press or to highlight “My Video Clips”,
then press or
A
[Select] to select.
The list of Saved Video Clips is displayed.
3. Press or to highlight the file name you wish
to view, then press to select.
4. Press .
The selected video clip is played back.
To pause playback, press .
To resume playback, press again.
To stop playback, press
C
[Back].
To display the video clip in actual size, press
A
[×1].
Camera 57
5. Once you have finished, press C [Back] to return to
the list.
Tip
• Your video clips are given file names which are
“mov_nnn.3gp” (nnn is a three-digit consecutive
number).
The file name, date and size of your video clips are
displayed in the list of Saved Video Clips
• If the video clip has been recorded with sound, the
volume can be adjusted by pressing or .
• The volume depends on the settings of Ringer Volume
(p. 125). The volume becomes 0 when “Ringer
Volume” is set to “Silent” or “Step Tone”.
Using the Timer
To Record a Video Clip with the Timer
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Delay Timer”, then
press or
A
[Select] to select.
3. Press or to highlight “On”, then press to
select.
“ ” is displayed on the screen and the phone
returns to video camera mode.
4. Press or the side-down key to start the delay
timer.
10 seconds after the timer sounds, the camera starts
recording the video clip.
Note
• Whilst the delay timer is operating, the flash light and
the indicator flash.
• If or the side-down key is pressed whilst the delay
timer is operating, the video clip is recorded
instantly.
• The zoom function with or , or brightness
adjustment of the video with or , is
unavailable whilst the delay timer is operating.
• If you wish to stop recording video clips with the
timer, press C [Cancel] whilst the delay timer is
operating.
Cancelling the Delay Timer
1. Press A [Options] whilst the delay timer setting is
on.
The Options menu is displayed.
2. Press or to highlight “Delay Timer”, then
press or
A
[Select] to select.
3. Press or to highlight “Off”, then press to
select.
“” goes off.
58 Camera
Recording Video Clips with Sound
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Voice Record”, then
press or
A
[Select] to select.
3. Press or to highlight “On”, then press to
select.
To cancel recording video clips with sound, select
“Off” in step 3.
Selecting Light Colour
1. In video camera mode, press A [Options].
The Options menu is displayed.
2. Press or to highlight “Light Colour”, then
press or
A
[Select] to select.
3. Press or to highlight the desired colour, then
press to select.
To turn off the flash light, select “Off”.
Tip
• Each time R or the side-up key is pressed, the status
of the flash light changes as follows.
Off
→
On (brightness for normal mode: )
→
On
(brightness for macro mode: )
→
Off
• If you do not operate your phone for about one
minute, the flash light turns off automatically to save
power.
Sending Video Clips
To send your video clips to another phone or e-mail
address, see “Sending Messages” on page 96 for
instructions.
Deleting Video Clips
See “Deleting Video Clip files” on page 97 for
instructions.
Messages 59
Messages
Your phone allows you to send and receive text
messages or multimedia messages and to receive WAP
alerts.
Multimedia (MMS)
About Multimedia Messaging
Multimedia Messaging Service (MMS) allows you to
send and receive multimedia messages with graphical
images, photographs, sound, animations or video clips
attached.
Note
• Some MMS functions may not always be available
depending on your network. Contact your network
operator for more information.
Creating a New MMS
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Create Message”,
then press to select.
4. Enter your message, then press .
5. Enter the phone number or e-mail address of the
recipient, then press .
If you wish to select a phone number or e-mail
address in the Contacts List, search for the desired
Contacts List entry.
Press A [Options] and press or to highlight
“Add Contact” to search the number or e-mail
address by name or press or to search in
alphabetical order, then press or
A
[Select]. For
details on searching the Contacts List entries, see
“Finding a Name and Number” on page 40.
6. Press or to highlight “Send”, then press
to select.
The message is put in the Outbox and sent.
After the message is sent, the message is moved to
the Sent box.
Note
• The current message size displayed whilst you are
creating the message is an approximation.
• If a message cannot be sent for some reason, the
message stays in the Outbox and “ ” is displayed
on the stand-by screen.
(M 4)
(M 4-1)
(M 4-1-1)
60 Messages
To Enter the Subject of the Message
1. Perform steps 1 to 5 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Subject”, then press
to select.
3. Enter the subject of your message, then press .
Note
• This phone allows you to enter up to 40 characters as
the subject, and enter up to 20 addresses (for To and
Cc).
However, these may be limited depending on your
network. In this case, you may not be able to send
MMS.
Contact your network operator for more information.
To Send a Message Template MMS
Your phone provides message templates with an image
and voice attachment that help you create easily.
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 59.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Message Template”,
then press or A [Select] to select.
A confirmation screen asking whether you wish to
discard the current text is displayed.
4. Press A [Yes] to discard.
To cancel, press C [No] in step 4.
5. Press or to highlight a template you wish to
send, then press to select.
6. Perform steps 4 to 6 in “Creating a New MMS” on
page 59.
Note
• Selecting “Message Template” deletes messages or
images you have entered or attached. To prevent
deletion, select “Message Template” first, then enter
messages.
Messages 61
To Add Recipients
1. Perform steps 1 to 5 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Add Contact”, then
press to select.
3. Press or to highlight “To” to add recipients
or “Cc” to send a copy of this MMS to other
recipients, then press to select.
4. Press or to highlight a desired number from
the list, then press to select.
5. Enter the phone number or e-mail address of the
other recipients, then press .
6. Press C [Back] twice.
To Use the Text Template
For details on creating text templates, see page 98.
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 59.
2. Press , , or to move the cursor to the
point you wish to insert the template.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Text Template”, then
press or
A
[Select] to select.
5. Press or to highlight the desired template
from the list, then press to select.
To Save a Message in the Drafts Box
You can save a message in the Drafts box temporarily
and send it later.
1. Perform steps 1 to 5 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Save to Drafts”, then
press to save the message in the Drafts box.
Note
• You can send it later following the instructions in
“Sending a Message in the Drafts Box” on page 63.
62 Messages
Turning the Slide Show Setting On or Off
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Settings”, then press
to select.
4. Press or to highlight “Slide Show”, then
press to select.
5. Press or to highlight “On” or “Off”, then
press to select.
If You Select “On”
• You can create messages which have up to 10 slides.
Each slide can contain one picture, one sound file
and up to 1000 characters of text (up to the message
total 100 Kbytes limit).
• The slide control options available are:
Add: To add a new slide.
Remove: To remove the active slide.
Previous: To navigate to the previous slide.
Next: To navigate to the next slide.
• EVA (e-Animation file) and video clip data cannot be
attached as slide data to the message.
If You Select “Off”
• You can attach a maximum of 20 pictures, sounds or
video clips and up to 100 Kbytes in total.
Inserting Attached Data
You can send pictures, sounds and video clips saved in
Saved Pictures, Saved Sounds or Saved Video Clips
attached to multimedia messages. When attaching
video clips, “Slide Show” must be set to “Off”.
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Create Message”,
then press to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Picture”, “Sound” or
“Video Clip”, then press or A [Select] to select.
6. Press or to highlight the file name you wish
to attach, then press to select.
The selected picture/sound/video clip is attached.
When attaching is complete, press
C
[Back] to
return to the message creation screen.
7. Press A [Back] to continue editing your message.
Messages 63
To Add Attached Data
You can perform the following with the slide show
setting off.
1. Perform step 1 to 5 in “Inserting Attached Data” on
page 62.
The list of attached data is displayed.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Add Picture”, “Add
Sound” or “Add Video Clip”, then press or A
[Select] to select.
4. Press or to highlight the file name you wish
to attach, then press .
5. Press C [Back].
To Remove Attached Data
1. Perform steps 1 to 5 in “Inserting Attached Data” on
page 62.
The list of attached data is displayed.
2. Press or to highlight the file name you wish
to remove, then press A [Options].
3. Press or to highlight “Remove”, then press
or
A
[Select] to select.
4. Press A [Yes].
To cancel removal, press C [No] in step 4.
Sending a Message in the Drafts Box
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Drafts”, then press
to select.
4. Press or to highlight the message you wish
to send in the Drafts box, then press A [Options].
The Options menu is displayed.
5. Press or to highlight “Edit Message”, then
press or
A
[Select] to select.
6. Modify the message, then press .
7. Modify the phone number or e-mail address of the
recipients, then press .
8. Press or to highlight “Send”, then press
to select.
Note
• You cannot modify a Slide Show message that is
created on another phone as shown in step 6. Go to
step 7.
64 Messages
Reading MMS
Messages you receive are stored in the Inbox.
Incoming Messages
The MMS indicator ( ) will appear when you are
receiving an incoming message.
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Inbox”, then press
to select.
Messages that are marked with a clip denote mails
with attachments.
4. Press or to highlight the message you wish
to view, then press to select.
The message is displayed.
5. Press or to scroll the screen to read the
message.
6. When you finish viewing, press .
To Check the Sender and Receiver Phone
Number or E-mail Address
1. Perform steps 1 to 3 in “Incoming Messages”.
2. Press or to highlight the desired message,
then press A [Options] to display the Options
menu.
3. Press or to highlight “Details”, then press
or
A
[Select] to select.
The sender’s phone number or e-mail address, time
and date stamp, subject and size are displayed.
Messages 65
Replying to a Message from the Sender from
the Inbox
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Inbox”, then press
to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Reply”, then press
or A [Select] to select.
6. Enter your message.
For details on entering characters, see “Entering
Characters” on page 29.
7. Press .
The phone number or e-mail address of the recipient
is automatically filled in the sender’s phone number
or e-mail address.
8. Press .
The subject field is automatically filled in with the
original subject preceded by “Re:”.
9. Press or to highlight “Send”, then press
to select.
Tip
• You can reply to a message to all addresses of
selected messages by selecting “Reply All” in step 5.
Forwarding a Message
1. Perform steps 1 to 4 in “Replying to a Message from
the Sender from the Inbox”.
2. Press or to highlight “Forward”, then press
to select.
3. Enter the phone number or e-mail address of the
recipient, then press .
If you wish to select the phone number or e-mail
address in the Contacts List, search for the desired
Contacts List entry.
Press A [Options] and press or to highlight
“Add Contact” to search the number or e-mail
address by name or press or to search in
alphabetical order, then press or
A
[Select]. For
details on searching the Contacts List entries, see
“Finding a Name and Number” on page 40.
4. Press or to highlight “Send”, then press
to select.
66 Messages
Note
• When a message with attached data is forwarded the
data is also sent. However, if there is any data which
the phone recognises as having copyright, then it will
not be sent.
• The “Subject” field is automatically filled in with the
original subject preceded by “Fw:”.
The original message cannot be changed.
Modifying a Message
1. Perform steps 1 to 4 in “Replying to a Message from
the Sender from the Inbox” on page 65.
2. Press or to highlight “Edit Message”, then
press to select.
3. Modify the message.
4. Press .
5. Press or to highlight “Send”, then press
to select.
Note
• Messages cannot be edited if they contain particular
data such as Slide Show, XHTML, copyrights or an
unknown format.
Storing the Phone Number or E-mail Address
of a Sender in the Contacts List
1. Perform steps 1 to 4 in “Replying to a Message from
the Sender from the Inbox” on page 65.
2. Press or to highlight “Save to Contacts”,
then press to select.
For details on entering a name, see “Creating a New
Entry” on page 36.
Retrieving MMS
When “ ” is in the Inbox, the following can be done.
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Inbox”, then press
to select.
3. Press or to highlight the alert you wish to
download.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Download”, then
press or
A
[Select] to select.
Tip
• You can press instead of steps 4 and 5 to start
downloading.
Messages 67
Re-sending a Message in the Outbox
If a message cannot be sent for some reason, the
message stays in the Outbox. Messages in the Outbox
can be resent.
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Outbox”, then press
to select.
3. Press or to highlight the message you wish
to re-send in the Outbox, then press A [Options].
4. Press or to highlight “Re-send”, then press
or
A
[Select] to select.
Confirming Arrival of Delivery Report
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Sent”, then press
to select.
3. Press or to highlight the message of which
you wish to confirm arrival of delivery report, then
press
A
[Options] to display the Options menu.
4. Press or to highlight “Delivery Report”,
then press or
A
[Select] to select.
This menu is available only for sent messages that
have the “Delivery Report” set to “On”. For details
on selecting “Delivery Report”, see “Setting Up
MMS” on page 69.
(M 4-1-5)
68 Messages
Deleting Messages
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Inbox”, “Sent”,
“Drafts” or “Outbox”, then press to select.
3. Press or to highlight the message you wish
to delete, then press A [Options].
The Options menu is displayed.
4. Press or to highlight “Delete”, then press
or
A
[Select] to select.
The confirmation screen is displayed.
5. Press or to highlight “One Message” or “All
Messages”, then press to select.
6. Press A [Yes].
To cancel deletion, press C [No] in step 6.
Note
• You cannot delete locked messages.
To Lock Message
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 59.
2. Press or to highlight “Inbox” or “Sent”, then
press to select.
3. Press or to highlight the message you wish
to lock, then press A [Options].
The Options menu is displayed.
4. Press or to highlight “Lock/Unlock”, then
press or
A
[Select] to select.
Making a Call to the Sender of a Message
You can make a call to the sender of a message in the
Inbox whose address (From) is the phone number.
1. Perform steps 1 to 3 in “Replying to a Message from
the Sender from the Inbox” on page 65.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Call Sender”, then
press or A [Select] to select.
Messages 69
Setting Up MMS
1. Press A during stand-by.
2. Press or to highlight “Multimedia”, then
press to select.
3. Press or to highlight “Settings”, then press
to select.
4. Press or to highlight the desired item, then
press to select.
The items available are:
• Roam. Download:
Defers MMS download method when roaming
outside of your network.
• Delivery Rep. Allow:
Enables Delivery Report when receiving a
message which applies to the Delivery Report
function.
• Anonymous Reject:
Rejects a messages from an unknown or empty
address name.
• Auto Delete:
Deletes the oldest message automatically, when the
Sent is full.
• Slide Show:
Enables Slide Show when sending a message.
• Advanced
• Priority:
Prioritises composed messages.
• Delivery Report:
Enables Delivery Report.
•Expiry Time:
Sets Expiry Time for a message to be stored in
the Server.
• Sender Visibility:
Displays the information about the sender.
• Slide Interval:
Sets the slide display time when sending a
message.
5. Change each item.
6. When you finish setting, press C [Back].
(M 4-1-6)
70 Messages
Text (SMS)
About Text Messaging
The Short Message Service (SMS) allows you to send
text messages of up to 1024 characters to other GSM
users.
To Use SMS with Your Phone
Messages longer than 160 characters may be
composed. During sending, the messages are split. If
the receiver has a suitable phone the messages
recombines during reception, if not your message
appears as a number of separate 152 characters
messages.
You can send or receive SMS even if you are talking on
the phone.
You can also use Text Templates to help you compose
SMS.
Creating a New SMS
1. Press A during stand-by.
2. Press or to highlight “Text”, then press
to select.
3. Press or to highlight “Create Message”,
then press to select.
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 29.
5. Press .
To Use the Text Template
For details on creating text templates, see “Text
Templates” on page 98.
1. Perform steps 1 to 3 in “Creating a New SMS”.
2. On the text entry screen, press , , or
to move the cursor to the point you wish to insert the
template.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Text Template”, then
press or
A
[Select] to select.
5. Press or to highlight the desired template
from the list, then press to select.
To Save the Message in the Drafts box
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the phone number of the recipient, then press
.
3. Press or to highlight “Save to Drafts”, then
press to select.
(M 4-2)
(M 4-2-1)
Messages 71
Sending a Message
1. Press A during stand-by.
2. Press or to highlight “Text”, then press
to select.
3. Press or to highlight “Create Message”,
then press to select.
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 29.
5. Press .
6. Enter the phone number of the recipient, then press
.
If you wish to select the phone number in the
Contacts List, search for the desired Contacts List
entry.
Press A [Options] and then press or to
highlight “Add Contact” to search the number
by name or press or to search in alphabetical
order, then press or A [Select]. For details on
searching the Contacts List entries, see “Finding a
Name and Number” on page 40.
7. Press or to highlight “Send”, then press
to select.
The phone begins the sending process and the SMS
is sent. After the message has been sent, the
message is added to the Sent box.
Note
• When you send a message of more than 160
characters, the confirmation message is displayed.
Press A [Yes] to send or C [No] to cancel.
72 Messages
To Add Recipients
1. Perform steps 1 to 6 in “Sending a Message” on
page 71.
2. Press or to highlight “Add Contact”, then
press to select.
3. Press or to highlight an item number for
adding recipie
nt’s phone number, then press to
select.
4. Enter the phone number to add, then press .
5. When adding recipients is complete, press C
[Back].
Follow the procedure from step 7 in “Sending a
Message” on page 71.
Reading SMS
Incoming Messages
The SMS indicator ( ) will appear when an incoming
message arrives.
1. When you receive a SMS, press during stand-
by.
2. Press or to highlight the message you wish
to view.
The sender’s phone number and a part of the
message are displayed. When the sender’s phone
number is stored in the Contacts List, the sender’s
name is displayed instead of the phone number.
Messages are marked with “ ” denote unread
messages. If the Inbox, Sent box or Drafts box is
full, “ ” is displayed. Delete unnecessary
messages.
3. Press .
4. Press or to scroll the screen to read the
message.
5. When you have finished viewing, press F.
Replying to the Sender
1. Perform steps 1 to 3 in “Reading SMS”.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Reply”, then press
or A [Select] to select.
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 29.
5. Press .
Follow the procedure from step 6 in “Sending a
Message” on page 71.
Messages 73
Calling the Message Sender
1. Perform steps 1 to 3 “Reading SMS” on page 72.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Call Sender”, then
press or
A
[Select] to select.
Forwarding a Message
1. Perform steps 1 to 3 in “Reading SMS” on page 72.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Forward”, then press
or
A
[Select] to select.
4. Enter the phone number of the recipient, then press
.
For details on searching the Contacts List entries,
see “Finding a Name and Number” on page 40.
5. Press or to highlight “Send”, then press
to select.
6. Follow the procedure from step 7 in “Sending a
Message” on page 71.
The phone begins the sending process and the SMS
is sent.
Modifying a Message
1. Perform steps 1 and 2 in “Creating a New SMS” on
page 70.
2. Press or to highlight “Inbox”, “Sent” or
“Drafts”, then press to select.
3. Press or to highlight the message you wish
to modify, then press to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Edit”, then press
or A [Select] to select.
6. Modify the message, then press .
Follow the procedure from step 6 in “Sending a
Message” on page 71.
74 Messages
Deleting Messages
1. Perform steps 1 and 2 in “Creating a New SMS” on
page 70.
2. Press or to highlight “Inbox”, “Sent” or
“Drafts”, then press to select.
3. Press or to highlight the message you wish
to delete, then press to select.
4. Press A [Options] to display the Options menu.
5. Press or to highlight “Delete”, then press
or
A
[Select] to select.
6. Press or to highlight “One Message” or “All
Messages”, then press to select.
7. Press A [Yes].
The selected message or all messages are deleted.
To cancel deletion, press C [No] in step 6.
Extracting Phone Numbers from the Received
Messages and Making a Call
You can make a call using the phone number embedded
in the received SMS message.
1. Perform steps 1 and 2 in “Reading SMS” on
page 72.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Extract Numbers”,
then press or A [Select] to select.
Telephone numbers embedded in the message are
displayed.
4. Press or to highlight the number, then press
A [Options] to display the Options menu.
5. Press or to highlight “Make Call”, then
press to select.
To save this phone number in the Contacts List,
press or to highlight “Save to Contacts”,
then press to select.
For details on entering a name, see “Creating a New
Entry” on page 36.
Messages 75
Tip
• Selecting “Save to Contacts” in step 3 instead allows
you to go to the phone number entry screen with the
sender’s number entered.
For details on entering a name, see “Creating a New
Entry” on page 36.
Setting Up SMS
To Set Up the Service Centre Address
1. Press A during stand-by to display the Message
menu.
2. Press or to highlight “Text”, then press
to select.
3. Press or to highlight “Settings”, then press
to select.
4. Press or to highlight “Message Centre”,
then press to select.
5. Enter the centre number.
If you wish to enter a country code for a message to
an international number, press and hold P until a
“+” sign is displayed.
6. Press .
Message Lifetime
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient.
During this period, the message service centre will
continually try to deliver the message to the recipient.
1. Perform steps 1 to 3 in “Setting Up SMS”.
2. Press or to highlight “Message Lifetime”,
then press to select.
3. Press or to highlight the validity period,
then press to select.
Message Format
1. Perform steps 1 to 3 in “Setting Up SMS”.
2. Press or to highlight “Message Format”,
then press to select.
3. Press or to highlight the message format,
then press to select.
(M 4-2-5)
76 Messages
Connection Type
1. Perform steps 1 to 3 in “Setting Up SMS” on
page 75.
2. Press or to highlight “Connection Type”,
then press to select.
3. Press or to highlight the connection type,
then press to select.
Optimisation
When set “On” (default), double-byte characters such
as European characters with an accent are converted
into single-byte characters and sent.
When “Off”, double-byte characters are sent as
displayed.
Please note that you may be charged double for double-
byte characters sent in an SMS when Optimisation is set
“Off”.
1. Perform steps 1 to 3 in “Setting Up SMS” on page
75.
2. Press or to highlight “Optimisation”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Cell Broadcasts
You can receive Cell Broadcast messages or general
messages such as weather forecasts and traffic reports.
This information is broadcast to subscribers in certain
network areas.
This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
Enabling/Disabling Cell Broadcasts (M 4-6-1)
1. Press A during stand-by.
2. Press or to highlight “Cell Broadcasts”, then
press to select.
3. Press or to highlight “On/Off”, then press
to select.
4. Press or to highlight “On” to set Cell
Broadcasts on or “Off” to set it off, then press to
select.
(M 4-6)
Messages 77
Reading Cell Broadcast Messages (M 4-6-2)
1. When you receive a Cell Broadcast message, press
.
2. Press or to scroll the screen to read the
message.
3. When you finish viewing, press F.
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
1. Press A during stand-by.
2. Press or to highlight “Cell Broadcasts”, then
press to select.
3. Press or to highlight “Settings”, then press
to select.
4. Press or to highlight “Set Info Subjects”,
then press to select.
5. Press or to highlight “Add/Remove”, then
press to add the channel.
6. Press or to highlight the desired page, then
press to select.
7. Press C [Back].
Tip
• If the desired page is not in the list that appears in
step 6, select “Create Subject” in step 5, then enter
the subject code to add a page. For details on the
subject code, contact your service provider.
Setting Languages
Allows you to select your preferred language for the
cell broadcast message display.
1. Perform steps 1 to 3 in “Subscribing to Cell
Broadcasts”.
2. Press or to highlight “Language”, then press
to select.
3. Press .
The language list is displayed.
4. Press or to highlight the language you wish
to set, then press to select.
5. Press C [Back] to exit.
(M 4-6-3)
78 Messages
Area Info
The Area Info is the message information that operators
sent to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed on the stand-by screen.
Note
• This function may not be available on all mobile
phone networks. Contact your network operator for
more information.
Enabling/Disabling Area Info
1. Press A during stand-by.
2. Press or to highlight “Area Info”, then press
to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Note
• If Area Info is set to “On”, the stand-by time will
decrease.
(M 4-7)
Vodafone live! 79
Vodafone live!
Your phone is already configured to access Vodafone
live! and the mobile internet*.
Vodafone live! is a new mobile internet portal which is
your gateway to a new world of information, games,
music and services.
Because your phone uses GPRS, a system that is much
faster than previous ways of getting mobile
information. Also, the connection is ‘always on’ which
means there is no need to wait for dialling up. You only
have to pay for the data you send or receive, not how
long you’re connected.
* If you have problems getting connected, please
phone Vodafone Customer Support.
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Your phone is already setup to Vodafone site for WAP/
MMS Settings.
Viewing the WAP Browser
1. Press E during stand-by.
To Exit the WAP Browser
1. Press F to exit the browser.
(M 2)
80 Vodafone live!
Navigating a WAP Page
• :
Move the highlights around in the screen.
• : Used to execute the option displayed in
the lower centre of the screen.
• A: Launch browser option menu.
• C: Used to select an action displayed in the
lower right corner of the screen.
• Q (press and hold):
Used to start the Go to URL.
• G to O (press and hold):
Used to start the Bookmark (WAP).
• F: Exit (short press)
Turn off the phone. (press and hold)
Browser Menu
When you have started browsing, you can reach
browsing options by pressing
A
[Options].
The Browser menu contains the following:
• Select:
Select the link you wish to see. (“Select” is
displayed only when the link is highlighted.)
•Home:
Go to the homepage you set in the WAP Settings.
• Add bookmark:
Add the site you are currently browsing to your list
of bookmarks.
• View bookmarks:
See your list of bookmarks.
• Save items:
Save images or sounds or video clips to Saved
Pictures, Saved Sounds or Saved Video Clips.
•Go to URL:
Input the URL of the site you wish to go to.
• History:
See your history list.
Vodafone live! 81
•Forward:
Move to the next URL in the history list.
• Reload page:
Refresh the contents of the WAP page.
• Advanced
•Show URL:
Display the URL of the site you are currently
browsing.
• Save page:
Save the page you are currently browsing to
your list of Snap Shots.
• Snapshots:
See your list of Snap Shots.
• Alert inbox:
See your list of WAP push messages. You can
receive push messages via WAP Services.
This means that a service provider sends WAP
content to your phone, without any set up.
• Settings:
Includes “Downloads”, etc.
• Security:
Set the security.
• Clear...:
Clear History, cache, etc.
• Restart browser:
Restart the browser.
Bookmarks
To Add a Bookmark
1. Press A [Options] when you are browsing to
display the Options menu.
2. Press or to highlight “Add bookmark”, then
press or
A
[Select] to select.
3. Press to save.
To Access Bookmarked Pages
1. Press A [Options] when you are browsing to
display the Options menu.
2. Press or to highlight “View bookmarks”,
then press or A [Select] to select.
3. Press or to highlight a bookmark page you
wish to access, then press to select.
82 Vodafone live!
To Edit Bookmarks
1. Press A [Options] when you are browsing to
display the Options menu.
2. Press or to highlight “View bookmarks”,
then press or A [Select] to select.
3. Press or to highlight “More…”, then press
to select.
4. Press or to highlight a bookmark page you
wish to edit, then press A [Options] to display the
Options menu.
5. Press or to highlight “Details”, then press
or
A
[Select] to select.
6. Edit the title, then press .
7. Edit the URL, then press .
8. Press or to highlight “Save”, then press
to save.
To Delete Bookmarks
1. Press A [Options] when you are browsing to
display the Options menu.
2. Press or to highlight “View bookmarks”,
then press or A [Select] to select.
3. Press or to highlight “More…”, then press
to select.
4. Press or to highlight a bookmark page you
wish to delete, then press A [Options] to display the
Options menu.
5. Press or to highlight “Delete”, then press
or
A
[Select] to select.
6. Press A [Options] to display the Options menu,
then press or to highlight “OK”, then press
or A [Select] to delete.
My Stuff 83
My Stuff
My Stuff contains several types of picture, sound and
video clip data along with applications which can be
controlled collectively. Also included in My Stuff are
frequently used text message phrases and accessed
WAP pages (addresses) which you can use.
Games & More
Along with the preloaded application, downloaded
applications are stored in Applications.
Note
• The phone can store approximately 2 Mbytes of data
across Applications, Saved Pictures, Saved Sounds
and Saved Video Clips. Applications can store up to
50 applications.
Using Applications
Various kinds of Vodafone specific applications can be
used in this phone.
To use applications, download the applications via the
mobile Internet.
Some applications offer the ability to connect to a
network either within a game or network based
application.
Note
• Applications may be both localised (no connectivity)
and network based (using the mobile Internet to
update information/play games). The network may
charge you more for using network-based
applications. Please contact your service provider
for more information.
Downloading Applications
Confirmation Screen
Before downloading the application you are asked to
confirm what you are about to receive.
After checking the information on the confirmation
screen, the application can be downloaded.
Note
• User authentication may be required before
downloading the application on some information
screens.
(M 6)
(M 6-1)
84 My Stuff
Download More
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Games & More”, then
press to select.
4. Press or to highlight “Download More”,
then press to select.
The application download site is displayed.
5. Press or to highlight the application you
wish to download.
After a WAP browser is displayed variously, the
confirmation screen will appear after a whilst.
6. Press A [Options] to display the Options menu.
7. Press or to highlight “Get”, then press
to start.
Downloading starts.
8. Press A [OK] even if it carries out complete.
Executing Applications
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Games & More”, then
press to select.
4. Press or to highlight “Applications”, then
press to select.
The list of Applications is displayed.
Downloaded applications are sequentially
displayed from the latest one.
5. Press or to highlight the title of the
application you wish to execute, then press to
select.
The selected application is executed.
When using network connection type applications,
connection to the network can be selected.
(M 6-1-2)
(M 6-1-1)
My Stuff 85
To End the Application
1. Press F.
2. Press or to highlight “End”, then press
to select.
To Suspend the Application
1. Press F.
2. Press or to highlight “Suspend”, then press
to select.
To resume the application, perform steps 1 to 4 in
“Executing Applications” on page 84 and highlight
“Resume”, then press .
Checking the Application Information
1. Perform steps 1 to 4 in “Executing Applications” on
page 84.
2. Press or to highlight the application you
wish to check, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Application Details”,
then press or A [Select] to select.
The detailed information screen is displayed.
4. Press or to scroll through the screen.
5. When you have finished, press C [Back] twice.
The screen returns to the list.
Deleting Applications
1. Perform steps 1 to 4 in “Executing Applications” on
page 84.
2. Press or to highlight the application you
wish to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press A [Yes].
The selected application is deleted.
To cancel deletion, press C [No] in step 4.
Note
• You cannot delete preloaded applications.
86 My Stuff
Pictures
Pictures that are taken by a digital camera or images
that are downloaded from mobile Internet sites can be
managed.
: Images in PNG format
: Pictures in JPEG format
: e-Animation file (NEVA)
: Images in GIF format
: Images in BMP format
: Images in WBMP format
: Images in WPNG format
Using Images as Wallpaper
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Pictures”, then press
to select.
4. Press or to highlight “Saved Pictures”, then
press to select.
The list of Saved Pictures is displayed.
5. Press or to highlight the file name you wish
to use as wallpaper, then press A [Options].
The Options menu is displayed.
6. Press or to highlight “Wallpaper”, then
press or
A
[Select] to select.
7. Press or to highlight “Main Display” or
“External Display”, then press to select.
The selected picture is displayed.
8. Press , , or to specify the area you
wish to display, then press .
Saving to Contacts List
1.
Perform steps 1 to 4 in “Using Images as Wallpaper”.
2. Press or to highlight the file name you wish
to add to Contacts List, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Save to Contacts”,
then press or A [Select] to select.
When you overwrite existing Contacts List data
4. Press or to highlight “Existing Contact”,
then press to select.
If the picture size exceeds 240 dots [W] × 320 dots
[H], press , , or to specify the area
you wish to display, then press .
5. Press or to highlight the data you wish to
save to, then press to select.
(M 6-2)
My Stuff 87
When you save new Contacts List data
4 Press or to highlight “New Contact”, then
press to select.
If the picture size exceeds 240 dots [W] × 320 dots
[H], press , , or to specify the area
you wish to display, then press .
For details on entering a name, see “Creating a New
Entry” on page 36.
Editing Pictures
To Retouch Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to retouch, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Edit Picture”, then
press or
A
[Select] to select.
4. Press or to highlight “Retouch”, then press
to select.
5. Press or to highlight the retouching option
you wish to use, then press to select.
The selected option is confirmed on the display.
6. Press .
Note
• The size of pictures that can be retouched is 52 × 52
pixels minimum and 240 dots [W] × 320 dots [H] or
320 dots [W] × 240 dots [H] maximum.
88 My Stuff
To Add a Frame to Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to add frame to, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Edit Picture”, then
press or
A
[Select] to select.
4. Press or to highlight “Add Frame”, then
press to select.
5. Press or to highlight the frame pattern you
wish to use, then press to select.
The selected frame is confirmed on the display.
6. Press .
Note
• The size of pictures that you can add a frame to is 240
dots [W] × 320 dots [H] or 320 dots [W] × 240 dots
[H] maximum.
To Add Stamps to Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to add stamp to, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Edit Picture”, then
press or
A
[Select] to select.
4. Press or to highlight “Add Stamps”, then
press to select.
5. Press
A
[Stamps], then press or to highlight
the stamp pattern you wish to use, then press to
select.
6. Press , , or to move the cursor to the
point you wish to add a stamp.
7. Press to add the stamp.
To add more stamps, repeat steps 5 to 7.
8. Press C [End], then press A [Yes].
To cancel, press C [No] in step 8.
Note
• The size of pictures that you can add stamps to is 24
× 24 pixels minimum and 240 dots [W] × 320 dots
[H] or 320 dots [W] × 240 dots [H] maximum.
My Stuff 89
To Rotate Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to rotate, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Edit Picture”, then
press or
A
[Select] to select.
4. Press or to highlight “Rotate”, then press
to select.
The picture is rotated 90º anticlockwise.
Press A [Rotate] to rotate 90º anticlockwise.
5. Press .
Note
• The size of pictures that you can rotate is 240 dots
[W] × 320 dots [H] or 320 dots [W] × 240 dots [H]
maximum.
Downloading Picture File
1. Perform steps 1 to 3 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight “Download More”,
then press to select.
The picture file download site is displayed.
Viewing Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to view, then press to select.
The selected picture is displayed.
3. Once you have viewed the picture, press C [Back]
to return to the list.
Changing the File Name
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to change, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Rename”, then press
or
A
[Select] to select.
(M 6-2-2)
90 My Stuff
4. Enter a new file name.
To correct the last character, press C [Clear]
briefly.
Press and hold C [Clear] to clear all characters.
5. Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
Adjusting the Size of the Picture
The pictures that are registered in Saved Pictures can be
adjusted for use as main or external displays as well as
incoming call, alarm or power on/off displays.
When the picture size is modified, the data size is
updated.
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to adjust, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Adjust Size”, then
press or
A
[Select] to select.
4. Press or to highlight “Main Display”,
“External Display”, “Power On/Off”, “Incoming”
or “Alarm”, then press to select.
The selected picture is displayed.
5. Press , , or to specify the area you
wish to display, then press .
6. Press to save.
To cancel registration, press C [Back] in step 6.
Note
• “Adjust Size” may not be available depending on the
original picture and copyright issued.
My Stuff 91
Sending Messages
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Pictures”, then press
to select.
4. Press or to highlight “Saved Pictures”, then
press to select.
The list of Saved Pictures is displayed.
5. Press or to highlight the file name you wish
to send, then press A [Options].
The Options menu is displayed.
6. Press or to highlight “Send Message”, then
press or
A
[Select] to select.
7. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59.
Note
• Pictures with a red icon cannot be sent attached to a
message.
Deleting Pictures
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press or to highlight “One Picture” or “All
Pictures”, then press to select.
5. Press A [Yes].
To cancel deletion, Press C [No] in step 5.
92 My Stuff
Checking the Picture Information
1. Perform steps 1 to 4 in “Using Images as
Wallpaper” on page 86.
2. Press or to highlight the file name you wish
to check, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Picture Details”, then
press or
A
[Select] to select.
The detailed information screen is displayed.
4. Press or to scroll through the screen.
5. When you have finished, press C [Back].
Sounds
The ringtones created using the Melody Editor and the
AMR data recorded by Voice Memo is managed in
Saved Sounds. The default ringtones are not contained
within Saved Sounds.
: Sound file in SMAF format
: Original ringtone (composed in Melody Editor)
: Sound file in Standard MIDI format
: Sound file in i Melody format
: Sound file in WAVE format
: Sound file in AMR format
Note
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
Downloading Sound Files
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Sounds”, then press
to select.
4. Press or to highlight “Download More”,
then press to select.
The sound file download site is displayed.
(M 6-3)
(M 6-3-2)
My Stuff 93
Playing Back Sounds
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Sounds”, then press
to select.
4. Press or to highlight “Saved Sounds”, then
press to select.
The Saved Sounds is displayed.
5. Press or to highlight the sound you wish to
play back, then press to select.
The selected sound is played.
To stop playing, press .
Checking the Information of the Sound Files
1. Perform steps 1 to 4 in “Playing Back Sounds”.
2. Press or to highlight the file name you wish
to check, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Sound Details”, then
press or
A
[Select] to select.
The detailed information screen is displayed.
4. Press or to scroll through the screen.
5. When you have finished, press C [Back].
The screen returns to the list.
Changing the File Name
1. Perform steps 1 to 4 in “Playing Back Sounds”.
2. Press or to highlight the file name you wish
to change, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Rename”, then press
or
A
[Select] to select.
4. Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5. Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
Tip
• When “Edit Data” is displayed in the menu in step 2,
you are able to edit the sound (p. 112). Once you
have completed editing the newly saved file
overwrites the old file. This new file then becomes the
original ringtone.
94 My Stuff
Setting the Tone and Strength
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to edit, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Set Tone” or “Set
Strength”, then press or A [Select] to select.
For full details, see pages 109 to 111.
Note
• If “Set Tone” and “Set Strength” are not displayed
in the menu in step 2, you cannot change these
settings.
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to send, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Send Message”, then
press or
A
[Select] to select.
If you select your original ringtone in step 2, perform
the following, otherwise go to step 5.
4. Press or to highlight the file format
“SMAF”, “MIDI” or “i Melody”, then press to
select.
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data is converted if you
select “i Melody” in step 4.
Deleting Sounds
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press or to highlight “One Sound” or “All
Sounds”, then press to select.
5. press A [Yes].
To cancel deletion, press C [No] in step 5.
My Stuff 95
Video Clips
Video clips that are recorded by a video camera or
video clips that are downloaded from mobile Internet
sites can be managed.
Downloading Video Clip Files
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Video Clips”, then
press to select.
4. Press or to highlight “Download More”,
then press to select.
The video clip file download site is displayed.
Playing Back Video Clip Files
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Video Clips”, then
press to select.
4. Press or to highlight “Saved Video Clips”,
then press to select.
The list of Saved Video Clips is displayed.
5. Press or to highlight the video clip you wish
to play back, then press to select.
6. Press .
The selected video clip is played back.
To pause playback, press .
To resume playback, press again.
To stop playback, press C [Back].
To return to the original size, press A [×1].
(M 6-4)
(M 6-4-2)
96 My Stuff
Checking the Video Clip File Information
1. Perform steps 1 to 4 in “Playing Back Video Clip
Files” on page 95.
2. Press or to highlight the file name you wish
to check, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Video Clip Details”,
then press or A [Select] to select.
The detailed information screen is displayed.
4. Press or to scroll through the screen.
5. When you have finished, press C [Back].
Changing the File Name
1. Perform steps 1 to 4 in “Playing Back Video Clip
Files” on page 95.
2. Press or to highlight the file name you wish
to change, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Rename”, then press
or
A
[Select] to select.
4. Enter a new file name.
To delete the last character, press C [Clear] briefly.
Press and hold C [Clear] to clear all characters.
5. Press .
Note
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, >, | and . (full-stop).
Sending Messages
1. Perform steps 1 to 4 in “Playing Back Video Clip
Files” on page 95.
2. Press or to highlight the file you wish to
send, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Send Message”, then
press or
A
[Select] to select.
4. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59.
My Stuff 97
Deleting Video Clip files
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Video Clips”, then
press to select.
4. Press or to highlight “Saved Video Clips”,
then press to select.
The list of Saved Video Clips is displayed.
5. Press or to highlight the file you wish to
delete, then press A [Options].
The Options menu is displayed.
6. Press or to highlight “Delete”, then press
or
A
[Select] to select.
7. Press or to highlight “One Video Clip” or
“All Video Clips”, then press to select.
8. Press A [Yes].
To cancel deletion, press C [No] in step 8.
Bookmarks
You can store desired (or frequently used) pages
(addresses) in Bookmarks. It can save your time in
accessing WAP pages sites. For further details,
see “Vodafone live!” on page 79.
(M 6-5)
98 My Stuff
Text Templates
You can register up to 20 text templates for use in text
messages and multimedia messages.
You can input messages more easily by registering
frequently used text.
120 characters may be registered in any text template.
Adding Phrases to Text Templates
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Text Templates”, then
press to select.
The list of Text Templates is displayed.
4. Press or to highlight the number you wish to
register, then press to select.
5. Enter the text, then press .
For details on entering characters, see “Entering
Characters” on page 29.
Editing Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to Text
Templates”.
2. Press or to highlight the number you wish to
edit, then press to select.
3. Enter new text.
To correct the last character, press C [Clear]
briefly.
Press and hold C [Clear] to clear all characters.
4. Press .
Viewing Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to Text
Templates”.
2. Press or to highlight the number you wish to
view, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “View”, then press
or A [Select] to select.
The selected text template is displayed.
4. After confirmation, press C [Back] to return to the
template list.
(M 6-6)
My Stuff 99
Deleting Text Templates
1. Perform steps 1 to 3 in “Adding Phrases to Text
Templates” on page 98.
2. Press or to highlight the text template you
wish to delete, then press A [Options].
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press A [Yes].
The selected text template is deleted.
To cancel deletion, press C [No] in step 4.
Memory Status
This function helps you to check the memory status of
My Stuff.
1. Press to display the Main menu.
2. Press , , or to highlight “My Stuff”,
then press to select.
3. Press or to highlight “Memory Status”, then
press to select.
(M 6-7)
100 Fun & Games
Fun & Games
Games & More
Executing Applications
You can execute games and other applications on your
phone. For details about Applications, see page 84.
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Perform steps 3 to 5 in “Executing Applications” on
page 84.
Screensavers
You can download screensaver applications for the
stand-by screen.
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Press or to highlight “Games & More”, then
press to select.
4. Press or to highlight “Screensavers”, then
press to select.
5. Press or to highlight “On/Off”, then press
to select.
6. Press or to highlight “On” to set
screensavers on or “Off” to set screensavers off,
then press to select.
7. If you select “On”, press or to highlight the
desired application, then press to select.
Note
• In the list that appears in step 7, only the available
screensavers can be selected.
Online Setting
You can set whether to connect to the network or not
using the screensaver application.
1. Perform steps 1 to 4 in “Screensavers”.
2. Press or to highlight “Online Setting”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
(M 1)
(M 1-1)
(M 1-1-1)
(M 1-1-2)
Fun & Games 101
Note
• Changes made to the above setting whilst the
application is suspended are made effective by
restarting the application.
• You may not be able to make the above settings
depending on your network.
Resume Time
You can set the time period for the screensaver
application to activate.
1. Perform steps 1 to 4 in “Screensavers” on page 100.
2. Press or to highlight “Resume Time”, then
press to select.
3. Enter the resume time in two digits using the digit
keys, then press .
Download More
You can download applications.
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Perform steps 3 to 7 in “Download More” on
page 84.
Settings
Operation Priority
You can set the priority of incoming calls and alarms
whilst an application is operating.
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Press or to highlight “Games & More”, then
press to select.
4. Press or to highlight “Settings”, then press
to select.
5. Press or to highlight “Calls & Alarms”, then
press to select.
6. Press or to highlight the option you wish to
set, then press to select.
The options available are:
• “Incoming Call”
•“Alarm”
7. Press or to highlight methods, then press
to select.
(M 1-1-3)
(M 1-1-4)
102 Fun & Games
• “Call Priority” or “Alarm Priority”:
The application is suspended automatically, and you
can receive a call, or the alarm will sound. After
finishing the call or the alarm ends, the suspend icon
( ) is displayed letting know there is a suspended
application.
• “Call Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the
first line of the screen whilst the application
continues. If you press D, the application is
suspended, and you can receive a call. After finishing
the call, the suspend icon ( ) is displayed letting
know there is a suspended application.
Sound Volume
You can set the volume of the application such as sound
effect to one of the five levels or silent. When “Ringer
Volume” (p. 125) is set to “Silent”, this setup has
priority.
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
2. Press or to highlight “Sound Volume”,
then press to select.
The current volume level is displayed.
3. Press to increase the volume or press to
decrease the volume, then press to select.
Backlight
You can select the backlight method of the application
from the following three types:
• “On”: Lit whilst the application
is operated.
• “Off”: Unlit whilst the application is
operated even if a key is pressed.
• “Normal Settings”: Works with the main backlight
setting. (p. 138)
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
Fun & Games 103
2. Press or to highlight “Backlight”, then press
to select.
3. Press or to highlight “On/Off”, then press
to select.
4. Press or to highlight “On”, “Off” or
“Normal Settings”, then press to select.
To Set the Blinking Operation
This setting enables the backlight to be controlled by
the application. If set to “Off”, the backlight cannot be
turned on from the application.
1. Perform steps 1 and 2 in “Backlight” on page 102.
2. Press or to highlight “Blink”, then press
to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Vibration
When the vibrator is set in the application, you can
choose whether the operation is enabled or disabled.
When a SMAF file is specified in the application, you
can operate the vibrator set in the SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format)
is a music data format for mobile phones.
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
2. Press or to highlight “Vibration”, then press
to select.
3. Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
When you set “Link to Sound”, the application is
synchronised with the vibrator.
104 Fun & Games
Online Confirmation
You can adjust the display settings of the confirmation
screen of the application on application startup.
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
2. Press or to highlight “Online
Confirmation”, then press to select.
3. Press or to highlight “On”, then press to
select.
To cancel confirmation, highlight “Off”, then press
to select.
Reset
To Reset All Items in Settings Menu
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
2. Press or to highlight “Reset”, then press
to select.
3. Enter your handset code, then press .
The default handset code is “0000”. For details on
changing the handset code, see “To Change Handset
Code” on page 161.
If you enter a wrong handset code, the screen will
return to step 4 in “Operation Priority” on page 101.
4. Press or to highlight “Settings Reset”, then
press to select.
5. Press A [Yes].
All items in Settings menu and screensaver settings
are reset.
To cancel resetting, press C [No] in step 5.
Fun & Games 105
To Clear All Applications
All applications stored in Applications are cleared. The
preloaded application cannot be deleted.
1. Perform steps 1 to 4 in “Operation Priority” on
page 101.
2. Press or to highlight “Reset”, then press
to select.
3. Enter your handset code, then press .
If you enter a wrong handset code, the screen will
return to step 4 in “Operation Priority” on page 101.
4. Press or to highlight “All Clear”, then press
to select.
5. Press A [Yes].
All applications are cleared.
To cancel clearing, press C [No] in step 5.
Download More (M 1-1-3)
See “Download More” on page 84 for instructions.
Java™ Information (M 1-1-5)
The information about the license belonging to Java™
can be displayed.
Melody Editor
You can create an original ringtone, or you can send a
melody attached to a multimedia message.
You can input up to 190 tones × 16 voices, or 380 tones
× 8 voices per melody.
The original ringtone is registered in Saved Sounds.
Creating Your Original Ringtone
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Press or to highlight “Melody Editor”,
then press to select.
4. Press or to highlight “Create New”, then
press to select.
5. Enter the title.
Up to 24 characters can be entered.
For details on entering characters, see “Entering
Characters” on page 29.
6. Press .
(M 1-2)
(M 1-2-1)
106 Fun & Games
7. Press or to highlight a tempo, then press
to select.
The music tempo is described below.
• “Allegro (Fast)”: 150
• “Moderato (Normal)”: 125
• “Andante (Slow)”: 107
• “Adagio (Very Slow)”: 94
Tempo is defined by the number of crotchets ( )
played per minute.
8. Press or to highlight “8 Chords” or “16
Chords”, then press to select.
9. Press the digit keys to specify the musical scale and
rest.
For details on specifying the sound level and rest,
see “To Specify the Musical Scale and Rest” on
page 107.
10.Press P or R to specify the types of musical
notes or rest.
For details on specifying the musical notes and rest,
“To Specify the Types of Notes and Rests” on
page 108.
11.Press after inputting one note.
Input the next note after the cursor moves to the
right.
12.Repeat steps 9 to 11 to input notes.
When you press during input, the melody that
you have entered is played back.
When you press A [Options] and select “Play
before Cursor” whilst entering notes, the melody,
that is displayed on the screen, is played back up to
the cursor position.
When you press A [Options] and select “Select
Chord”, you can select another chord. Repeat steps
9 to 11 to input notes for the new chord.
13.When you finish inputting, press A [Options] to
display the Options menu.
14.Press or to highlight “Save”, then press
or A [Select] to select.
15.Press or to highlight “Save to My Stuff”,
then press to select.
Your original ringtone is registered in Saved
Sounds.
Fun & Games 107
Note
• If the capacity or memory in Saved Sounds becomes
insufficient, the message, “Maximum capacity : 250
Not registered.” or “Not registered. Memory full.” is
displayed. The display returns to the screen of step
15. Try again after deleting unnecessary data (p. 94).
To Specify the Musical Scale and Rest
Using the keys shown below, specify the musical scale
and rest.
When you press the key shown above once, a crotchet
is specified in the middle scale (no mark).
When you press the same key repeatedly, the note will
shift cycle through the available octave ranges.
When you press or whilst a note is selected, the
note will move one semitone higher or lower.
When entering rest: Crotchet rest is entered.
Do Re Mi Fa Sol La Ti Rest
GHIJKLMQ
LLL
L
108 Fun & Games
To Specify the Types of Notes and Rests
Specify notes and rests by pressing P or R
repeatedly.
When you make a dotted note or a triplet, press O
after selecting the target note.
Note
• You cannot make a dotted semiquaver (semiquaver
rest) or a dotted semibreve (semibreve rest).
• Three continuous notes are required for a triplet.
To specify a tie, press N after selecting the target
notes.
An underscore (_) is displayed next to the note, and the
note is tied with the next one.
To enter the next note, press and move the cursor to
the right. Then, repeat the operation on the previous
page.
If the cursor is positioned next to a note, you can repeat
the note immediately left of the cursor when or
is pressed.
( )
( )
( )
( )
( )
Crotchet (Crotchet rest)
Quaver (Quaver rest)
Semiquaver (Semiquaver rest)
Semibreve (Semibreve rest)
Minim (Minim rest)
P
P
P
P
P
Fun & Games 109
To Set the Tone
The phone can play notes using different instruments.
1. Perform steps 1 to 13 in “Creating Your Original
Ringtone” on page 105.
2. Press or to highlight “Set Tone”, then press
to select.
3. Press or to highlight a category of the tone.
4. Press or to highlight a tone.
When you press A [Options] and select “Play
Current Chord”, the melody entered is played back
in the selected tone.
When you press A [Options] and select “Confirm
Tones”, the syllable names are played back in the
selected tone.
5. Press .
Now you can create a melody.
You can select from the following 128 tones.
Category Tone Category Tone
Pianos
Piano
Bright Piano
E. Grand Piano
Honky-tonk
Electric Piano 1
Electric Piano 2
Harpsichord
Clavi
Chimes
Celesta
Glockenspiel
Music Box
Vibraphone
Marimba
Xylophone
Tubular Bells
Dulcimer
Organs
Drawbar Organ
Percussive Organ
Rock Organ
Church Organ
Reed Organ
Accordion
Harmonica
Tango Accordion
Guitars
Nylon Guitar
Steel Guitar
Jazz Guitar
Clean Guitar
Muted Guitar
Overdriven Guitar
Distortion Guitar
Guitar Harmonics
Basses
Acoustic Bass
Finger Bass
Pick Bass
Fretless Bass
Slap Bass 1
Slap Bass 2
Synth Bass 1
Synth Bass 2
Strings 1
Violin
Viola
Cello
Contrabass
Tremolo Strings
Pizzicato Strings
Harp
Timpani
110 Fun & Games
Strings 2
String Ensemble 1
String Ensemble 2
Synth Strings 1
Synth Strings 2
Choir Aahs
Voice Oohs
Synth Voice
Orchestra Hit
Brasses
Trumpet
Trombone
Tuba
Muted Trumpet
French Horn
Brass Section
Synth Brass 1
Synth Brass 2
Reeds
Soprano Sax
Alto Sax
Tenor Sax
Baritone Sax
Oboe
English Horn
Bassoon
Clarinet
Flutes/
Pipes
Piccolo
Flute
Recorder
Pan Flute
Blown Bottle
Shakuhachi
Whistle
Ocarina
Synth
Leads
Square Lead
Sawtooth Lead
Calliope Lead
Chiff Lead
Charang Lead
Voice Lead
Fifth Lead
Bass & Lead
Synth
Pads
New Age Pad
Warm Pad
Polysynth Pad
Choir Pad
Bowed Pad
Metallic Pad
Halo Pad
Sweep Pad
Category Tone Category Tone
Synth
Effects
Rain
Soundtrack
Crystal
Atmosphere
Brightness
Goblins
Echoes
Science Fiction
Ethnics
Sitar
Banjo
Shamisen
Koto
Kalimba
Bagpipe
Fiddle
Shanai
Percus-
sions
Tinkle Bell
Agogo
Steel Drums
Woodblock
Taiko Drums
Melodic Tom
Synth Drum
Reverse Cymbal
Effects
Gtr. Fret Noise
Breath Noise
Seashore
Bird Tweet
Telephone Ring
Helicopter
Applause
Gunshot
Category Tone Category Tone
Fun & Games 111
To Set the Strength of the Original Ringtone
The strength of the original ringtone can be set in 3
levels for each melody.
When you purchase this phone, the strength of the
original ringtone is set to “Loud”.
1. Perform steps 1 to 13 in “Creating Your Original
Ringtone” on page 105.
2. Press or to highlight “Set Strength”, then
press .
3. Press or to highlight a strength of the tone.
When A [Play] is pressed, the original ringtone
entered is played back in the selected strength of the
tone.
4. Press .
Now you can create an original ringtone.
Deleting an Original Ringtone
1. Perform steps 1 to 4 in “Playing Back Sounds” on
page 93.
2. Press or to highlight the file name you wish
to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press or to highlight “One Sound” or “All
Sounds”, then press to select.
5. press A [Yes].
To cancel deletion, press C [No] in step 5.
112 Fun & Games
Editing Original Ringtones
1. Press to display the Main menu.
2. Press , , or to highlight “Fun &
Games”, then press to select.
3. Press or to highlight “Melody Editor”,
then press to select.
4. Press or to highlight “Existing Melodies”,
then press to select.
5. Press or to highlight an original ringtone
you wish to edit, then press A [Options].
The Options menu is displayed.
6. Press or to highlight “Edit Data”, then press
or
A
[Select] to select.
7. Edit the title, then press .
8. Press or to highlight a tempo, then press
to select.
9. Press or to highlight the number of voices,
then press to select.
10.Press or to highlight a note you wish to
change, then edit notes.
When you add notes, enter the note correctly on the
cursor.
To delete a note, press C [Clear] briefly.
Press and hold C [Clear] to clear all tones.
11.When you finish editing, press A [Options] to
display the Options menu.
12.Press or to highlight “Save”, then press
or A [Select] to select.
13.Press or to highlight “Save to My Stuff”,
then press to select.
14.Press or to highlight “Overwrite”, then
press to select.
The original ringtone is changed.
If you select “New”, the melody before the
correction is not modified. The original ringtone is
registered as a new original ringtone.
Fun & Games 113
Note
• When the number of voices is modified in step 9, the
confirmation screen may be displayed. When you
press A [Yes], a section of the melody may be
deleted.
• When you are going to add notes in step 10, you
cannot add any notes if you have already entered 380
notes (for 8 voices melodies) or 190 notes (for 16
voices melodies).
Tip
• To delete the continuous melody, press A [Options]
and then press or A [Select] after selecting
“Delete after Cursor” or “Delete before Cursor”.
You can delete the melody after the cursor or before
the cursor.
Copying and Pasting Notes
You can copy and move a part of the melody to another
position.
Only original ringtones or editable melodies can be
copied or moved.
1. Perform steps 1 to 9 in “Editing Original Ringtones”
on page 112.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Copy” or “Cut”, then
press or
A
[Select] to select.
4. Press or to move the cursor to the first note
to be copied or to be cut, then press .
5. Press or to move the cursor to the last note
to highlight the area, then press .
The highlighted area is saved temporarily in the
memory. If you select “Cut” in step 3, the
highlighted area is cut.
6. Press A [Options] to display the Options menu.
7. Press or to highlight “Paste”, then press
or A [Select] to select.
8. Press or to move the cursor to the point you
wish to paste the notes, then press .
Saved notes are pasted.
114 Applications
Applications
SIM Application
You can refer to the information on the SIM. Contact
your service provider for further details.
Calendar
The Calendar function helps you organise and manage
your busy schedule. You can view the stored schedule
on a monthly basis.
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then press to select.
3. Press or to highlight “Calendar”, then press
to select.
The current month is displayed and the current date
is highlighted.
4. Press , , or to highlight the day for the
schedule, then press to select.
5. Press or to highlight the note number, then
press to select.
6. Enter the schedule content, then press .
Up to 3 schedule items can be stored.
For details on entering characters, see “Entering
Characters” on page 29.
If you wish to add another item, repeat steps 5 and 6.
7. When you have finished entering, press C [Back].
The screen returns to the calendar. Dates with
scheduled tasks/meetings are underlined.
Note
• The calendar can be displayed for dates from
January 2000 through to December 2099.
To Find a Particular Date
You can move the view to a specified date in the
calendar.
1. Press A [Options] to display the Options menu.
2. Press or to highlight “Go to Date”, then
press or
A
[Select] to select.
3. Enter the date of the calendar to be displayed, then
press .
The specified date is displayed.
(M 3)
(M 3-1)
(M 3-2)
Applications 115
To Change to Weekly Format
You can change the Calendar to weekly format.
1. Perform steps 1 to 3 in “Calendar” on page 114.
The current month is displayed and the current date
is highlighted.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Weekly Format”, then
press or
A
[Select] to select.
4. Press or to highlight “Monday-Sunday” to
display weekly format from Monday or “Sunday-
Saturday” to display weekly format from Sunday,
then press to select.
Deleting Schedules
To Delete Schedule Items
1. Perform steps 1 to 3 in “Calendar” on page 114.
2. Press , , or to highlight the day, then
press to select.
3. Press or to highlight the item you wish to
delete, then press A [Options].
The Options menu is displayed.
4. Press or to highlight “Delete”, then press
or
A
[Select] to select.
5. Press or to highlight “1 data”, then press
to select.
6. Press A [Yes].
To cancel deleting, press C [No] in step 6.
To Delete All Scheduled Tasks/Meetings for a
Specific Day
1. Perform steps 1 to 3 in “Calendar” on page 114.
2. Press , , or to highlight the day you
wish to delete, then press A [Options].
The Options menu is displayed.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press or to highlight “1 day” to delete all
contents for a day, then press to select.
5. Press A [Yes].
To cancel deletion, press C [No] in step 5.
116 Applications
To Delete All Scheduled Entries
1. Perform steps 1 to 3 in “Calendar” on page 114.
2. Press A [Options] to display the Options menu.
3. Press or to highlight “Delete” to delete all
scheduled entries, then press or A [Select] to
select.
4. Press or to highlight “All Data” to delete all
scheduled entries, then press to select.
5. Press A [Yes].
To cancel deletion, press C [No] in step 5.
Alarm
Setting the Alarm
The alarm function allows you to be alerted at a
specified time.
Note that the alarm may not function correctly if the
clock has not been set.
The alarm functions only if the phone is switched on.
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then press to select.
3. Press or to highlight “Alarm”, then press
to select.
4. Press or to highlight “List Alarms”, then
press to select.
5. Press or to highlight the desired alarm
number, then press to select.
Up to 5 alarm times can be specified.
6. Press or to highlight “Set Time”, then press
to select.
7. Enter the alarm time using the digit keys, then press
.
When you enter the alarm time in the 12-hour clock
format, press P to switch between am and pm.
(M 3-3)
(M 3-3-1)
Applications 117
8. Press or to highlight “Repeat Daily”, then
press to select.
9. Press or to highlight “On” or “Off”, then
press to select.
10.Press or to highlight “Alarm Status”, then
press to select.
11.Press or to highlight “On”, then press to
select.
12.Press C [Save].
To Change the Type of Alarm Tone
1. Perform steps 1 to 5 in “Setting the Alarm” on
page 116.
2. Press or to highlight “Alarm Tone”, then
press to select.
3. Press or to highlight “Tone”, then press
to select.
4. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
5. Press or to highlight the alarm tone.
If you wish to hear the demo play, press A [Play].
To stop playing, press A [Stop].
6. When selection is complete, press .
118 Applications
To Change the Vibration of the Alarm
1. Perform steps 1 to 5 in “Setting the Alarm” on
page 116.
2. Press or to highlight “Alarm Tone”, then
press to select.
3. Press or to highlight “Vibration”, then press
to select.
4. Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
To Change the Duration of the Alarm
1. Perform steps 1 to 5 in “Setting the Alarm” on
page 116.
2. Press or to highlight “Alarm Tone”, then
press to select.
3. Press or to highlight “Duration”, then press
to select.
The current duration is displayed.
4. Enter the length of the duration in 2 digits (02 to 59
seconds) using the digit keys, then press .
Changing Alarm Settings
1. Perform steps 1 to 4 in “Setting the Alarm” on
page 116.
2. Press or to highlight the number you wish to
change, then press to select.
3. Change Alarm settings.
For details on changing Alarm settings, see “Setting
the Alarm” on page 116.
Disabling the Alarm Function
1. Perform steps 1 to 5 in “Setting the Alarm” on
page 116.
2. Press or to highlight “Alarm Status”, then
press to select.
3. Press or to highlight “Off”, then press to
select.
4. Press C [Save].
Applications 119
Resetting an Alarm Setting
1. Perform steps 1 to 4 in “Setting the Alarm” on
page 116.
2. Press or to highlight the number you wish to
reset, then press to select.
3. Press or to highlight “Reset Alarm”, then
press to select.
4. Press A [Yes].
To cancel resetting, press C [No] in step 4.
Resetting All Alarm Settings
1. Perform steps 1 to 3 in “Setting the Alarm” on
page 116.
2. Press or to highlight “Clear All”, then press
to select.
3. Press A [Yes].
To cancel resetting, press C [No] in step 3.
Calculator
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then press to select.
3. Press or to highlight “Calculator”, then
press to select.
4. Press or to highlight “Calculator”, then
press to select.
The calculator is displayed on the display.
5. Key operations for calculation are as follows.
(M 3-4)
120 Applications
To enter a decimal point, press R.
To clear the entered number or operand, press C
[Clear].
To do the calculations, press .
6. If you wish to start a new calculation, press C
[Clear].
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
To Set a Currency Conversion Rate
1. Perform steps 1 to 3 in “Calculator” on page 119.
2. Press or to highlight “Exchange Rate”, then
press to select.
3. Press or to highlight “Foreign Domestic”
or “Domestic Foreign”, then press to select.
4. Enter the currency conversion rate, then press .
To delete all digits, press C [Clear].
To Convert a Value
1. Perform steps 1 to 4 in “Calculator” on page 119.
2. Enter the value to be converted, then press A
[Options].
The Options menu is displayed.
3. Press or to highlight “In Domestic” or “In
Foreign”, then press or A [Select] to select.
The result is displayed.
If you select “Exchange Rate” in step 3, you can set
a currency conversion rate.
Note
• You cannot perform step 2 when an arithmetic
symbol (+, –, × or ÷ ) is displayed.
Applications 121
Voice Memo
This allows you to record a voice message of up to 10
seconds, which can be used to remind you of schedule
entries or be sent within a multimedia message. The
recorded voice memo is registered in Saved Sounds.
To Record a Voice Memo
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then press to select.
3. Press or to highlight “Voice Memo”, then
press to select.
4. Press to start recording.
To stop recording before the recording time is over,
press .
5. Press or to highlight “Save” to save the
voice memo, then press to select.
Tip
• You can also record a voice memo by pressing
during stand-by, then press R whilst the Main menu
is displayed, instead of steps 1 to 3.
• If you wish to record a voice memo again, press C
[Cancel] in step 5. The screen will return to step 4.
To Play Back the Saved Voice Memo
1. Perform steps 1 to 4 in “To Record a Voice Memo”.
2. Press or to highlight “Playback”, then press
to select.
3. Press .
The recorded voice memo is played back.
To stop playback, press .
(M 3-5)
122 Applications
PC Link
You can connect your phone to a PC using either the
infrared link or the cable connection. PC software is
necessary for a PC connection. For details on how to get
the link software and the functions, see page 167.
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then to select.
3. Press or to highlight “PC Link”, then press
to select.
4. Press or to highlight “Infrared” for infrared
link or “Data Cable” for cable connection, then
press to select.
Phone Help
You can view the help list and use it to guide you in the
phone’s functions.
1. Press to display the Main menu.
2. Press , , or to highlight
“Applications”, then press to select.
3. Press or to highlight “Phone Help”, then
press to select.
The help list is displayed.
4. Press or to highlight the desired function.
5. When you have finished, press C [Back].
(M 3-6) (M 3-7)
Profiles 123
Profiles
You can easily alter the phone tone (e.g. the ringer
volume, keypad tones, etc.) according to your
environment.
Tone sound and vibration set can be customised for
each profile.
There are 5 profiles including one user definable
profile:
•Normal
• Meeting
• Activity
•Car
• Silent
Activating a Profile
1. Press to display the Main menu.
2. Press , , or to highlight “Profiles”,
then press to select.
The Profiles screen is displayed.
3. Press or to highlight the profile you wish to
activate, then press to select.
Note
• When a profile is set, the icon which corresponds to
the profile name is displayed in the stand-by screen:
Normal: Is the default setup. (not displayed
in the stand-by screen)
Meeting: For use when discretion is needed.
Activity: For use in busy environments.
Car: For use in the car. (connected to a
hands free car kit)
Silent: For use when silence is needed.
All sounds are muted and you are
alerted to calls with the vibrator.
Tip
• You can press and hold R for approximately 2
seconds instead of steps 1 and 2 to display the
Profiles screen during stand-by.
(M 7)
124 Profiles
Customising Profiles
1. Press to display the Main menu.
2. Press , , or to highlight “Profiles”,
then press to select.
3. Press or to highlight the profile you wish to
customise, then press A [Options].
4. Press or to highlight “Personalise”, then
press or
A
[Select] to select.
5. Press or to highlight the setting you wish to
customise, then press to select.
6. Change the desired setting.
For details about settings, see pages 125 to 129.
7. When you have finished, press A [Save] to save the
modifications.
Resetting Profile Settings
1. Perform steps 1 and 2 in “Customising Profiles”.
2. Press or to highlight the profile you wish to
reset, then press A [Options].
3. Press or to highlight “Set to Default”, then
press or
A
[Select] to select.
4. Enter your handset code, then press .
5. Press A [Yes].
To cancel the resetting, press C [No] in step 5.
Note
• If you enter a wrong handset code in step 4, the
screen returns to step 3.
Profiles 125
Ringer Volume
You can adjust the ringer volume to one of 6 levels or a
step tone.
When it is set to “Silent”, the volume of
applications is
muted.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Ringer Volume”, then
press to select.
The current volume level is displayed.
3. Press to increase the ringer volume or press
to decrease the ringer volume and then press .
To select “Step Tone”, press at level 5.
To select “Silent”, press at level 1.
Assigning Melody
You can select the ringtone from 28 tones including 5
patterns, 13 sound effects and 10 melodies. You can
also select a sound in Saved Sounds as the default
ringtone excluding the AMR/WAVE format.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Assign Melody”, then
press to select.
3. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
4. Press or to highlight the ringtone you wish
to use.
If you wish to hear the demo, press A [Play].
To stop playing, press A [Stop].
5. When selection is complete, press .
Note
• If you delete a ringtone that uses a sound in Saved
Sounds, the default ringtone is set.
126 Profiles
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Vibration”, then press
to select.
3. Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ringtone.
However, this function may not work depending on
the data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” is displayed on the stand-by screen.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Keypad Tones”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press or to highlight “Volume”, then press
to select.
5. Press to increase the volume or press to
decrease the volume, then press .
6. Press or to highlight “Tone”, then press
to select.
7. Press or to highlight either “Preset
Melodies”, “My Sounds” or “Default Tone”, then
press to select.
If you select “Preset Melodies” or “My Sounds” in step
7, perform the following, otherwise go to step 9.
Profiles 127
8. Select the keypad tone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Duration”, then press
to select.
10.Press or to highlight the desired duration,
then press to select.
Warning Tone
This function enables your phone to emit the warning
tone when an error occurs.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Warning Tone”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press or to highlight “Volume”, then press
to select.
5. Press to increase the volume or press to
decrease the volume, then press .
6. Press or to highlight “Tone”, then press
to select.
7. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
8. Select the warning tone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Duration”, then press
to select.
10.Press or to highlight the duration, then press
to select.
128 Profiles
Power On/Off Sound
The phone can be set up to emit a sound when it is
switched on or off. You can define the volume, duration
and the melody to be used for this task.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Power On Sound” or
“Power Off Sound”, then press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
If you select “Off”, the screen returns to step 1.
4. Press or to highlight “Volume”, then press
to select.
5. Press to increase the volume or press to
decrease the volume and then press .
6. Press or to highlight “Sound”, then press
to select.
7. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
8. Select the ringtone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Duration”, then press
to select.
10.Enter the desired duration of the ringtone in 2 digits
(01 to 10 seconds) using the digit keys, then press
.
Message Alert
When receiving messages, special ringtones can be set.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Message Alert”, then
press to select.
3. Press or to highlight “Multimedia”, “Text”
or “WAP”, then press to select.
4. Press or to highlight “Volume”, then press
to select.
5. Press to increase the volume or press to
decrease the volume and then press .
6. Press or to highlight “Sound”, then press
to select.
7. Press or to highlight “Preset Melodies” or
“My Sounds”, then press to select.
Profiles 129
8. Select the ringtone.
For details on selecting a ringtone, see “Assigning
Melody” on page 125.
9. Press or to highlight “Vibration”, then press
to select.
10.Press or to highlight “Enable”, “Disable” or
“Link to Sound”, then press to select.
11.Press or to highlight “Duration”, then press
to select.
12.Enter the duration of ringtone in 2 digits (01 to 15
seconds) using the digit keys, then press .
Low Battery Alert
Adjust the volume of the alarm when the battery
becomes low.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Low Battery Alert”,
then press to select.
3. Press to increase the volume or press to
decrease the volume and then press .
Any Key Answer
You can also answer a call by pressing any key except
F, C [Busy], and . For details, see page 23.
1. Perform steps 1 to 4 in “Customising Profiles” on
page 124.
2. Press or to highlight “Any Key Answer”,
then press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
130 Contacts
Contacts
Call Log
The phone will record the last 10 missed calls, received
calls and dialled numbers.
Viewing Call Log
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Call Log”, then press
to select.
4. Press or to highlight “Missed Calls”,
“Received Calls” or “Dialled Numbers”, then press
to select.
The selected call log list is displayed.
5. Press or to highlight the number you wish to
view.
6. Press .
Call log “1” is the most recent.
When you press , call log “2” is displayed.
If you wish to dial the number, press D.
7. When you have finished, press C [Back] to return
to step 4.
Tip
• You can also confirm call logs by pressing D during
stand-by mode.
• You can switch between histories by pressing or
in step 5 only when you enter by D in stand-by
mode.
Sending Messages
1. Perform steps 1 to 5 in “Viewing Call Log”.
2. Press or to highlight the call log you wish to
send, then press to select.
The selected call record is displayed in detail.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Send Message”, then
press or
A
[Select] to select.
5. Press or to highlight “Multimedia” or
“Text”, then press to select.
6. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 59 or “Creating a New SMS”
on page 70.
(M 8)
(M 8-2)
Contacts 131
Deleting a Call Log
To Delete a Single Call Log
1. Perform steps 1 to 5 in “Viewing Call Log” on
page 130.
2. Press or to highlight the call log you wish to
delete, then press to select.
The selected call log is displayed in detail.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Delete”, then press
or
A
[Select] to select.
5. Press A [Yes].
The selected call log is deleted.
To cancel deletion, press C [No] in step 5.
Call Timers
This function lets you check the duration of your calls.
Checking the Duration of the Last Call
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Call Log”, then press
to select.
4. Press or to highlight “Call Timers”, then
press to select.
5. Press or to highlight “Last Call”, then press
to select.
The duration of the last call is now displayed.
6. When you have finished, press C [Back] to return
to call timers menu.
Checking the Total Call Time
1. Press or to highlight “All Calls”, then press
to select in step 5 in “Checking the Duration of
the Last Call”.
2. When you have finished, press C [Back].
(M 8-2-4)
132 Contacts
Resetting All Call Timers
1. Perform steps 1 to 4 in “Checking the Duration of
the Last Call” on page 131.
2. Press or to highlight “Clear Timers”, then
press to select.
3. Enter your handset code, then press .
4. Press A [Yes].
The Call Timers are reset to zero.
To cancel resetting, press C [No] in step 4.
Call Costs
This function lets you check the charges for your calls.
Some networks do not support Charging Advice. Please
check with your service provider for availability.
Checking the Cost of the Last Call
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Call Log”, then press
to select.
4. Press or to highlight “Call Costs”, then
press to select.
5. Press or to highlight “Last Call”, then press
to select.
The cost of the last call is now displayed.
6. When you have finished, press C [Back] to return
to call costs menu.
(M 8-2-5)
Contacts 133
Checking the Total Call Cost
1. Press or to highlight “All Calls” in step 5 in
“Checking the Cost of the Last Call” on page 132,
then press to select.
2. When you have finished, press C [Back].
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 132.
2. Press or to highlight “Cost Units”, then
press to select.
3. Press or to highlight “Set Units”, then press
to select.
4. Enter your PIN2 code, then press .
5. Enter a cost per unit, then press .
To enter a decimal point, press R.
6. Enter a currency unit (up to 3 characters), then press
.
Checking the Charge Rate
1. Press or to highlight “Read Units”, then
press to select in step 3 in “Setting the Charge
Rate”.
The charge rate is now displayed.
2. When you have finished, press C [Back].
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 132.
2. Press or to highlight “Max Cost”, then press
to select.
3. Press or to highlight “Set Limit”, then press
to select.
4. Enter your PIN2 code, then press .
5. Enter a value, then press .
To enter a decimal point, press R.
134 Contacts
Checking the Charge Limit
1. Press or to highlight “Read Limit”, then
press to select in step 3 in “Setting the Charge
Limit” on page 133.
The value of the charge limit is displayed.
2. When you have finished, press C [Back].
Resetting All Call Costs
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 132.
2. Press or to highlight “Clear Costs”, then
press to select.
3. Enter your PIN2 code, then press .
4. Press A [Yes].
The Call Costs are reset to zero.
To cancel resetting, press C [No] in step 4.
Checking the Residual Credit
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call” on page 132.
2. Press or to highlight “Residual Credit”, then
press to select.
3. When you have finished, press C [Back].
Data Counter
You can confirm the amount of bytes which you used
in the GPRS transmission.
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Call Log”, then press
to select.
4. Press or to highlight “Data Counter”, then
press to select.
5. Press or to highlight “Last Data” or “All
Data”, then press to select.
You can now check the amount of bytes.
6. When you have finished, press C [Back].
Resetting All Data Counter
1. Perform steps 1 to 4 in “Data Counter”.
2. Press or to highlight “Clear Counter”, then
press to select.
3. Press A [Yes].
The Data Counter is reset to zero.
To cancel resetting, press C [No] in step 3.
(M 8-2-6)
Contacts 135
Speed Dial List
You can view and perform other operations for phone
numbers registered in the Speed Dial List.
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “Speed Dial List”, then
press to select.
The names and phone numbers stored in the Speed
Dial List are displayed in order.
Registering the Phone Numbers in the Speed
Dial List
1. Perform steps 1 to 3 in “Speed Dial List”.
2. Press or to highlight the phone number you
wish to register in the Speed Dial List.
3. Press A [Options] to display the Options menu.
4. Press or to highlight “Assign” (or “Re-
assign”), then press or A [Select] to select.
5. Press or to highlight the name you wish to
register in the Speed Dial List, then press .
Tip
• You can select other options in step 4:
“Delete”: Deletes the selected entry.
“Clear All”: Deletes all registered entries.
My Numbers
You can check your own voice, data and fax phone
numbers.
1. Press to display the Main menu.
2. Press , , or to highlight “Contacts”,
then press to select.
3. Press or to highlight “My Numbers”, then
press to select.
4. Press or to highlight the phone number you
wish to check from either “Voice”, “Data” or “Fax”,
then press to select.
Note
• “Data” or “Fax” may not be displayed depending on
the SIM card.
(M 8-3)
(M 8-4)
136 Settings
Settings
Phone Settings
Changing the Language
You can change the language that the phone uses to
display messages.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Phone Settings”, then
press to select.
4. Press or to highlight “Language”, then press
to select.
5. Press or to highlight the desired language,
then press to select.
Tip
• You can also change the input language on the text
entry screen. (p. 30)
Note
• If you select “Automatic” in step 5, the language
preset on the SIM card is selected.
• If the language preset on the SIM card is not
supported, then the default language of the phone is
selected.
Setting the Main Display
You can change the settings of the Main Display.
Wallpaper for the Main Display
For the stand-by screen of the main display an
animation and 3 pictures are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set Built-in Animation or Pictures of the Main
Display
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Phone Settings”, then
press to select.
4. Press or to highlight “Main Display”, then
press to select.
5. Press or to highlight “Wallpaper”, then
press to select.
(M 9)
(M 9-1)
(M 9-1-1)
(M 9-1-2)
Settings 137
6. Press or to highlight “Preset Pictures”, then
press to select.
7. Press or to highlight the desired animation
or picture, then press A [View].
The selected animation or picture is displayed.
8. Press to set.
The selected animation or picture is displayed on
the stand-by screen.
