463410
167
Zoom out
Zoom in
Previous page
1/171
Next page
165
The malfunctions shown in the left-hand column below, labelled “Fault,” do not necessarily indicate functional
faults of the machine. It is therefore advisable to refer to the “Checking” shown in the right-hand column before
calling for service.
Error message table
Fault Checking
The display won't be illuminated even when
the mode switch is turned to any other
position than “ ”.
• Is power supplied to the electrical outlet?
• Is the power cord plug out or loosely connected to the
electrical outlet?
(1)
The display is illuminated, but the whole machine
refuses registrations.
• Is a cashier code assigned to the register?
• Is a clerk code assigned to the register?
• Is the mode switch set properly at the “REG” position?
(2)
No receipt is issued. • Is the receipt paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?
• Is the print head release lever at the printing position?
(3)
No journal paper is taken up. • Is the take-up spool installed on the bearing properly?
• Is there a paper jam?
(4)
Printing is unusual. • Is the print head release lever at the printing position?
• Is the paper roll properly installed?
(5)
Before calling for service
9
Text
Description
In default of
no. programming
1 Registration error ENTRY ERROR
2 Misoperation error MISOPERATION
3
Desired code is not
NO RECORD
programmed yet.
4 (Reserved)
5 Secret code error SECRET CODE
6 (Reserved)
7 Memory is full. MEMORY FULL
8 Insert slip paper. INSERT SLIP
9
The entered cashier code
NO AUTHORITY
is not authorized.
10 Stock is empty. OUT OF STOCK
11
Compulsory pushing
SBTL COMPUL.
the subtotal key
12 Compulsory tendering TEND COMPUL.
13 Compulsory PBAL PB COMPUL.
14-21 (Reserved)
22 Overlapped cashier error CASHIER ERR.
23 Cashier resetting over error ENTRY ERR CA
24-26 (Reserved)
27 Power off POWER OFF
28-30 (Reserved)
31 Compulsory non-add code # COMPULSORY
32
The cashier/clerk is not
NOT ASSIGNED
assigned.
33 (Reserved)
34 Overflow limitation OVER LIMIT.
Text
Description
In default of
no. programming
35
The open price entry is
INH. OPEN PR
inhibited.
36
The unit price entry is
INH. UNIT PR
inhibited.
The direct non-tendering
37 finalization after previous NOT NON-TEND
tender entry is inhibited.
38-66 (Reserved)
67 REG buffer is full. BUFFER FULL
68-71 (Reserved)
72 EFT error EFT ERROR
73 EFT connection is broken. EFT BREAK
74-75 (Reserved)
76
Closing the drawer is
CLOSE DRAWER
compulsory.
77-80 (Reserved)
81 Entry of secret code is needed. ENTR SECRET#
82-83 (Reserved)
84 Data backup send success SEND OK
85 Data backup receive success RECEIVE OK
86
Data backup communication
COM. ERROR
error
87 Backup data format error DATA ERROR
88 Data backup time out error TIME OUT
89-94 (Reserved)
95 EURO change compulsory EURO CHANGE
MAINTENANCE-A410/A420 02.4.20 6:51 PM Page 165
167


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ER-A420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ER-A420 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ER-A420

Sharp ER-A420 Additional guide - German - 7 pages

Sharp ER-A420 User Manual - German - 171 pages

Sharp ER-A420 User Manual - Dutch - 168 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info