Manual Sharp EM-KS1 (page 7 of 180) (All languages)

787904

Zoom out

Zoom in

1/180

Removal of Battery

EM-KS1A

• To remove the battery, peel up the rubber foot mat and remove the

6 screws on the wooden deck, then the 10 screws securing the metal

plate. Now unplug the battery connector and remove. Ensure that the

battery terminals are not shorted out. Dispose of the battery as required

by your local regulations.

EM-KS2A

• To remove the battery, peel up the rubber foot mat and remove the 11

retaining screws from the metal plate, the plate can now be taken o

to reveal the battery. Now unplug the battery connector and remove.

Ensure that the battery terminals are not shorted out. Dispose of the

battery as required by your local regulations.

Disposal of this equipment and batteries

• Do not dispose of this product or its batteries as unsorted

municipal waste. Return it to a designated collection point

for the recycling of WEEE in accordance with local law. By

doing so, you will help to conserve resources and protect

the environment.

• Most of the EU countries regulate the disposal of batteries

by law. Recycling symbol appears on electrical equipment,

packaging and batteries to remind users to dispose these

items correctly. Users are requested to use existing return

facilities for used equipment and batteries. Contact your

retailer or local authorities for more information.

CE and UKCA statement:

• Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this

e-scooter is in compliance with the essential requirements and other

relevant provisions of RED Directive 2014/53/EU, UK Radio Equipment

Regulations 2017 and PN-EN 17128: 2021-03

• The full text of the EU declaration of conformity is available by following

the link www.sharpconsumer.com and then entering download section

of your model and choosing “CE Statements”.

Cleaning

• When cleaning your e-scooter, please make sure that it is turned o , the

battery charger has been unplugged, and the charging port cap on the

device is covered.

• It is recommended to use a soft and slightly damp cloth. If there are

stubborn dirt residues that are di cult to clean, use a toothbrush and

repeatedly brush to remove it. After removing the stain, use a soft and

slightly damp cloth with an appropriate amount of detergent to remove

residue.

NOTES:

• Do not use alcohol or other solvents to avoid corrosive chemical products

from damaging the paint on the surface of the body and its internal

structural parts.

• Do not use high-pressure water jets to clean the scooter.

• Clean the e-scooter regularly.

Care and Maintenance

• When not using the e-scooter, please store it in a dry environment to

avoid damage to electronic components due to moisture.

• Do not store the e-scooter outside for an extended period of time. This

will provide excessive exposure to sunlight, high temperature or low

temperature may damage the e-scooter and accelerate the wear of tires

and batteries.

• Do not touch the disc brake disc immediately after using the disc brake

of the electric scooter, as there is a danger of high temperature burns!

• Disc brake adjustment: If the brake is too tight, use the provided hex

wrench to slightly loosen the screw holding the brake cable on the disc

brake to release the brake tension. Then slightly extend the position of

the brake cable bolt compared to the last time. If the brake is too loose,

perform the opposite operation and adjust the brake cable.

• If any damage is found on your e-scooter, do not store indoors due to

potential  re risk.

• Should you experience any issues with the care and maintenance of your

e-scooter, contact your dealer or SHARP Support or advice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp EM-KS1 in the language / languages: All languages as an attachment in your email.

The manual is 2.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp EM-KS1 Manual

Product: