21204
22
Zoom out
Zoom in
Previous page
1/126
Next page
22
Basic Connection
Easy Connection
The following connection is the basic connection to watch or record TV programs.
To use a cable box or satellite receiver, see “CATV or Satellite Receiver Connec-
tions” on pages 24 and 25.
Important!
Be sure to turn off and unplug from the AC outlet this Recorder and all
equipment before connecting the cables.
This Recorder is equipped with copy protection technology. The playback
picture from this Recorder will not appear correctly on your TV when you
connect this Recorder to your TV via a VCR (or your VCR via this Recorder)
using video/audio cables.
1
Connect the TV antenna
cable to the IN FROM
ANTENNA jack on the rear
of this Recorder.
2
Connect the PASS
THROUGH jack on the rear
of this Recorder to the
antenna input jack on your
VCR using the supplied
coaxial cable.
NOTE
If you connect this Recorder directly
to your TV, skip the next step.
3
Connect the antenna
output jack on your VCR to
antenna input jack on your
TV using a coaxial cable.
4
Connect the VIDEO/AUDIO
Output jacks on this Re-
corder to the video/audio
input jacks on your TV using
the supplied video/audio
cable.
Be sure that the colors of the
jacks and plugs match up when
connecting the cable.
NOTE
To connect using S-video or
component cables, see “Using
Other Types of Video Output” on
page 23.
5
Connect the video/audio
output jacks on your VCR
to the video/audio input
jacks on your TV using a
video/audio cable.
Important!
•When using this connection, set
“PROGRESSIVE OUT” to
“PROGRESSIVE SCAN OFF” (see
page 102).
After the connection
Plug in the power cords of the TV and
VCR. Then go to “EZ Set Up” (see
page 26).
TV
VCR
To antenna
input jack
To antenna
output jack
To video/audio
input jacks
3
4
The Recorder
To VIDEO/AUDIO
Output jacks
Coaxial cable
(commercially available)
Video/audio
cable
(supplied)
5
Video/audio
cable
(commercially
available)
To video/audio
input jacks
Antenna cable
(commercially available)
To antenna/CATV
wall outlet
1
To IN FROM
ANTENNA
2
Coaxial cable
(supplied)
To antenna
input jack
To PASS
THROUGH
To video/audio
output jacks
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp DVHR300u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DVHR300u in the language / languages: English as an attachment in your email.

The manual is 6,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info