26406

Sharp ARM205 Manual

35
Zoom out
Zoom in
Previous page
1/96
Next page
33
CONVENIENT COPY FUNCTIONS
3
Using the document glass
1
Place the first original. (p.18)
2
Select the original size. (p.18)
If the original size is not selected, 11" x 17" is
automatically used.
3
Press the [SORT/GROUP] key to
select the desired mode.
The modes are selected
in the order "SORT",
"GROUP", "Off".
4
Set the number of copies and other
settings, and then press the [START]
key ( ).
The ORIGINAL DATA indicator blinks, and the
original is scanned into memory.
5
When the start indicator lights,
replace the original with the next
original, and then press the [START]
key ( ).
Repeat step 5 until all originals have been
scanned into memory.
6
When all originals have been
scanned, and then press the
[READ-END] key ( ).
The copies are delivered to the paper output tray.
Using the SPF/RSPF
1
Place the originals. (p.19)
2
Press the [SORT/GROUP] key to
select the desired mode.
The modes are selected
in the order "SORT",
"GROUP", "Off".
3
Set the number of copies and other
settings, and then press the [START]
key ( ).
The copies are delivered to the paper output tray.
If the memory becomes full
• If the memory becomes full while scanning the
originals, the ORIGINAL DATA indicator will
blink, "FUL" will appear in the display, and the
machine will stop copying. In this state, the
paper tray cannot be changed.
• To copy the originals that have been scanned up
to that point, press the
[START] key ( )
.
• To clear the data that has been scanned into
memory, press the [CLEAR ALL] key ( ) or the
[CLEAR] key ( ).
If the paper output tray becomes full
When the maximum number of pages that can be
held in the paper output tray (250) are output,
copying will temporarily stop. When this happens,
promptly remove the copies and press the [START]
key ( ) to resume copying.
Offset function during Sort/Group copy
The offset function shifts the position of each set or group
of copies in the paper output tray for easy separation.
The offset function setting can be changed in the user
programs. (p.45)
To clear the data in memory, press the
[CLEAR ALL] key ( ) or the [CLEAR] key
()
.
• To cancel the Sort/Group copy job, press
the [CLEAR] key
()
.
• To cancel Sort or Group mode, press the
[SORT/GROUP] key repeatedly until the
SORT/GROUP indicators are both off.
SORT
GROUP
Note
Note
• To cancel the Sort/Group copy job, press
the [CLEAR] key
()
.
• To cancel Sort or Group mode, press the
[SORT/GROUP] key repeatedly until the
SORT/GROUP indicators are both off.
SORT
GROUP
Note
1
1
1
2
1
2
3
1
1
1
2
3
Offset function
When offset function is disabled
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM205 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ARM205

Sharp ARM205 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info