26408

Sharp ARM237 Manual

221
Zoom out
Zoom in
Previous page
1/263
Next page
103
KEY OPERATOR PROGRAMS
8
F-CODE MEMORY BOX
This program is used to program memory boxes for
F-code communication. Three types of memory boxes
can be programmed: F-code memory polling boxes,
F-code confidential boxes, and F-code relay broadcast
boxes. Follow the procedure below to program, edit, or
delete a memory box.
A box name, sub-address, password, and specific
functions are programmed in a memory box.
1
Touch the desired type of memory box
([POLLING MEMORY], [CONFIDENTIAL],
or [RELAY BROADCAST]) in the upper row
of keys.
(The following uses [POLLING MEMORY] as an example.)
The F-code memory box programming screen appears.
2
Touch the [BOX NAME] key.
• The lowest box number that has not yet been
programmed will automatically appear in "No.".
• The character entry screen appears. Enter a name for
the box (maximum of 36 characters).
• To enter characters, see "ENTERING
CHARACTERS" on page 80.
3
Touch the [OK] key.
4
Touch the [SUB ADDRESS] key.
The sub-address/passcode entry screen appears.
5
Use the numeric keys to enter a
sub-address (maximum of 20 digits).
• The characters and # cannot be used in a
sub-address.
• If you make a mistake, press the [CLEAR] key ( )
and then enter the correct number.
• If you do not wish to enter a passcode after entering
the sub-address, go directly to step 8.
6
To enter a passcode, touch the [PASS
CODE] key.
A slash (/) appears after the sub-address.
If you make a mistake, press the [CLEAR] key ( ) and
then enter the correct number.
7
Use the numeric keys to enter a passcode
(maximum of 20 digits).
• Numbers and " " and "#" can be used in a
passcode.
• If you make a mistake, press the [CLEAR] key ( )
and then enter the correct number.
8
Touch the [OK] key.
You will return to the memory box programming screen.
The entered sub-address and passcode will appear.
"REGISTRATION IS COMPLETED." will appear next to
the box "No.".
9
Touch the [NEXT] key or the [EXIT] key.
• To program another memory box, touch the [NEXT]
key.
• To exit, touch the [EXIT] key.
Next, program specific functions of the memory
box as indicated below:
• F-code confidential box (print passcode: page 104)
• F-code relay broadcast box
(end receiving machines: page 104)
Programming an F-code memory box
•
When programming a memory box, the
same sub-address as a previously
programmed memory box cannot be used.
However, the same passcode can be used.
•
A passcode can be omitted.
•
Up to 10 F-code memory boxes can be
programmed. If you attempt to program a
memory box when 10 boxes have already
been programmed, a warning message will
appear and programming will not be
possible. Delete any unneeded F-code
memory boxes (p.105) and then program
the new box.
Note
POLLING MEMORY CONFIDENTIAL
RELAY
BROADCAST
POLLING MEMORY CONFIDENTIAL
KEY OPERATOR PROGRAMS
F-CODE MEMORY BOX
OK
STORE
AMEND/DELETE
RELAY
BROADCAST
… 221 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM237 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM237 in the language / languages: English as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info