26404
369
Zoom out
Zoom in
Previous page
1/372
Next page
43
3
CHECKING THE IP ADDRESS
There are several settings where the IP address must be entered or checked.
To check the IP address of the machine, hold down the status button on the network expansion kit for at least 2
seconds to print out a Printer Setting List.
HARDWARE AND SOFTWARE
REQUIREMENTS
Before installing the software from the CD-ROM that is provided standard with the machine or the CD-ROM that is
provided with the optional network expansion kit (AR-NB3), make sure that your computer satisfies the following
requirements.
*1 Printing is not available in MS-DOS mode.
*2 If you are installing the Printer Administration Utility in Windows 95, a system file must be updated before the utility can be
installed. For more information, click the "Display Readme" button in the Software Selection window of the installer.
*3 USB is not supported.
*4 Administrator's rights are required to install the software.
*5 The MFP driver, Button Manager, and other software on the "Software CD-ROM (1)" that is provided standard with the
machine are not supported.
*6 The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 (Hi-Speed) standard only if the Microsoft
USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP that Microsoft
provides through "Windows Update" is installed.
*7 Compatible with models preinstalled with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional
or Windows XP Home Edition, Windows Server 2003, and which are equipped standard with a USB interface.
HOW TO RESET THE NETWORK EXPANSION KIT
To reset the network expansion kit, power on the machine while holding down the status button on the network
expansion kit.
After the network expansion kit is reset, network scanner destination information and scan settings will remain,
however, the network settings and network printer settings will revert to the factory default settings.
Windows (standard
machine system)
Windows (options) Macintosh (options)
Operating system*
1
Windows 95*
2,3
, Windows 98, Windows Me,
Windows NT Workstation 4.0 (Service Pack 5 or later)*
3,4
,
Windows 2000 Professional*
4
, Windows XP Professional*
4
,
Windows XP Home Edition*
4
, Windows 2000 Server*
5,
Windows Server 2003*
5
Mac OS 8.6 to 9.2.2,
10.1.5, 10.2 to 10.2.8
(excluding 10.2.2),
10.3 to 10.3.4
Computer type IBM PC/AT compatible computer
An environment on
which any of the
operating systems
listed above can fully
operate
Equipped standard with a
USB 2.0*
6
/1.1*
7
port or a
bi-directional parallel port
(IEEE1284 compliant).
Equipped with a
10Base-T/100Base-TX LAN
board
Display 800 x 600 dots (SVGA), 256 colors (or higher)
Hard disk free space 150 MB or more
Other hardware
requirements
An environment that allows any of the above operating systems to fully operate
Status button
Caution
369


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM207 in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ARM207

Sharp ARM207 User Manual - Dutch - 101 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info