787905
8
Zoom out
Zoom in
Previous page
1/180
Next page
6
What's in the Box:
E-scooter
User manual
Warranty card
1 × Allen key
4 × Handlebar screws
1 × Charger
1 × Power cord
Location of Parts
Refer to the pictures 1 and 2 on page 1.
1. Front Light
2. Rear Brake Lever
3. Hook/Stem Fold Lock Catch
4. Stem Lock Lever
5. Front Wheel
6. Stand
7. Battery Location
8. Foot Pad
9. Handlebar Lock
10. Rear Light
11. Foot Brake
12. Electric Motor
13. Rear Brake
14. Bell
15. Display
16. Throttle
17. Fold Lock Catch EMKS2A only
Display
Refer to the pictures 3 on page 2.
1. Battery level
2. Lights on
3. Speed Mode
4. Bluetooth mode (for use with app)
5. Speed unit
6. ODO / TRIP mode indicator
7. ODO / TRIP details
8. Power
(this will appear on the display for about 2 seconds after turning on)
9. Speed
10. Light Button
11. Power Button
12. USB Charging Socket
Odo/Trip
Odo will should the total distance covered by the e-scooter; Trip info that
indicates the single driving distance. It is possible to toggle between the
Odo and Trip by short pressing the power-button.
Lights
To turn the front and rear lights on, press the Light Button for a few
seconds. To turn o the lights, press the button for a few seconds.
NOTE: the front and rear lights cannot be controlled independently.
Speed Mode
To change gear, press the light button quickly. The Speed Mode with
Change will go up then down.
Maximum speed in each mode:
Walk Mode - 6km/h
Medium Mode - 20km/h
Maximum Mode - 25km/h
The maximum speed for Maximum Mode is 25 km/h.
Note that these are the maximum speeds which are attainable in each
Speed Mode; the e-scooter will not go faster than these speeds in the
Speed Mode selected.
Speed
Speed units can be changed in the app.
Cruise Control
Your e-scooter is equipped with a cruise control. To enable this, when
you reach the desired speed hold down the thumb throttle control for 9
seconds. A bleep will sound when the cruise control in engaged. To release
the cruise control, engage the handbrake.
Assembling the Handlebars
With reference to pictures 4 and 5 on page 2, assemble the
handlebars with the supplied Allen key. This only has to be carried
out when the product is un-boxed; the handlebars do not have to be
removed after being attached.
Insert the handlebars into the handlebar stem as shown in the pictures.
The handlebars have to be orientated as shown. While assembling the
handlebars, be careful not to bend or break any parts.
Ensure that the screws are not overtightened and that the handlebars
are secure and do not wobble after construction.
Ensure that the brake cable is not bent or damaged.
Unfolding and Folding the e-scooter
How to unfold?
Refer to the pictures 6 on page 3 unfold the e-scooter.
Press down on the rear fender with one hand and use the other to lift up
the Handlebar Stem so that it is straight, refer to picture 6 step 3. When
straight it will not move any further. Once locked, use the Fold Lock Lever
to secure in place. This lever must be as close to the Handlebar Stem as
possible when in the lock position. See picture 6 step 3 and 4.
How to fold?
Refer to the pictures 7 on page 3 fold the e-scooter for storage.
Lift up the Fold Lock Lever as shown in step 1 to release the Handlebar
Stem. Push the Handlebar Stem down as shown in step 2 until it is
touching the Rear Fender. No press down so that it connects with the hook
in the Rear Fender as shown in step 3.
Note that on the EM-KS2A that the Fold Lock Catch is located on
one side of the display and this results in the handlebar stem being
slightly diagonal to the Foot Pad when correctly located.
Using Your e-scooter
Riding
Before riding ensure that it is safe to do so, the e-scooter is being
operated in accordance with this User Manual. It important that safety
equipment is worn and that the scooter is in good condition.
If you are using your e-scooter for the  rst time, practice how to use
it away from public spaces and wear safety equipment. When you are
con dent to use your e-scooter you can operate near to other people
and vehicles.
When riding always follow you countries legal requirements.
Check that the brakes, lights and tyres are working, adjusted correclty
and in good condition before riding.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp EM-KS2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp EM-KS2 in the language / languages: All languages as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info