Dubbing Mode
Recording
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
39
You can copy a DVD disc to a
videotape or copy a videotape to a
DVD disc.This function will be pos-
sible only if the DVD disc or the
videotape is not copy protected.
Before starting this function, pre-
pare for the recording on the DVD-
RW/R disc or the videotape. Refer
to pages 31-32, 94.
Make sure:
• Insert a recordable disc and a
videotape with a record tab.
Note for recording to a
videotape:
• The videotape's record tab is
intact.
• The remaining time of the video-
tape is long enough.
Note for recording to a disc:
• Make sure that the disc is
recordable. Refer to pages 27
and 28.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
3
Select “Recording” using K /
L / { / B buttons, then press
ENTER button.
Recording menu will appear.
4
Select “Dubbing Mode” using
K / L buttons, then press
ENTER button.
Option window will appear.
TIMER PROG.
1
2
3
4
Instructions continue on page 40.
Note
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction. Be
advised to playback the video-
tape until the picture is stabi-
lized, then set the starting
point which you wish to start
recording, and start VCR to
DVD duplication.
