67539
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
DK-A10H
DK-A10H(BK)
Advanced Features
Alarm and sleep operation
Alarm
The unit turns on and play desired source (iPod, CD, TUNER, AUX)
or Buzzer sound for 30 minutes.
Before setting the alarm:
Setting the alarm content
Notes:
If steps 1 - 6 above are done using the remote control, press the
ALARM ON/OFF button on main unit to activate the alarm.
To switch off illumination and display in demonstration mode,
press the E SOUND/DEMO button.
Changing alarm source only
Activating and deactivating the alarm
Checking the alarm setting
Press the ALARM button.
The selected source or buzzer type will blink.
The unit will display the alarm time for 3 seconds.
During stand-by mode, the display will remain for 6 seconds.
Example: The time is 10:00 AM and iPod function is selected.
Notes:
Buzzer sound will be output from right speaker only.
Alarm will not activate during power on mode.
When iPod is selected in step 2, if iPod unit is not detected during
alarm activation, source will automatically change to BUZZER 1.
When CD is selected in step 2, if disc is not detected during
alarm activation, source will automatically change to BUZZER 1.
When performing alarm using another unit connected to AUX,
select AUX in step 2. The unit will turn on and enter the clock
function automatically, however, the connected unit to AUX will
not turn on or off.
When the entire preset memory is erased (page 24), source will
automatically change to BUZZER 1 even if TUNER is pre-selected
(step 2).
1 Check that the clock is set to the correct time (refer page 13).
If it is not set, you cannot use the alarm function.
2 For iPod playback: Insert iPod to the unit (refer page 15).
3 For TUNER: Set preset memory (refer page 24).
4 For CD playback: Insert disc to the unit (refer page 18).
1 Press and hold the ALARM button for more than 2 seconds.
2
Press the or button to select source or buzzer.
Press the ALARM button.
3 If TUNER is selected, press the or button to select a
preset station. Press the ALARM button.
4
Press the or button to adjust the hour.
Press the ALARM button.
5
Press the or button to adjust the minute.
Press the ALARM button.
6
If other than BUZZER is selected in step 2, press the or
or VOL (+ or –) button to select volume.
Press the ALARM button.
After source is selected in step 2, press and hold the ALARM button.
If TUNER is selected, press and hold the ALARM button after preset
station is selected in step 3.
The time and volume will be automatically set to the previous setting.
Press the ALARM ON/OFF button on main unit to activate and deac-
tivate the alarm function. When activated:
During power on, “ALARM” will appear.
During stand-by mode, ALARM indicator will light up.
Switching off the sound and display
To turn off the sound and display, press either CLOCK button,
ON/ STAND-BY button or E SOUND/DEMO button.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp DK-A10H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DK-A10H in the language / languages: English as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info