Note
• Even if an animation is selected, the stand-by screen
displays a still picture when you do not operate the
phone for about 30 seconds (Differs according to the
selected data).
Tip
• To cancel the Wallpaper setting, select “Off” in step
6.
To Set My Pictures for the Main Display
1. Perform steps 1 to 5 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “My Pictures”, then
press to select.
The file names of the pictures that are registered in
the Saved Pictures are displayed.
3. Press or to highlight the picture, then press
to select.
The selected picture is displayed.
4. Press , , or to specify the area you
wish to display, then press .
The selected picture is displayed on the stand-by
screen.
Note
• Some pictures cannot be used because of their
picture and data types.
138 Settings
Backlight
You can turn the backlight of the main display on or off
when you press the keypad or the optional cigarette
lighter charger is connected to the phone.
You can change or specify the amount of time the
backlight is on for, which will help conserve battery
life.
To Turn On/Off the Backlight
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Phone Settings”, then
press to select.
4. Press or to highlight “Main Display”, then
press to select.
5. Press or to highlight “Backlight”, then press
to select.
6. Press or to highlight “On/Off”, then press
to select.
7. Press or to highlight “On” to set backlight
on or “Off” to set backlight off, then press to
select.
When you select “On” in step 7:
8. Enter the duration of the backlight using 2 digits,
then press .
To Turn On/Off the Backlight whilst Charging with
the Cigarette Lighter Charger
With this setting On, the phone’s backlight is on when
the cigarette lighter charger is connected. (The
backlight of the external display is on, when the phone
is closed.)
1. Perform steps 1 to 5 in “To Turn On/Off the
Backlight”.
2. Press or to highlight “In Car”, then press
to select.
3. Press or to highlight “On” to set backlight
on or “Off” to set backlight off, then press .
Adjusting the Brightness of the Backlight
You can adjust the brightness of the backlight of the
main display from 4 levels.
1. Perform steps 1 to 4 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “Brightness”, then
press to select.
Settings 139
3. Press (Light) or (Dark) to adjust the
brightness for maximum clarity.
4. Press .
Note
• The brightness of the backlight above does not affect
the brightness of the external display.
Setting the Display Saving
This phone’s screen will automatically turn off after a
given amount of time if the phone is left open. This is
in order to conserve battery life.
You can change the time before the Display Saving will
go into effect from between 2 and 20 minutes.
Tip
• When you purchase this phone, Display Saving is set
to 10 minutes.
1. Perform steps 1 to 4 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “Display Saving”, then
press to select.
3. Enter the time before Display Saving takes effect in
two digits (02 to 20 minutes) using the digit keys,
then press .
Note
• Display Saving does not work whilst you are calling,
using WAP, or using an application.
To Cancel the Display Saving Function
The display saving continues until either a key is
pressed or there is an incoming alert. The first key press
only cancels the Display Saver. You must press another
key in order to input any numerical or text value.
Setting the Greeting Message
You can set the message which will appear when the
phone is turned on.
1. Perform steps 1 to 4 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “Greeting Message”,
then press to select.
3. Press or to highlight “On”, then press to
select.
4. Enter the message, then press .
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 29.
Tip
• To cancel the Greeting Message setting, select “Off”
in step 3.
140 Settings
Assigning the Pictures
Pictures can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
Pictures taken by a digital camera or images
downloaded from a WAP site can be used.
To Set Built-in Pictures
1. Perform steps 1 to 4 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “Assign Pictures”, then
press to select.
3. Press or to highlight the screen to set the
picture, then press to select.
4. Press or to highlight “Animation 1” or
“Animation 2”, then press A [View].
Or press or to highlight “Pattern 1” or
“Pattern 2”, then press A [View] when you select
“Incoming” or “Alarm” in step 3.
The selected animation or picture is displayed.
5. Press to set.
Tip
• To cancel the picture setting, select “Default”, then
press in step 4.
To Set My Pictures
1. Perform steps 1 to 4 in “To Set Built-in Animation
or Pictures of the Main Display” on page 136.
2. Press or to highlight “Assign Pictures”, then
press to select.
3. Press or to highlight the screen to set the
picture, then press to select.
4. Press or to highlight “My Pictures”, then
press to select.
The file name of the pictures that are registered in
the Saved Pictures is displayed.
5. Press or to highlight the picture, then press
to select.
The selected picture is displayed.
6. Press , , or to specify the area you
wish to display, then press .
Note
• Some pictures cannot be used because of their
picture and data types.
Settings 141
Setting the External Display (M9-1-3)
You can change the settings of the external display.
To Turn On/Off the External Display
You can turn the external display on or off when the
phone is closed.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Phone Settings”, then
press to select.
4. Press or to highlight “External Display”,
then press to select.
5. Press or to highlight “LCD On/Off”, then
press to select.
6. Press or to highlight “On” to set external
display on or “Off” to set external display off, then
press to select.
Wallpaper for the External Display
For the stand-by screen of the external display, an
animation and 3 pictures are provided.
Pictures taken with the digital camera or images
downloaded from a WAP site can be used for
wallpapers.
To Set Built-in Animation or Pictures of the
External Display
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Phone Settings”, then
press to select.
4. Press or to highlight “External Display”,
then press to select.
5. Press or to highlight “Wallpaper”, then
press to select.
6. Press or to highlight “Preset Pictures”, then
press to select.
7. Press or to highlight the desired animation
or picture, then press A [View].
The selected animation or picture is displayed.
8. Press to set.
The selected animation or picture is set.
142 Settings
Note
• Even if an animation is selected, the stand-by screen
displays a still picture when you do not operate the
phone for about 2 minutes.
• When an animation is set as the wallpaper of the
external display, the battery consumes large amounts
of power and stand-by time may be shortened. To use
the battery for a long time, set a still picture for
wallpaper for external display or set the wallpaper of
the external display setting off.
Tip
• To cancel the Wallpaper setting, select “Off” in step
6.
To Set My Pictures for the External Display
1. Perform steps 1 to 5 in “To Set Built-in Animation
or Pictures of the External Display” on page 141.
2. Press or to highlight “My Pictures”, then
press to select.
The file names of the pictures that are registered in
Saved Pictures are displayed.
3. Press or to highlight the picture, then press
to select.
The selected picture is displayed.
4. Press , , or to specify the area you
wish to display, then press .
The selected picture is set.
Note
• Some pictures cannot be used because of their
picture and data types.
Settings 143
To Turn On/Off the Backlight of the External
Display
You can turn the backlight of the external display on or
off when the phone is closed.
You can also change or specify the duration of the
external display backlight.
1. Perform steps 1 to 4 in “To Turn On/Off the
External Display” on page 141.
2. Press or to highlight “Backlight”, then press
to select.
3. Press or to highlight “On” to set backlight
on or “Off” to set backlight off, then press to
select.
When you select “On” in step 3:
4. Enter the duration of the backlight using 2 digits,
then press .
To Adjust the LCD Contrast of the External Display
You may sometimes need to adjust the LCD contrast of
the external display to suit certain lighting conditions.
1. Perform steps 1 to 4 in “To Turn On/Off the
External Display” on page 141.
2. Press or to highlight “LCD Contrast”,
then press to select.
3. Press (Low) or (High) to adjust the contrast
for maximum clarity.
LCD contrast can be adjusted to 9 levels.
4. Press .
144 Settings
To Set Incoming Indication
Illustrations can be displayed on the external display
when receiving an incoming call.
1. Perform steps 1 to 4 in “To Turn On/Off the
External Display” on page 141.
2. Press or to highlight “Incoming Indication”,
then press to select.
3. Press or to highlight an illustration from
“Illustration 1” to “Illustration 4”, then press to
select.
Tip
• You can preview a selected illustration by pressing
A
[View].
To Display the Clock on the External Display
You can set the digital/analogue clock to be displayed
on the external display.
1. Perform steps 1 to 4 in “To Turn On/Off the
External Display” on page 141.
2. Press or to highlight “Clock Display”, then
press to select.
3. Press or to highlight “Digital Clock 1” to
“Digital Clock 3” or “Analogue Clock 1” to
“Analogue Clock 3”, then press to select.
Tip
• You can preview a selected clock by pressing A
[View].
• To cancel the clock display, select “Off” in step 3.
• When the wallpaper is set, both the hour and minute
hands of the analogue clock are displayed on the
wallpaper and the digital image is not displayed.
To Display Icons on the External Display
You can set to display icons on the external display.
1. Perform steps 1 to 4 in “To Turn On/Off the
External Display” on page 141.
2. Press or to highlight a clock from “Icon
Display”, then press to select.
3. Press or to highlight “On” to set icon
display on or “Off” to set icon display off, then
press to select.
Settings 145
Phone Setting Reset (M 9-1-4)
The phone settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Changing the Language” on
page 136.
2. Press or to highlight “Set to Default”, then
press to select.
3. Enter your handset code, then press .
4. Press A [Yes].
To cancel resetting, press C [No] in step 4.
Note
• If you enter a wrong handset code in step 3, the
operation is cancelled.
Call Settings
Set various types of functions and services.
Call Waiting
If you wish to be able to receive another incoming call
whilst you have a call in progress, you must activate the
Call Waiting service.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Call Settings”, then
press to select.
4. Press or to highlight “Call Waiting”, then
press to select.
5. Press or to highlight “On” to activate the
Call Waiting service or “Off” to deactivate it, then
press to select.
6. Press .
Note
• The Call Waiting service may not be available on all
mobile phone networks. Contact your network
operator for more information.
(M 9-2)
(M 9-2-1)
146 Settings
To Check the Call Waiting Service Status
1. Perform steps 1 to 4 in “Call Waiting” on page 145.
2. Press or to highlight “Status”, then press
to select.
Now you can check the status of the Call Waiting
service.
3. Press C [Back].
Displaying Call Timers (M 9-2-2)
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Display Call Timers”,
then press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Showing Your Phone Number
This lets you control whether to show your phone
number when calling another party or not.
Some networks do not support this service. Please
check with your service provider for availability.
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Show Your Number”,
then press to select.
3. Press or to highlight “On” to show your
phone number or “Off” not to show your phone
number, then press to select.
To Check the Show Your Number Status
1. Perform steps 1 to 2 in “Showing Your Phone
Number”.
2. Press or to highlight “Status”, then press
to select.
Now you can check the status of the “Show your
Number”.
3. Press .
Adjusting Earpiece Volume
You can adjust the earpiece volume.
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Earpiece Volume”,
then press to select.
3. Press to increase the earpiece volume or press
to decrease the earpiece volume, then press .
(M 9-2-3)
(M 9-2-4)
Settings 147
Picture Call (M 9-2-5)
The image registered to the caller in the Contacts List is
displayed when receiving a call.
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Picture Call”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Auto Redial (M 9-2-6)
See “Automatic Redialling” on page 22 about this
function.
Minute Minder (M 9-2-7)
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Minute Minder”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
Call Setting Reset (M 9-2-8)
The call settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Call Waiting” on page 145.
2. Press or to highlight “Set to Default”, then
press to select.
3. Enter your handset code, then press .
4. Press A [Yes].
To cancel resetting, press C [No] in step 4.
Note
• If you enter the wrong handset code in step 3, the
operation is cancelled and the screen returns to step
3 in “Call Waiting” on page 145.
148 Settings
Diverts
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
Diverting Calls
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Diverts”, then press
to select.
4. Press or to highlight one of the divert
options, then press to select.
The divert options available are:
• “All Calls”: Diverts all voice calls without
ringing.
• “When Busy”: Diverts incoming calls when you
are on a call.
• “No Answer”: Diverts incoming calls if you do
not answer a call within a certain
period of time.
• “Not Reachable”: Diverts incoming calls when your
phone is out of network service or
switched off.
5. Press or to highlight “On”, then press to
select.
6. If you wish to divert calls to a number which is
located in the Contacts List, search for the desired
Contacts List entry.
Press A [Options] and press or to highlight
“Add Contact” to search the number by name or
press or to search in alphabetical order, then
press . For details on searching the Contacts List
entries, see “Finding a Name and Number” on
page 40.
7. If you wish to divert calls to a number which you
can enter manually, enter the phone number.
8. Press .
If you select “No Answer” in step 4:
9. Press or to highlight the period of time from
6 levels (05 to 30 seconds), then press to select.
(M 9-3)
Settings 149
Note
• When a divert is set to “All Calls”, “ ” is displayed
on the stand-by screen.
Tip
• If you select “By Service” in step 5, you can select
further divert options in the selected option in step 4.
Checking the Divert Status
1. Perform steps 1 to 3 in “Diverting Calls” on
page 148.
2. Press or to highlight the divert option you
wish to check, then press to select.
3. Press or to highlight “Status”, then press
to select.
You can now check the status of the selected divert
option.
4. When you have finished, press C [Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Diverting Calls” on
page 148.
2. Press or to highlight “Cancel All”, then
press to select.
3. Press A [Yes].
To cancel resetting, press C [No] in step 3.
4. Press .
All divert settings are cancelled.
To Cancel the Divert Settings Individually
1. Perform steps 1 to 3 in “Diverting Calls” on
page 148.
2. Press or to highlight the divert option you
wish to cancel, then press to select.
3. Press or to highlight “Off”, then press to
select.
4. Press .
The selected divert has been cancelled.
150 Settings
Date & Time
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Date & Time”, then
press to select.
4. Press or to highlight “Set Date/Time”, then
press to select.
5. Enter the day, month, year and time using the digit
keys, then press .
When you enter the time in the 12-hour format,
press P to switch between am and pm.
The order in which the date and time is displayed is
based on the format setting. See “To Select the Date
Format”.
To Select the Time System
1. Perform steps 1 to 3 in “Date & Time”.
2. Press or to highlight “Clock Settings”, then
press to select.
3. Press or to highlight “Time Format”, then
press to select.
4. Press or to highlight “12 hour” or “24 hour”,
then press to select.
To Select the Date Format
The date format can be switched between
“Day.Month.Year”, “Month-Day-Year” or “Year/
Month/Day”.
1. Perform steps 1 to 3 in “Date & Time”.
2. Press or to highlight “Clock Settings”, then
press to select.
3. Press or to highlight “Date Format”, then
press to select.
4. Press or to highlight “D.M.Y”, “M-D-Y” or
“Y/M/D”, then press to select.
To Set the Clock Display
1. Perform steps 1 to 3 in “Date & Time”.
2. Press or to highlight “Clock Settings”, then
press to select.
3. Press or to highlight “Display Format”, then
press to select.
4. Press or to highlight “Time Only”, “Date
Only” or “Date & Time”, then press to select.
To set hide clock, select “Off” in step 4, then press
.
(M 9-4)
Settings 151
Note
• The above setting is not effective for the clock display
setting of the external display.
To Set Daylight Saving Time
You can switch to daylight saving time without having
to change the clock time itself.
1. Perform steps 1 to 3 in “Date & Time” on page 150.
2. Press or to highlight “Clock Settings”, then
press to select.
3. Press or to highlight “Daylight Saving”,
then press to select.
4. Press or to highlight “On”, then press to
select.
To Set the Time Zone
1. Perform steps 1 to 3 in “Date & Time” on page 150.
2. Press or to highlight “Set Time Zone”,
then press to select.
3. Press or to highlight “Change Zone”, then
press to select.
4. Press or to set the home city, then press .
To Customise the Time Zone
1. Perform steps 1 to 3 in “Date & Time” on page 150.
2. Press or to highlight “Set Time Zone”, then
press to select.
3. Press or to highlight “Set Custom Zone”,
then press to select.
4. Enter the time-zone differences using the digit keys,
then press .
Each press of P switches – and +.
152 Settings
Network Settings
Selecting a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Network Settings”,
then press to select.
4. Press or to highlight “Select Network”, then
press to select.
5. Press or to highlight “Automatic”, then
press to select.
