49795
8
Zoom out
Zoom in
Previous page
1/136
Next page
8
Before using your camcorder, you first need to
charge and install the battery pack. To charge the
battery pack, use the supplied AC power
adaptor.
This camcorder operates with the
“InfoLITHIUM” battery labeled
such as NP-F530/F730. If you use any other
battery to operate your camcorder, the camcorder
may not operate or the battery life may be
shortened.
“InfoLITHIUM” is a trademark of Sony
Corporation.
Charging the battery pack
Charge the battery pack on a flat surface without
vibration.
(1)Connect the mains lead to mains.
(2)Align the surface of the battery pack indicated
by the z mark with the edge of the terminal
shutter of the AC power adaptor. Then fit and
slide the battery pack in the direction of the
arrow. The CHARGE lamp (orange) lights up.
Charging begins.
When charging is completed, the CHARGE lamp
goes out. If the battery pack is used right after the
CHARGE lamp goes out, it will last for a normal
period (normal charge). If allowed to charge for
an additional hour or so, the battery pack will
last for a longer period (full charge). Unplug the
unit from the mains, then remove the battery
pack and install it into the camcorder. You can
also use the battery pack before it is completely
charged.
Getting started Подготовка к эксплуатации
Зарядка и установка
батарейного блока
Charging and installing
the battery pack
Перед использованием Вашей видеокамеры
Вам нужно сперва зарядить и установить
батарейный блок. Для зарядки батарейного
блока используйте прилагаемый сетевой
адаптер переменного тока.
Данная видеокамера функционирует с
батарейным блоком “InfoLITHIUM”, имеющим
знак , как, например, модель NP-
F530/F730. Если Вы испульзуете какой-либо
другой батарейный блок для эксплуатации
Вашей видеокамеры, она может не работать,
либо срок службы батарейного блока будет
коротким.
“InfoLITHIUM” является товарным знаком
корпорации Sony.
Зарядка батарейного блока
Заряжайте батарейный блок на ровной
поверхности без вибрации.
(1)Подсоедините сетевой провод к
электрической сети.
(2)Совместите поверхность батарейного
блока, отмеченную знаком z, с краем
входной задвижки сетевого адаптера
перем. тока. Затем согласуйте и двигайте
батарейный блок в направлении стрелки.
Лампочка CHARGE (оранжевая) будет
гореть. Зарядка началась.
Когда зарядка будет завершена, лампочка
CHARGE погаснет. Если батарейный блок
используется сразу после того, как погаснет
лампочка CHARGE, то его хватит на
нормальный период ( нормальная зарядка ).
Если Вы продолжите зарядку в течение
дополнительного часа или около того,
батарейного блока хватит на более длинный
период (полная зарядка).
Отсоедините аппарат от электрической сети.
а затем снимите батарейный блок и
установите его на видеокамеру. Вы также
можете использовать батарейный блок до
того, как он полностью зарядится.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp CCD-TR2300E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp CCD-TR2300E in the language / languages: English as an attachment in your email.

The manual is 2,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info