787901
12
Zoom out
Zoom in
Previous page
1/68
Next page
11
Description of the Aroma Diuser
(Refer to the 1 Main Parts of Your Aroma Diuser on page 1).
Your Aroma Diuser consists of the following parts:
1. Power Cable
2. AC Adaptor
3. Power input
4. Lid
5. Water Cup
6. Maximum mark
7. Ultrasonic Membrane
8. On/O button
9. Light control button
10. Air outlet opening (When lling make sure that no water
enters this opening)
11. Fan
Controls
On/O button (item 8)
To turn the unit on and o use the button this is located on
the side of the unit and requires a simple push to turn on. When
the button is pressed it will click. Press once to turn on, press
again to turn o.
Light button (item 9)
It is possible to control the intensity of the light by pressing the
light button. This button operates as below if the light is on.
1. Press once – light dims.
2. Press again – light turns o.
3. Press again – light turns on at maximum level.
4. Pressing the button repeats 1 to 3 as above.
Top tips and hints
For trouble free use of your SHARP Aroma Diuser, follow
the advice in this user manual and the bullet points below:
DO NOT block the fan grill as this will cause the mist not to be
emitted correctly.
Fill the cup to the maximum water level prior to use and
when being used with the Auto Restart function.
Make sure that the lid is always tted correctly.
Using your new Aroma Diuser
Before lling your Aroma Diuser with water, either turn o via
the button on the front or disconnect from the mains supply.
Fill the water cup to the maximum mark indicated. Do you not
exceed the maximum mark as this will cause the Aroma diuser
not to operate correctly and cause spillage of water.
This Aroma Diuser is designed to be used with clean water,
ideally this should be distilled water or if this is not available
you can use clean tap water. Once the cup has been lled to the
maximum level essential oils can be added to the water. Be sure
to follow the essential oil instructions to ensure that the correct
amount is used.
(Refer to the 2 Water Level Mark on page 1).
Replace the lid, ensuring that it is correctly aligned and tting
snugly into the base of the unit. If the lid is not installed
correctly there will be a gap between it and the base which will
allow water to drip down the side of the unit. If the lid does not
t correctly rotate and try again.
(Refer to the 3 Correct Fitment of Lid on page 1).
Once the lid has been correctly tted, it is possible to turn
on the unit. To do this press the on o button located on
the side. The unit will power up and the LED will be at full
brightness.
Connecting power to your Aroma Diuser
Your new SHARP of Aroma Diuser works with an external AC
adapter. It is important that this AC adapter is kept away from
any water and is not operated or touched if your hands are wet.
Your AC Adaptor plugs into the mains supply and then is
connected to the Aroma Diuser via the power cable, This
lead has moulded connectors on each end; the USB connector
plugs into the AC Adaptor; the round plug ts into the Aroma
Diuser.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp DF-A1E-W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp DF-A1E-W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 4.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info