26400
63
Zoom out
Zoom in
Previous page
1/96
Next page
61
TROUBLESHOOTING
6
Notice page printed
If you find that a notice page has been printed at the end of a print job, the print data received from the computer has
not been printed as specified. Fix the problem as explained below and then try printing again.
What to do when a notice page is printed, 1
The above notice page is printed if you attempt to print
using the print driver for the dual function board when
the dual function board is not installed. Change to the
standard print driver and print again. If the standard
print driver is not installed, install as explained in the
Software Setup Guide.
What to do when a notice page is printed, 2
The above notice page is printed when a print job
containing more data than can be held in the memory
of the dual function board is sent to the machine. To fix
the problem, disable the ROPM function. If you need to
use the ROPM function, set the print quality in the
printer driver to "Draft", or increase the amount of
memory on the dual function board.
Removing the software
If you need to remove the software, follow these steps.
1
Click the "start" button, and then click
"Control Panel".
On Windows 95/98/Me/NT 4.0/2000, click the
"Start" button, select "Settings", and then click
"Control Panel".
2
Click "Add or Remove Programs".
On Windows 95/98/Me/NT 4.0/2000, double-click
the "Add/Remove Programs" icon.
3
Select the printer/scanner driver for
the machine and Button Manager from
the list, and remove the software.
For more information, refer to your operating
manual or to the help files for your operating
system.
****************************************************
Notice Page
****************************************************
The incorrect driver is chosen, a normal
output was not able to be excuted.
Please install the appropriate driver.
Please refer to the operation manual for
the solution method.
The IMC memory is used to temporarily hold
print data when the ROPM function is used.
This memory is also used to temporarily hold
the original image during copying. The
proportion of IMC memory allocated to the
printer function can be changed in the user
programs of copy mode. See the user
program "Memory allocated to printer mode".
(p.46) It is also possible to expand memory by
adding on a commercially available memory
module. For more information on expansion
memory, contact a SHARP service center.
****************************************************
Notice Page
****************************************************
The IMC memory full error had occurred,
a normal output was not able to be executed.
Please refer to the operation manual for
the solution method.
Note
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp ARM160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp ARM160 in the language / languages: English as an attachment in your email.

The manual is 3,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp ARM160

Sharp ARM160 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info