Manual Sharp ER-A160 (page 7 of 180) (English, German, French, Spanish)

485960

Zoom out

Zoom in

1/180

The mode switch can be operated by inserting one of the two supplied mode keys - manager (MA) and operator

(OP) keys. These keys can be inserted or removed only in the “REG” or “” position.

The mode switch has these settings:

: This mode locks all register operations. (AC power becomes off.)

No change occurs to register data.

OP X/Z: To take individual cashier X or Z reports, and to take flash reports.

And it can be used to toggle receipt state “ON” and “OFF” by

pressing the

key.

REG: For entering sales.

PGM: To program various items.

: Enters into the void mode. This mode allows correction after

finalizing a transaction.

MGR: For manager's entries. The manager can use this mode for an

override entry.

X1/Z1: To take the X/Z report for various daily totals

X2/Z2: To take the X/Z report for periodic (weekly or monthly)

consolidation

Operator display Customer display (Pop-up type)

Amount: Appears in the far-right eight (max.) positions. When the amount is minus, the minus symbol “-”

appears before the amount.

Number of repeats for repetitive registrations:

The number of repeats is displayed, starting at “2” and incremented with each repeat. When you

have registered ten times, the display will show “0.”(2 → 3

.....

9 → 0 → 1 → 2

...

)

Receipt function status:

The indicator “_” appears in the ninth position when the receipt function is in the OFF status.

Time: Appears in the first to fifth positions (using 24-hour format) in the OP X/Z, REG,

or MGR

mode. In the REG,

or MGR mode, press the

key to display the time.

Machine state symbols (appears in the tenth place)

: Appears during programming.

: Appears when an error is detected.

: Appears when the subtotal is displayed or when the amount tendered is smaller than the sale amount.

: Appears when the

key is pressed to calculate a subtotal in foreign currency.

: Appears when a transaction is finalized by pressing the

key.

: Appears when the change due amount is displayed.

: Appears when the voltage of the installed batteries is under the required level. You must replace them

with new ones within two days. Refer to page 37 for details.

: Appears when the batteries are not installed, or the installed batteries are dead. You must replace

them with new ones immediately. Refer to page 37 for details.

PLU

DEPT REPEAT

RCPT

OFF

cashier code

Displays

PGM

X/Z

REG

MGR

1/Z1

X2/Z2

Manager key (MA)

Operator key (OP)

Mode switch and mode keys

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ER-A160 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp ER-A160 Manual

Product: