26406
46
Zoom out
Zoom in
Previous page
1/96
Next page
44
CUSTOMIZING SETTINGS
(User programs)
The user programs allow you to customize the machine to match your needs.
USER PROGRAMS
Program
number
Program name
Setting codes
(factory default setting
appears in bold)
Explanation
1
Auto clear time
1: OFF
2: 10 sec.
3: 20 sec.
4: 60 sec.
5: 90 sec.
6: 120 sec.
"Auto clear time" automatically returns the copy
settings to the initial settings (p.12) when a
certain period of time elapses after a copy is
made. This program is used to select the period
of time. "Auto clear time" can also be disabled.
2
Preheat mode
1: 1 min.
2: 5 min.
3: 30 min.
4: 60 min.
5: 120 min.
6: 240 min.
This function automatically switches the
machine to a low power consumption state if
the set duration of time elapses without the
machine being used when the power is on. The
POWER SAVE indicator lights up, however, the
keys on the operation panel can be used.
Normal operation automatically resumes when
a key on the operation panel is pressed, an
original is placed, a print job is received, or
scanning is begun from a computer.
3
Auto power shut-off
timer
1: 5 min.
2: 30 min.
3: 60 min.
4: 120 min.
5: 240 min.
This function automatically switches the
machine to a state that consumes even less
power than preheat mode if the set duration of
time elapses without the machine being used
when the power is on. All lights except the
POWER SAVE indicator and ON LINE indicator
go off. To resume normal operation, press the
[START] key ( ). Normal operation also
resumes automatically when a print job is
received or scanning is begun from a computer.
While in auto power shut-off mode, no keys
(except the [START] key ( )) can be used.
4
Stream feeding mode
*1
0: OFF
1: ON
When copying using the SPF/RSPF, during the
period of time that the SPF/RSPF indicator
blinks after an original has been scanned
(about 5 seconds), a subsequent original can
be placed and automatically fed into the
machine.
5
Auto power shut-off
setting
0: OFF
1: ON
Use this setting to enable or disable auto power
shut-off.
6
Border line for 2 IN 1 / 4
IN 1
*2
1: OFF
2: Solid line
3: Broken line
When copying multiple originals onto a single
sheet of paper (2 IN 1 / 4 IN 1 copy), this
function can be used to print a solid or broken
borderline around each original image.
*
1
On models with a SPF/RSPF.
*
2
On models with a dual function board.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM205 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ARM205

Sharp ARM205 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info