26398
15
Zoom out
Zoom in
Previous page
1/372
Next page
13
BEFORE USING THE PRODUCT
1
(15) Document cover (when installed)
Open to make a copy from the document glass.
(16) Side cover
Open to remove misfed paper.
(17) Side cover handle
Pull to open the side cover.
(18) Bypass tray guides
Adjust to the width of the paper when using the
bypass tray.
(19) Bypass tray
Special paper (heavy paper or transparency film)
can be fed from the bypass tray.
(20) Bypass tray extension
Pull out when feeding large paper such as 11" x
17" and 8-1/2" x 14" (A3 and B4).
(21) Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.
(22) Toner cartridge
Contains toner.
(23) Document feeder tray (when the SPF is
installed)
Place the original(s) that you wish to scan face up
here. Up to 40 sheets can be placed.
(24) Original guides (when the SPF is installed)
Adjust to the size of the originals.
(25) Feeding roller cover (when the SPF is
installed)
Open to remove misfed originals.
(26) Right side cover (when the SPF is installed)
Open to remove misfed originals.
(27) Fusing unit release levers
To remove the paper misfed in the fusing unit,
push down on these levers and remove the
paper.
(28) Roller rotating knob
Rotate to remove misfed paper.
(29) Exit area (when the SPF is installed)
Originals exit the machine here after
copying/scanning when the SPF is used.
(30) Reversing tray (when the RSPF is installed)
Pull out to remove misfed originals.
(31) Photoconductive drum
Images are formed on the photoconductive drum.
(32) Fusing unit paper guide
Open to remove misfed paper.
(27)(28)
(22)
(21)
(23) (24) (25)
(26)
(31) (32)
(29) (30)
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
The model name is on the front cover of the
machine.
Warning
Caution
Note
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM162 in the language / languages: English as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info