Manual Sharp AY-XP13CE (page 22 of 183) (English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish)

515960

Zoom out

Zoom in

1/183

IF THE UNIT FAILS TO RECEIVE THE REMOTE CONTROL SIGNAL

Check whether the remote con-

trol batteries have become old

and weak.

Try to send the signal again with

the remote control pointed prop-

erly towards the unit’s signal re-

ceiver window.

Check whether the remote con-

trol batteries are installed with

the polarities properly aligned.

E-20

BEFORE CALLING FOR SERVICE

The following conditions do not denote equipment malfunctions

UNIT DOES NOT OPERATE

The unit will not operate if it is turned on immediately

after it is turned off. The unit will not operate

immediately after the mode is changed. This is to

protect the internal mechanisms. Wait 3 minutes

before operating the unit.

UNIT DOES NOT SEND OUT WARM AIR

The unit is preheating or de-icing.

CRACKING NOISE

The unit may produce a cracking noise. This sound is

generated by the friction of the front panel and other

components expanding or connecting due to a

temperature change.

If the unit appears to be malfunctioning, check the following points before calling for

service.

IF THE UNIT FAILS TO OPERATE

Check to see if the circuit breaker has tripped or the fuse has blown.

IF THE UNIT FAILS TO COOL (OR HEAT) THE ROOM EFFECTIVELY

Check the filters. If dirty, clean

them.

Check the outdoor unit to make

sure nothing is blocking the air in-

let or outlet.

Check the thermostat is proper

setting.

Make sure windows and doors

are closed tightly.

A large number of people in the

room can prevent the unit from

achieving the desired tempera-

ture.

Check whether any heat-gen-

erating appliances are operat-

ing in the room.

ODORS

Carpet and furniture odors that entered into the unit

and the air conditioner's inner component odors at

the early stage of installation may be sent out from

the unit.

Please call for service when OPERATION Lamp, TIMER Lamp and TEMPERATURE INDICATOR

on the indicator panel blink.

A LOW BUZZ NOISE EMITTED

This is a sound emitted when the unit is generating ion

clusters.

SWISHING NOISE

The soft, swishing noise is the sound of the

refrigerant flowing inside the unit.

WATER VAPOUR

• In the COOL and DRY operation, water va-

pour can sometimes be seen at the air outlet

due to the difference between the room air

temperature and the air discharged by the

unit.

• In the HEAT operation, water vapour may

flow out of the outdoor unit during de-icing.

THE OUTDOOR UNIT DOES NOT

STOP

After stopping the operation, the outdoor unit

will rotate its' fan for about a minute to cool

down the unit.

ODOR EMITTED FROM THE

PLASMACLUSTER AIR OUTLET

This is the smell of ozone generated from the

ionizer. Density of the ozone is very little, hav-

ing no adverse effect over your health. The

ozone released into the air will decompose soon,

and its density in the room will not increase.

During PLASMACLUSTER AUTO OPERATION, the air conditioner operates in the REFRESHING OP-

ERATION even when there is odor in the room.

• In case for example, when the room is full of tobacco smokes before the air conditioner is turned on, the

ODOR SENSOR may become unreactive.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AY-XP13CE in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 6,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp AY-XP13CE

Sharp AY-XP13CE User Manual - Dutch - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp AY-XP13CE Manual

Product: