Manual Sharp DR-I470 Pro (page 6 of 76) (English, German, Dutch, French, Italian, Polish, Spanish)

787619

Zoom out

Zoom in

1/76

press the VOL+/- buttons remote control or rotate the Volume Knob

on the top panel to resume.

16. INFO – Press the INFO button to check the station information.

20. EQ – Press the EQ button repeatedly to choose di erent sound  elds:

Normal, Flat, Jazz, Rock, Soundtracks, Classical, Pop, News, My EQ.

21. FAV – Long press the FAV button to save station. Short press the FAV

button to view your favourite stations that have been saved.

22. DIMMER – Press the DIMMER button to select the backlight level

Fitting or replacing the remote control batteries

1. Push the catch on the battery cover in the direction of the embossed

arrow on the rear of the remote.

2. While pushing the catch, open the battery cover.

3. Fit two batteries observing polarity +,- as shown.When replacing the

batteries, use only the same type of battery supplied.

4. Re- t the battery cover and clip it in place.

Starting Up Your Internet Radio

Plug the power adapter into the DC IN Jack. Then “ Welcome” will be

shown on the screen.

Ensure the antenna is extended as far as possible. This will enable you to

get the best signal you can.

After the Welcome screen, if this is the  rst time of using your radio, you

will be able to select the language by scrolling with the Select Knob and

con rm your selection by pressing down the OK button.

After language setting, the screen will display “Enable Check Network

when Power On?”. You can choose “YES” or “ NO” to decide whether the

unit check network when power on or not.

Manual WIFI Set-up

After the above setting, the screen will show ”Would you like to con gure

Network now?”.

• If you select “YES”, your radio will begin to scan for nearby networks to

connect to .After scanning, you need to choose the network you want to

connect .Then type letters/numbers by scrolling with the Select Knob

or pressing the NUMBER/LETTER buttons until the correct digit is dis-

played and click the RIGHT button to go to the next digit. Once  nished,

press down the OK button to con rm.

• If you select “NO” then you can set this up later in con guration settings.

Wireless Network (WPS PBC)

When at the “Would you like to con gure network now?” stage, if you

select “YES(WPS)” your radio will begin to search for WiFi connections.

While this has been selected, you will have 120 seconds to click the WPS

button on your WiFi modem. This will connect your WiFi to your radio

without manually writing in the passcode.

WIFI Connection Complete!

Once your WIFI is completed by manually entering your WIFI password pr

via WPS, you will be taken to the main menu screen and the WIFI signal will

appear in white at the top left. Your internet radio is now set up!

Con guration

Use the LEFT/RIGHT buttons or rotate the Select Knob to choose

<Con guration> on the main menu display screen, press down the OK

button to enter the con guration settings.

Time Display

Set the time display type: Analog or Digital.

Manage my mediaU

Set the function to Enable or Disable.

MediaU QR code is available in Con guration > Manage my mediaU > Enable.

Network

• Wireless Network Con guration

• On the Network settings, you can set up a WIFI connection by

selecting Wireless Network Con guration. The radio will then start

searching for available WIFI connections.

• Find your WIFI connection and select it with OK button. To type

letters/numbers, use the Select Knob or press the LETTER/NUMBER

buttons until the correct digit is displayed. Then press the RIGHT

button to go to the next digit. Press LEFT button if you want to go

back to the previous digit. Once  nished, press down the OK button

to con rm.

• Once your WIFI is connected, the main menu screen will show and the

WIFI signal will appear in white at the top left corner.

• Wireless Network (WPS PBC)

• Select this option to search for the WIFI connection. Whilst this has

been selected you will have 120 seconds to click the WPS button on

your WIFI modem. This will connect your WIFI to your radio without

manually writing in the passcode.

• Manual Con guration

• You can manually set the wireless data: DHCP, Enter SSID and Manage.

• Check Network when Power On

• Set it Enable or Disable.

Date & Time

• Set Date and Time

• Manual Setup or Auto Detect

There is the option to manually set the time and date instead of using

auto-detect to set this up. Rotate the Select Knob or press the digit

buttons to input your desired digit of the month. Once you have

got the correct digit, click RIGHT button to go to the day setting.

Continues this process with the year, the hour and the minutes. Once

the manual set up is complete, press down the OK button to enter. To

cancel the format of the date and time, you can alter these settings

under the “Date & Time” function.

• Set Time Format: To set the time format, 12Hour or 24 Hour.

• Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY

Alarm

• Setting Alarm 1/ Alarm 2

• To set an alarm on your radio, go to “Con guration” settings and

scroll through to select “Alarm” or click ALARM button on the remote

directly.

• After entering the Alarm setting screen, select “Alarm 1(Turn Oﬀ )” or

“ Alarm 2(Turn Oﬀ )” and choose “Turn On” to activate the alarm.

• Select “Repeat” to choose the regularity of your alarm by pressing

down the OK button. You can choose between Everyday, Once or

select individual days for the alarm to sound. Once you have made

your selection, press the LEFT button to go back to the other alarm

settings.

• Select “Time” and turn the Select Knob to highlight the alarm hour.

Once you have found the desired hours, press RIGHT button to

change the minutes.

• Once the minutes are at the correct value, press RIGHT button to

change “AM” or “PM”,then press the OK button to con rm and go

back to alarm settings.

• Now scroll down and select “Sound” by pressing OK button. You can

now choose between Beep, melody, Internet Radio, FM, or DAB/DAB+.

• If you are setting your alarm sound as Internet Radio, FM or DAB/DAB+

then you will now be taken through your preset favourite stations.

Select your chosen alarm station by pressing down the OK button.

• The alarm symbol will show on the main display screen.

• How to cancel your alarm

• To cancel your alarm, select “Alarm” in Con guration settings or with

the ALARM button and select the alarm you wish to turn o .

• Once the alarm is selected, you will have the option to turn o or on.

Highlight the “Turn Oﬀ option and press the OK button to con rm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DR-I470 Pro in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp DR-I470 Pro Manual

Product: