17533
40
Zoom out
Zoom in
Previous page
1/84
Next page
38
GENERAL INFORMATION
USER PROGRAMS
4
Select the desired parameter using the numeric keys.
The entered parameter number will blink on the right side of the copy
quantity display.
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
5
Press the START ( ) key.
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
6
To continue with other user programs, press the key
and then repeat steps 2 to 5. To exit the user program
mode, press the light ( ) key.
All the alarm indicators will go out.
User programs
Program name Parameters
Auto clear time 0 OFF 1 30 sec. * 2 60 sec. 3 90 sec. 4 120 sec.
5 10 sec.
Preheat mode** 0 OFF ** 1 30 sec. 2 60 sec. * 3 90 sec. 4 120 sec.
Auto power shut-off timer * 1 30 min. 2 60 min. 3 90 min. 4 120 min. 5 240 min.
Stream feeding mode * 0 OFF 1 ON
Auto power shut-off setting 0 OFF * 1 ON
Border line for 2 in 1 or 4 in 1 * 0 OFF 1 ON
Rotation copy 0 OFF * 1 ON
Auto paper select mode 0 OFF * 1 ON
Auto tray switching 0 OFF * 1 ON
Erase width adjustment 0 0 mm 1 5 mm * 2 10 mm 3 15 mm 4 20 mm
( 0 0" 1 1/4" * 2 1/2" 3 3/4" 4 1")
Layout in 2 in 1 copy * 1 Pattern 1 2 Pattern 2
Layout in 4 in 1 copy * 1 Pattern 1 2 Pattern 2 3 Pattern 3 4 Pattern 4
Offset of paper output tray 0 Upper OFF, lower OFF * 1 Upper ON, lower ON
2 Upper ON, lower OFF 3 Upper OFF, lower ON
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 63.
**In European countries, the default setting of the preheat mode is 1 ( 30 sec.). For other programs, factory default settings
in these countries are same to those shown above with an asterisk (*).
If you select “0” (OFF) in a program, the corresponding
function will be disabled.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp AR201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AR201 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info