To Set the Network Manually
Perform the following if you wish to connect to the
networks other than the preferred network which is
automatically connected to.
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press or to highlight “Manual”, then press
to select.
3. Press or to highlight the network from the
list, then press to select.
Adding a New Network
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
2. Press or to highlight “Add New Network”,
then press to select.
3. Press or to highlight “Add”, then press
to select.
4. Enter the country code.
5. Press .
6. Enter the network code.
7. Press .
8. Enter a new network name.
9. Press .
(M 9-5)
(M 9-5-1)
Settings 153
Editing the Preferred List
To Change the Position of a Network in the
Preferred List
1. Perform steps 1 to 4 in “Selecting a Network
Automatically” on page 152.
2. Press or to highlight “Set Preferred”, then
press to select.
3. Press or to highlight the name of the
network to change the position from the list, then
press to select.
4. Press or to highlight “Insert” or “Add to
end”, then press to select.
To Delete a Network from the Preferred List
1. Perform steps 1 to 3 in “To Change the Position of
a Network in the Preferred List”.
2. Press or to highlight “Delete”, then press
to select.
Changing the Network Password
1. Perform steps 1 to 3 “Selecting a Network
Automatically” on page 152.
2. Press or to highlight “Change Password”,
then press to select.
3. Enter the old password, then press .
4. Enter a new password, then press .
5. Enter a new password again, then press .
If you enter the incorrect password in step 5, the
screen will return to step 2 and you are asked to
enter the password again.
6. Press .
Selecting an Applicable Zone
Your phone tries to select an applicable zone
automatically on startup. You can also select it
according to the area.
For America:
1. Perform steps 1 to 3 in “Selecting a Network
Automatically” on page 152.
2. Press or to highlight “Select Zone”, then
press to select.
3. Press or to highlight “America”, then press
to select.
For other countries, highlight “Europe, Asia, etc.”,
then press to select.
(M 9-5-2)
(M 9-5-3)
154 Settings
Internet Settings
WAP/MMS Settings
WAP settings and MMS settings can perform following
various setups, respectively. In normal operation, you
do not need to change these settings.
WAP Settings (M 9-6-1)
Item Description Operation
Profile Name*
WAP Profile
Name (Unique
Name)
Press or to
highlight “Profile Name” and
press to select.
Enter the desired strings
and press .
IP Address* IP address
Press or to
highlight “IP Address” and
press to select.
Enter IP address for WAP
and press .
Homepage Homepage
Press or to
highlight “Homepage” and
press to select.
Enter Homepage URL, if
needed, and press .
(M 9-6)
Port Number*
Security
Option
Press or to
highlight “Port Number” and
press to select.
Enter Port Number (1024-
65535) and press .
Circuit Prompt Circuit Prompt
Press or to
highlight “Circuit Prompt”
and press to select.
Press or to
highlight “Enable” or
“Disable” and press to
select.
Connection
Type
Bearer
Connection
Type
Press or to
highlight “Connection Type”
and press to select.
Press or to
highlight “GPRS Then
CSD”, “GPRS” or “CSD”
and press to select.
Item Description Operation
Settings 155
GPRS Settings (If “GPRS Then CSD” or “GPRS” is selected
as connection type, they should be set)
APN*
Access Point
Name
Press or to
highlight “APN” and press
to select.
Enter Access Point Name
and press .
Username User Name
Press or to
highlight “Username” and
press to select.
Enter User Name and press
.
Password Password
Press or to
highlight “Password” and
press to select.
Enter Password and press
.
Linger Time Linger Time
Press or to
highlight “Linger Time” and
press to select.
Enter time in seconds (0-
99999) and press .
Item Description Operation
CSD Settings (If “GPRS Then CSD” or “CSD” is selected as
connection type, they should be set)
Phone No.*
Access Point
Number
Press or to
highlight “Phone No.” and
press to select.
Enter Access Point Number
and press .
Line Type
ISDN or
Analogue
Press or to highlight
“Line Type” and press to
select.
Press or to highlight
“ISDN” or “Analogue” and
press to select.
Username User Name
Press or to
highlight “Username” and
press to select.
Enter User Name and press
.
Password Password
Press or to
highlight “Password” and
press to select.
Enter Password and press
.
Item Description Operation
156 Settings
*: Item to be set as mandatory.
MMS Settings (M 9-6-2)
Linger Time Linger Time
Press or to
highlight “Linger Time” and
press to select.
Enter time in seconds (0-
99999) and press .
Item Description Operation
Item Description Operation
Profile Name*
MMS Profile
Name (Unique
Name)
Press or to
highlight “Profile Name” and
press to select.
Enter the desired strings
and press .
IP Address* IP address
Press or to
highlight “IP Address” and
press to select.
Enter IP address for MMS
and press .
Relay Server
URL*
MMS Relay
Server
Press or to
highlight “Relay Server
URL” and press to
select.
Enter URL of the Relay
Server and press .
Settings 157
Port Number*
Security
Option
Press or to
highlight “Port Number” and
press to select.
Enter Port Number (1024-
65535) and press .
Connection
Type
Bearer
Connection
Type
Press or to
highlight “Connection Type”
and press to select.
Press or to
highlight “GPRS Then
CSD”, “GPRS” or “CSD”
and press to select.
GPRS Settings (If “GPRS Then CSD” or “GPRS” is selected
as connection type, they should be set)
APN*
Access Point
Name
Press or to
highlight “APN” and press
to select.
Enter Access Point Name
and press .
Item Description Operation
Username User Name
Press or to
highlight “Username” and
press to select.
Enter User Name and press
.
Password Password
Press or to
highlight “Password” and
press to select.
Enter Password and press
.
Linger Time Linger Time
Press or to
highlight “Linger Time” and
press to select.
Enter time in seconds (0-
99999) and press .
CSD Settings (If “GPRS Then CSD” or “CSD” is selected as
connection type, they should be set)
Phone No.*
Access Point
Number
Press or to
highlight “Phone No.” and
press to select.
Enter Access Point Number
and press .
Item Description Operation
158 Settings
*: Item to be set as mandatory.
Line Type
ISDN or
Analogue
Press or to
highlight “Line Type” and
press to select.
Press or to
highlight “ISDN” or
“Analogue” and press
to select.
Username User Name
Press or to
highlight “Username” and
press to select.
Enter User Name and press
.
Password Password
Press or to
highlight “Password” and
press to select.
Enter Password and press
.
Item Description Operation
Linger Time Linger Time
Press or to
highlight “Linger Time” and
press to select.
Enter time in seconds (0-
99999) and press .
Item Description Operation
Settings 159
To Set Up Your Account Information
This information should be supplied by your Internet
service provider.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Internet Settings”,
then press to select.
4. Press or to highlight “WAP Settings” or
“MMS Settings”, then press to select.
5. Press or to highlight the profile name you
wish to edit, then press A [Options].
6. Press or to highlight “Edit”, then press
or A [Select] to select.
7. Press or to highlight the item you wish to
edit, then press to select.
8. Edit each item.
9. When you have finished editing, press A [Save].
To Select Network Connection Profile
1. Perform steps 1 to 4 in “To Set Up Your Account
Information”.
2. Press or to highlight the profile name to use,
then press to select.
160 Settings
Infrared
You can use the built-in infrared modem to establish
contact between your phone and a PC equipped with an
infrared port.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Infrared”, then press
to select.
4. Press or to highlight “On”, then press to
select.
“ ” will appear on the screen.
The infrared setting will return to off when no data
is transmitted/received via infrared communication.
Security
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the
PIN code each time the phone is switched on. Your PIN
code is stored on the SIM card and you should have
been made aware of the code when you purchased the
SIM card. Contact your service provider for further
details.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Security”, then press
to select.
4. Press or to highlight “PIN Entry”, then press
to select.
5. Press or to highlight “On” or “Off”, then
press to select.
6. Enter your PIN code, then press .
7. Press .
Note
• If you enter the wrong PIN code three times in step 6,
the SIM card will lock. To remove the lock, contact
your service provider/SIM card vendor.
(M 9-7) (M 9-8)
(M 9-8-1)
Settings 161
To Change PIN Code
This allows you to change the PIN code stored on the
SIM card. Before you change the PIN code, select “On”
in step 5 in “Enabling/Disabling the PIN Code” on
page 160.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 160.
2. Press or to highlight “PIN Entry”, then press
to select.
3. Press or to highlight “Change PIN”, then
press to select.
4. Enter the existing PIN code, then press .
5. Enter a new PIN code, then press .
6. Enter a new PIN code again, then press .
If you enter a code different from the code which
you entered in step 6, the screen returns to step 5.
Enter the correct code again.
7. Press .
Handset Lock
The Handset Lock is an additional security feature
which prevents unauthorised use of the phone or certain
features. The default handset lock code is “0000”.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 160.
2. Press or to highlight “Handset Lock”, then
press to select.
3. Press or to highlight “On” or “Off”, then
press to select.
4. Enter your handset code, then press .
If you enter an incorrect handset code, the screen
will clear and you are prompted to enter the code
again.
To Change Handset Code
Before you change the handset code, select “On” in step
3 in “Handset Lock”. The default handset code is
“0000”.
1. Perform steps 1 to 2 in “Handset Lock”.
2. Press or to highlight “Change Code”, then
press to select.
3. Enter the old handset code, then press .
(M 9-8-2)
162 Settings
4. Enter a new handset code, then press .
5. Enter the new handset code again, then press .
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code again.
Changing PIN2 Code (M 9-8-3)
PIN2 code is used to protect certain functions in the
phone such as Fixed Dialling No. and call cost limits.
The following shows you how to change PIN2 code.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 160.
2. Press or to highlight “Change PIN2”, then
press to select.
3. Enter the existing PIN2 code, then press .
4. Enter a new PIN2 code, then press .
5. Enter the new PIN2 code again, then press .
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code.
6. Press .
Call Barring
This function lets you place restrictions on incoming
and outgoing calls. To activate Call Barring you will
need the call barring password, which is available from
your service provider.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Security”, then press
to select.
4. Press or to highlight “Call Barring”, then
press to select.
5. Press or to highlight call barring option,
then press to select.
The call barring functions available are:
• “Bar Foreign Calls”: Restricts all outgoing
international calls.
• “Only Local & Home”:Restricts all outgoing
international calls except to
your home country.
• “Bar Incoming Calls”: Restricts all incoming calls.
(M 9-8-4)
Settings 163
• “Bar Inc if Abroad”: Restricts all incoming calls
when you are outside of the
coverage from your
registered network operator.
• “Bar Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
6. Press or to highlight one of the call barring
options, then press to select.
The call barring options available are:
• “All services”: Restricts all services.
• “Voice Calls”: Restricts all voice calls.
• “Data”: Restricts all data calls.
• “Fax”: Restricts all fax calls.
• “Messages”: Restricts all messages.
• “All except msgs”: Restricts all services except
messages.
7. Press or to highlight “On”, then press to
select.
If you select “Off”, the selected call barring setting
is cancelled.
8. Enter the network password, then press .
To change the network password, see “Changing
the Network Password” on page 153.
9. Press .
The selected call barring function is activated.
If you enter a wrong network password, the entered
password is cleared. Enter the correct the password.
To Check Call Barring Status
1. Perform steps 1 to 6 in “Call Barring” on page 162.
2. Press or to highlight “Status”, then press
to select.
Now you can check the status of the selected call
barring option.
3. When you finish the confirmation, press C [Back].
164 Settings
To Cancel All Call Barring Settings
1. Perform steps 1 to 4 in “Call Barring” on page 162.
2. Press or to highlight “Cancel All”, then
press to select.
3. Enter the network password, then press .
4. Press .
All call barring settings are cancelled.
To Cancel the Call Barring Setting Individually
1. Perform steps 1 to 5 in “Call Barring” on page 162.
2. Press or to highlight the call barring option
you wish to cancel, then press to select.
3. Press or to highlight “Off”, then press to
select.
4. Enter the Barring password, then press .
The selected call barring setting is cancelled.
Fixed Dialling No. (M 9-8-5)
When the Fixed Dialling No. is enabled, you can only
call predefined numbers.
To Enable Fixed Dialling No.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Security”, then press
to select.
4. Press or to highlight “Fixed Dialling No.”,
then press to select.
5. Enter a PIN2 code, then press .
6. Press or to highlight “Settings”, then press
to select.
7. Press or to highlight “On”, then press to
select.
If you select “Off”, Fixed Dialling No. is disabled.
Settings 165
To Add a New Name
1. Perform steps 1 to 5 in “To Enable Fixed Dialling
No.” on page 164.
2. Press or to highlight “Edit Dial List”, then
press to select.
3. Press
A
[Options] to display the Options menu.
4. Press or to highlight “Add New Contact”,
then press or
A
[Select] to select.
5. Add a name and a phone number.
For details on adding a name and a phone number,
see “Creating a New Entry” on page 36.
6. Press
C
[Save] to save.
To Search a Registered Name
1. Perform steps 1 to 3 in “To Add a New Name”.
2. Press or to highlight “Search”, then press
to select.
3. Search for the desired name.
For details on searching a name, see “Finding a
Name and Number” on page 40.
To Edit a Registered Name
1. Perform steps 1 and 2 in “To Add a New Name”.
2. Press or to highlight a name you wish to
edit, then press
A
[Options] to display the Options
menu.
3. Press or to highlight “Edit”, then press
or A [Select] to select.
4. Edit the selected name.
For details on editing a name, see “Editing Contacts
List Entries” on page 41.
166 Settings
To Delete a Registered Name
1. Perform steps 1 and 2 in “To Add a New Name” on
page 165.
2. Press or to highlight a name you wish to
delete, then press
A
[Options] to display the
Options menu.
3. Press or to highlight “Delete”, then press
or
A
[Select] to select.
4. Press A [Yes].
The selected name is deleted.
To cancel deletion, press
C
[No] in step 4.
Master Reset
All settings can be reset to their default settings.
1. Press to display the Main menu.
2. Press , , or to highlight “Settings”,
then press to select.
3. Press or to highlight “Master Reset”, then
press to select.
4. Enter your handset code, then press .
5. Press A [Yes].
To cancel resetting, press C [No] in step 5.
All settings are reset.
Note
• If you enter a wrong handset code in step 4, the
operation is cancelled.
(M 9-9)
Connecting GX20 to Your PC 167
Connecting GX20 to Your PC
You can use the following functions by connecting the
GX20 to your PC using an infrared port or RS232C
port*:
• GSM/GPRS modem
• Handset Manager for GX20
* Requires an optional data cable XN-1DC10 for
RS232C (COM) port connection.
System Requirements
Operating System: Windows
®
98*, Windows
®
Me,
Windows
®
2000**, Windows
®
XP
* Windows
®
98 Second Edition, Windows
®
98 with
Internet Explorer 5.01 or later
**Service Pack 3
Interface: Infrared port or RS232C port
CD-ROM drive
GSM/GPRS Modem
You can use GX20 as a GSM/GPRS modem to access
the Internet from your PC.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Handset Manager
You can transmit picture, sound and video clip, and
Contacts List entries between your phone and your PC,
and can use Contacts List entries on your PC.
For details on software support, refer to the following
site:
http://www.sharp-mobile.com
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM
drive.
The GX20 CD-ROM screen is displayed.
If the GX20 CD-ROM screen is not displayed,
double-click [Launcher.exe] in your CD-ROM.
2. Press the desired button.
The installation starts.
3. Follow the on-screen instructions to complete
installation.
168 Connecting GX20 to Your PC
Note
Infrared communication
• Infrared ports need to be aligned with each other.
• Infrared ports need to be placed within 20 cm of each
other and within a 30° angle.
• It is not recommended that you make or answer a call
during data transmission. The operation may be
interrupted.
