26439

Sharp ARM277 Manual

12
Zoom out
Zoom in
Previous page
1/263
Next page
10
BEFORE USING THE MACHINE
OPERATION PANEL
Touch panel
The machine status, messages and touch keys are
displayed on the panel. The display will show the
status of printing, copying or network scanning
according to the mode that is selected. For details
see the next page.
Mode select keys and indicators
Use to change modes and the corresponding
display on the touch panel.
[COPY] key
Press to select copy mode.
[PRINT] key/ONLINE indicator/
DATA indicator
Press to select print mode.
•
ONLINE indicator
Print jobs can be received when this indicator is lit.
•
DATA indicator
A print job is in memory. The indicator lights
steadily while the job is held in memory, and
blinks while the job is printed.
[SCAN] key/DATA indicator (When the
network scanner option is installed.)
Press to select network scan mode when the
network scanner option is installed.
•
DATA indicator
Lights steadily or blinks while a scanned image
is being sent.
(See "Operation manual (for network
scanner)".)
[FAX] key/LINE indicator/DATA indicator
(When the fax option is installed.)
Press to select fax mode when the fax option is
installed.
•
LINE indicator
this lights up while faxes are being sent or
received.
•
DATA indicator
Blinks when a fax has been received to
memory and lights steadily when a fax is
waiting in memory for transmission.
(See operation manual for facsimile.)
[JOB STATUS] key
Press to display the current job status. (p.12)
[CUSTOM SETTINGS] key
Use to adjust various settings of the machine
including the contrast of the touch panel and key
operator programs. (p.52)
Numeric keys
Use to enter numeric values for various settings.
[ACC.#-C] key ( )
When auditing mode is enabled, press this key
after finishing a job to return the machine to
account number entry standby.
[#/P] key ( )
Use this key to execute a job program in copy
mode.
The key is also used to dial in fax mode.
[CLEAR] key ( )
Press to clear a copy number setting or cancel a
job.
[START] key ( )
Press in copy mode, scanner mode, or fax mode to
begin copying, network scanning, or faxing.
This key blinks when auto power shut mode has
activated. Press the key to return to normal
operation.
[INTERRUPT] key ( )
Use to perform an interrupt copy job. (p.34)
[CLEAR ALL] key ( )
Resets the settings to the initial settings.
ACC.#-C
COPY
PRINT
SCAN
FAX
ON LINE
DATA
DATA
DATA
LINE
JOB STATUS
CUSTOM SETTINGS
9
10 11
2 3 4 5 6 7 8
1
1
2
3
4
5
6
7
8
9
10
11
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM277 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info