26406
38
Zoom out
Zoom in
Previous page
1/96
Next page
36
CREATING MARGINS WHEN COPYING
(Margin shift)
The MARGIN SHIFT feature, in its initial setting, automatically shifts the text or image to increase the margin by
approximately 1/2".
The location of the margin to be increased can be select to be either at the left edge or the top of the page (AR-M205
only).
1
Place the original(s).
If you are using the
document glass, place
the side of the original
where you wish to create
the margin on the right.
If you are using the
SPF/RSPF, place the
side of the original where
you wish to create the
margin on the left.
2
If the original is placed on the document
glass, select the original size. (p.18)
When using the SPF/RSPF, make sure that the
same ORIGINAL SIZE indicator as your original
size lights up.
3
Press the [MARGIN SHIFT] key.
The MARGIN SHIFT
indicator lights up.
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The copy is delivered to the paper output tray.
Select the location of the margin
(AR-M205 only)
Follow this step if you are using a model that supports
automatic two-sided copying. On other models, skip to
the next step.
1
Hold down the [MARGIN SHIFT] key until
the MARGIN SHIFT indicator blinks.
The currently selected setting code for the margin
position blinks in the display.
1: Left edge 2: Top edge
2
Press the [1] key or the [2] key, and then
press the [START] key ( ).
The selected setting code for the margin position
blinks.
3
Press the [MARGIN SHIFT] key.
The MARGIN SHIFT indicator stops blinking.
A
A
A
Margin
Margin
Original
Left edge Top edge
Example: Model
that supports automatic two-sided copying
This feature cannot be used with the 2 IN 1 / 4 IN 1 or rotation copy feature.
This feature cannot be used with non-standard size copy paper. (p.13)
You can also switch between the left margin and the top margin in the user programs. (p.45)
The margin width can be changed in the user programs. (p.45)
Note that a margin is created by shifting the image, and thus if the image is shifted too far, the edge of the image
may be cut off.
If the ORIGINAL SIZE indicator blinks when margin shift is selected, rotate the original so that it is in the same
orientation as the blinking ORIGINAL SIZE indicator.
Note
1
MARGIN
SHIFT
To cancel margin shift, press the [MARGIN
SHIFT] key repeatedly until the MARGIN
SHIFT indicator is off.
When margin shift is used in combination
with automatic two-sided copying, a margin
is also created automatically on the back
side of the paper directly behind the margin
on the front side.
Note
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM205 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ARM205

Sharp ARM205 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info