GSM/GPRS modem
• It is not recommended that you make or answer calls
when you are using GX20 as a GSM/GPRS modem.
The operation may be interrupted.
• When transmitting data via infrared communication,
you need to set the infrared setting to “On”. (p. 160)
Handset Manager
• Some large files may not be able to be transmitted
from the PC to the phone.
• When connecting your phone to a PC, you need to
select the connection method for PC Link. (p. 122)
Infrared port
Troubleshooting 169
Troubleshooting
Problem Solution
The phone does not
turn on.
• Make sure the battery is
properly inserted and
charged.
PIN code or PIN2
code is rejected.
• Make sure you have entered
the correct code (4 to 8 digits).
• Your SIM card/protected
functions will become locked
after 3 unsuccessful attempts.
• Contact your SIM provider if
you do not have the correct
PIN code.
The SIM card
becomes locked.
• Enter PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
operational again. Otherwise
contact your dealer.
The display is
difficult to read.
• Adjust the backlight
brightness for the main
display, and adjust the LCD
contrast for the external
display.
Phone functions do
not work after the
phone is turned on.
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
• Make sure the SIM card is
correctly inserted.
Calls cannot be
made or received.
• If the message “SIM Card
Error” is displayed at start-up,
you cannot use your SIM card
or the SIM card is damaged.
Contact your dealer or
network service provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communication using Infrared
(IrDA) or a data cable.
• Check the remaining balance
if you are using a pre-paid
SIM card.
Problem Solution
170 Troubleshooting
Call quality is poor.
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
Cannot access
network service.
• Check where your account
has been registered and
where the service is
available.
Cannot send or
receive Text
Message.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
provider.
Cannot connect to
Multimedia
Message service
provider.
• MMS settings and
configuration may be missing
or incorrect or the network
does not support it. Check
your service provider’s
access point number.
Contact your service provider
to confirm the correct
settings.
Problem Solution
Limited memory
available.
• Delete any unnecessary data.
Call is terminated
unexpectedly.
• Magnetised objects such as
health necklaces placed near
the phone may terminate the
call. Keep your phone away
from such objects.
No entries are
displayed in the
Contacts List
• Confirm that the source
setting (Handset or SIM) and
View Groups setting are
made correctly.
Fax transmission
failure
• Before transmitting fax data,
configure your fax software to
use the software flow control.
• Use of the optional data cable
is recommended for
transmitting fax data.
Problem Solution
Safety Precautions and Conditions of Use 171
Safety Precautions and
Conditions of Use
Your phone conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
CONDITIONS OF USE
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as
your phone may interfere with the aircraft’s
electronic systems). Current legislation forbids this
use and legal action can be taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the
performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.).
When the phone function is on, do not bring it near
medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or
a pacemaker, only use the phone on the opposite side
of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a
pacemaker ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile
phones at gasoline stations, chemical plants and at all
sites where a risk of explosion exists.
Caring for your phone
• Do not allow children to use your phone without
supervision.
• Do not open or attempt to repair your phone yourself.
The product can only be repaired by authorised
service personnel.
• Do not drop your phone or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a
soft, dry cloth.
• Do not carry your phone in your back pocket as it
could break when you sit down. The display is made
of glass and is particularly fragile.
• Avoid touching the external connector on the
underside of the phone, since the delicate
components within can be damaged by static
electricity.
172 Safety Precautions and Conditions of Use
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
• Network configuration and phone usage will
affect talk-time and stand-by time.
Using the games or camera will hasten battery
consumption.
•
When the battery charging alert is displayed on
the screen, charge the battery as soon as
possible. If you continue using your phone ignoring
the alert, the phone may cease to function, and all
data and settings you have stored may be lost at any
moment.
• Before removing the battery from the phone, make
sure the phone is switched off.
• Replace and charge the new battery as soon as
possible after removing the old one.
• Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of non-
conductive material for keeping and carrying the
battery safely.
• Recommended temperature for using and storing
batteries is approximately 20°C.
• The batteries’ performance is limited in low
temperatures, particularly below 0°C and the phone
may not work temporarily regardless of the amount
of remaining battery power.
• Exposing the phone to extreme temperatures will
shorten battery life.
• The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and stand-by time) is
noticeably shorter than normal, it is time to buy a new
battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 14.
Aerial Care
• Do not touch the aerial unnecessarily, whilst using
the mobile phone. If it is held, call quality may be
hindered leading to shortened talk-time and stand-by
time because the mobile phone may have to operate
on a higher power level than is necessary.
Safety Precautions and Conditions of Use 173
• Use only the aerial supplied or one approved by
Sharp for your mobile phone. Using unauthorised or
modified aerials may damage the mobile phone.
Moreover, since the mobile phone may violate the
appropriate regulations, it may lose performance or
exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the
aerial of the mobile phone.
• Whilst talking directly to the microphone, please
hold the mobile phone so that the aerial is upwards
over your shoulder.
• To avoid interfering with blasting operations, please
turn off the mobile phone in a blasting area or in a
place where a “turn off two-way radio” sign is
posted.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The display supports up to 65,536 colours.
The taken pictures can be saved in JPEG format
(JPEG high-colour).
• Be careful not to move your hand whilst taking
pictures.
If the phone moves whilst taking a picture, the picture
can be blurred. When taking a picture, hold the phone
firmly to prevent it from moving, or use the delay
timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
Others
• As with any electronic storage unit, data may be lost
or corrupted under various circumstances.
• Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
• If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
• Use only the attached hands free. Some phone’s
functions may not work when unauthorised hands
free are used.
174 Safety Precautions and Conditions of Use
• The phone uses the magnet to recognise that the
phone is closed. Do not place magnetic cards near
your phone or get the card caught in the phone as it
may damage the recorded data.
• Do not flash the mobile light into eyes as this may
damage eyesight or cause dizziness leading to
accidents or injury.
ENVIRONMENT
• Keep your phone away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
• Since this product is not waterproof, do not use it or
store it where fluids such as water can splash onto it.
Raindrops, water spray, juice, coffee, steam,
perspiration, etc. will also cause a malfunction.
PRECAUTIONS CONCERNING
VEHICLE USE
• It is the user’s responsibility to verify if local laws
permit the use of a mobile phone in a vehicle. Give
full attention to driving. Pull off onto the side of a
road and park the car before making or answering a
call.
• If local laws permit, we recommend that you use your
phone with the attached hands free.
• Use of your phone’s function may interfere with the
vehicle’s electronic systems, such as the ABS anti-
lock brakes or the air-bag. To ensure no such problem
occurs, please check with your dealer or car
manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel
to install the vehicle accessories.
The manufacturer disclaims any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
Safety Precautions and Conditions of Use 175
SAR
Your Sharp mobile phone has been designed,
manufactured and tested so as not to exceed the limits
for exposure to electromagnetic fields set by the
Australian Radiation Protection and Nuclear Safety
Agency (ARPANSA). These limits are part of
comprehensive guidelines developed by independent
scientific organizations. The guidelines include a
substantial safety margin designed to assure the safety
of the phone user and others and to take into account
variations in age and health, individual sensitivities and
environmental conditions. The exposure standards
provide for the amount of radio frequency
electromagnetic energy absorbed by the body when
using a mobile phone to be measured by reference to
the Specific Absorption Rate (SAR).
The SAR limit for the general public is currently 2.0
watts per kilogram averaged over 10 gram tissue. Your
Sharp mobile phone SAR value is 0.475 watts per
kilogram. This has been tested to ensure that this limit
is not exceeded even when the phone is operating at its
highest certified power. In use however your Sharp
mobile phone may operate at less than full power
because it is designed to use only sufficient power to
communicate with the network.
176 Index
Index
Symbols
# key 10
* /Shift key 9
A
Accessories 7
Alarm 116
Changing alarm settings 118
Disabling alarm function 118
Resetting alarm setting 119
Resetting all alarm settings 119
Setting alarm 116
Setting time zone 151
Any Key Answer 129
Applications 83, 114
Alarm 116
Backlight 102
Calculator 119
Calendar 114
Checking information 85
Clearing all applications 105
Deleting 85
Downloading 83, 101
Ending 85
Executing 84, 100
Java™ information 105
Online confirmation 104
Online setting 100
Operation priority 101
PC Link 122
Phone Help 122
Reset 104
Resume time 101
Setting blinking operation 103
SIM Application Tool 114
Suspending 85
Vibration 103
Voice memo 121
Volume 102
Area Info 78
Enabling/Disabling 78
B
Battery 11
Charging 14
Disposal 14
Inserting 11
Removing 13
Battery level indicator 15
Bookmarks 97
Busy tone 23
C
Calculator 119
Rate conversion 120
Calendar 114
Deleting schedules 115
Finding a particular date 114
Call 21
Answering 23
Ending 22
Holding 24
Making 21
Making another call during a
call 24
Putting on hold 24
Rejecting 23
Call Costs 132
Checking charge limit 134
Checking charge rate 133
Checking cost of last call 132
Checking residual credit 134
Checking total call cost 133
Resetting all call costs 134
Setting charge limit 133
Setting charge rate 133
Index 177
Call Log 130
Deleting 131
Sending messages 130
Viewing 130
Call Settings 145
Adjusting earpiece volume 146
Auto Redial 147
Call waiting 145
Display Call Timers 146
Minute Minder 147
Resetting 147
Show Your No. 146
Call Timers 131
Checking duration of last call
131
Checking total call time 131
Resetting all call timers 132
Call waiting 25, 145
Camera 10, 47
Digital camera 47
Video camera 54
Cell Broadcasts 76
Enabling/Disabling 76
Reading 77
Setting languages 77
Subscribing 77
Centre key 9
Centre key/Navigation keys 17
Characters 29
Changing input method 30
Changing the input languages 30
Copying text 31
Cuttings text 31
Entering 29
Pasting text 31
Symbols and punctuation 30
T9 text input 30
Table of characters 29
Conference call 26
Adding new participants 27
Ending call with a participant 27
Making a conference call 26
Private conversation 27
Contacts 130
Dialling 40
Swapping location number of
the phone number 46
Contacts List 35
Adding number from call Log
38
Changing the memory to be used
35
Creating 36
Deleting 42
Dialling 40
Editing 41
Finding 40
Memory status 44
Sending messages 45
Storing input number 38
Viewing groups 42
D
Data Counter 134
Resetting 134
Delivery report
Confirming 67
Dial tone
Muting 28
Digital camera 47
Adjusting the brightness of the
picture 50
Continuous shooting 51
Deleting pictures 53
Indicators 49
Retaking pictures 49
Selecting light colour 53
Selecting the frame 52
Selecting the picture quality 48
Selecting the picture size 48
Selecting the shutter sound 53
Sending pictures 53
178 Index
Switching the viewfinder 48
Taking close-up pictures 48
Using the timer 51
Using the zoom function 48
Viewing the taken pictures 50
Display indicators 17, 19
External display 19
Diverts 148
Cancelling all divert settings
149
Cancelling divert settings
individually 149
Checking divert status 149
Divert calls 148
DTMF tone 28
Muting 28
E
Earpiece 9
Earpiece volume 24
Adjusting 24
Emergency calls 21
End/Power key 10
External connector 10
F
Flash light 10
Fun & Games 100
G
Group call 43
H
Hands free connector 9
I
Indicators
External display 19
Infrared 160
Infrared port 10
Input languages
Changing 30
Input method 30
Changing 30
International calls 21
L
Left soft key 9, 17
M
Macro dial 10
Main display 9, 17
Main menu 32
List of menu functions 34
Operation guidance 32
Shortcut keys 32
Master reset 166
Melody Editor 105
Copying/Pasting notes 113
Creating your original ringtone
105
Deleting 111
Editing 112
Musical scale/rest 107
Strength 111
Tone 109
Types of notes/rests 108
Memory status 99
Menu 32
Main menu 32
Operation guidance 32
Shortcut keys 32
Messages
MMS 59
SMS 70
Microphone 10
Muting 28
Mobile light 10, 14
Multimedia Message 59
Adding recipients 61
Check the sender and receiver
phone number or e-mail
address 64
Creating 59
Index 179
Deleting 68
Forwarding 65
Inserting attached data 62
Lock/Unlock 68
Making a call 68
Modifying 66
Reading 64
Replying 65
Re-sending 67
Retrieving 66
Saving in Drafts box 61
Sending message in Drafts box
63
Setting up 69
Storing the phone number or
e-mail address of a sender
in the Contacts List 66
Turning the slide show setting
on or off 62
My Numbers 135
My Stuff 83
N
Navigation keys (Arrow keys) 9, 32
Network settings 152
Adding new network 152
Changing network password
153
Editing preferred list 153
Selecting a network
automatically 152
P
PC connection
GSM/GPRS modem 167
Handset Manager 167
Software installation 167
System requirements 167
Phone settings 136
Assigning pictures 140
Backlight 138
Brightness of backlight 138
Changing language 136
Display saving 139
External display 141
Greeting message 139
Main display 136
Resetting 145
Pictures 86
Adjusting size 90
Changing file name 89
Checking information 92
Deleting 91
Downloading 89
Editing pictures 87
Saving to Contacts List 86
Sending messages 91
Using as wallpaper 86
Viewing 89
PIN code 160
PIN2 code 162
Profiles 123
Activating 123
Customising 124
Keypad tones 126
Low battery alert 129
Melody assignment 125
Message alert 128
Power on/off sound 128
Resetting 124
Ringer volume 125
Vibration 126
Warning tone 127
R
Redialling 22
Auto redial 22
Right soft key 9, 17
Ringtone 43
S
SAR 175
Screensavers 100
180 Index
Security 160
Call Barring 162
Changing handset code 161
Changing PIN code 161
Changing PIN2 code 162
Enabling/Disabling PIN code
160
Fixed Dialling No. 164
Handset Lock 161
Send key 9
Settings 136
Any Key Answer 129
Call settings 145
Date & Time 150
Diverts 148
Infrared 160
Internet 154
Master Reset 166
MMS 156
Network settings 152
Phone settings 136
Security 160
WAP 154
SIM card 11
Inserting 11
Removing 13
Sounds 92
Changing file name 93
Checking information 93
Deleting 94
Downloading 92
Playing back 93
Sending messages 94
Strength 94
Tone 94
Speaker 10
Speed Dial List 135
Assign 135
Clear All 135
Delete 135
Re-assign 135
Speed dialling 21, 45
Status indicators 17
Still camera
Sending messages 91
T
Text (SMS) 70
Text message 70
Calling 73
Connection type 76
Creating 70
Deleting 74
Extracting phone numbers 74
Forwarding 73
Message format 75
Modifying 73
Optimisation 76
Reading 72
Replying 72
Saving in Outbox 70
Sending 71
Setting up 75
Validity period 75
Text template 98
Adding phrases 98
Deleting 99
Editing 98
Using 31, 61, 70
Viewing 98
Troubleshooting 169
Turning your phone on and off 16
V
Video camera 54
Adjusting the brightness of the
video clips 56
Deleting video clips 58
Indicators 55
Recording close-up video clips
54
Recording video clips 54
Index 181
Recording video clips with
sound 58
Selecting light colour 58
Selecting the video quality 55
Sending video clips 58
Using the timer 57
Using the zoom function 55
Viewing the recorded video
clips 56
Video clips 95
Changing file name 96
Checking information 96
Deleting files 97
Downloading 95
Playing back 95
Sending messages 96
Viewfinder switch key 9
Vodafone live! 79
Adding a bookmark 81
Browser menu 80
Exiting WAP browser 79
Navigating WAP page 80
Viewing WAP browser 79
Voice mail key 9
Voice memo 121
Playing back 121
Recording 121
W
WAP settings 154
… 162 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp gx20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp gx20 in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp gx20

Sharp gx20 User Manual - German - 190 pages

Sharp gx20 User Manual - Dutch - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info