787660

Sharp GX-BT60 Manual

8
Zoom out
Zoom in
Previous page
1/64
Next page
connection. The GX-BT60 will prompt
“disconnected”. Then other Bluetooth
devices can  nd and pair with the
GX-BT60.
Duo Mode
Dual speaker wireless stereo pairing for
wide stereo sound stage.
1. Press the power button on the  rst
speaker to turn the speaker “On”
2. Press and hold the Volume + and
Volume - buttons on the  rst speaker
until the speaker says “Duo Mode
pairing” then release the buttons
3. Press the power button on the second
speaker to turn the speaker “On”
4. Press and hold the Volume + and
Volume - buttons on the second
speaker until the speaker says “Duo
Mode pairing” then release the buttons
5. Please wait until you hear the voice
prompt “Duo Mode connected”.
This may take up to 1 minute. The
speakers are now connected to each
other.
6. The  rst speaker in which Duo Mode
was initiated is the master speaker and
will be the right stereo channel. You
should pair your mobile device with
this speaker.
For Bluetooth pairingto a Bluetooth-out
enabled smart device search for “GX-BT60”
on your device and pair.
If you receive a phone call while in Duo
Mode the call will only come through the
master speaker.
When in Duo Mode and you Power off one
speaker both speakers will power off .
When you Power on the speakers, they
need to be turned on individually.
When both speakers are powered on Duo
Mode will automatically reconnect and
you will hear “Duo Mode connected”.
To disconnect Duo Mode press and hold
Volume + and Volume - until you hear “Duo
Mode disconnected”.
To clear Duo Mode pairing press and hold
Volume + and Volume - until the speaker
says “Duo Mode cleared”. This takes about
8 seconds.
Assuming direct line of sight, you should
achieve be able to achieve a range of over
40 metres between the two speakers.
When used indoors, the range will be
aff ected by any internal walls or obstacles
between the speakers.
Aux in Mode
Use the 3.5mm audio cable (included) to
connect the speaker to an audio source
(PC, MP3/MP4, mobile phone).
When you plug the Aux cable into the
GX-BT60 it will automatically change to
Aux in mode. When you unplug the Aux
cable the GX-BT60 will change back to
Bluetooth mode.
The speaker will play the music from the
audio source.
► Click to mute play back
Click to decrease volume
Click to increase volume
To change or control tracks please use your
music source when in Aux in mode.
EN
Model SHARP GX-BT60
Output Power 6W (RMS)@10% THD
Power Consumption 6W
Power consumption – Standby <1mW
Frequency Response 110Hz - 20kHz
Operating Temperature 5°C - 40°C
Battery Type Li-ion 3,7V / 1800mAh / 6,66Wh
Bluetooth
Version V 5.0
Frequency bands 2402 MHz ~ 2480 MHz
Maximum power transmitted <20dBm
6
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp GX-BT60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp GX-BT60 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 0.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info