17521
36
Zoom out
Zoom in
Previous page
1/52
Next page
34
5
Copier trouble?
STATUS INDICATORS
When the following indicators light up or blink on the operation panel or the following alphanumeric
codes appear in the display, solve the problem immediately referring to both the table below
and the relevant page.
An original misfeed has occurred in the RSPF.
Remove the misfed originals referring to the
description of
Misfeed in the RSPF
.
Steadily
lit
Steadily
lit
Blinking
Blinking
Developer replacement
required indicator
Developer is required. Contact your SHARP
service center as soon as possible.
Replacement of toner cartridge will be needed
soon. Obtain a new cartridge.
A misfeed has occurred. Remove the misfed
paper referring to the description of
Misfeed
removal.
The lower side cover may be open. If so, close
it.
The paper tray is not installed properly.
Push the tray into the copier securely.
_
Toner cartridge must be replaced. Replace it with
a new one.
Toner cartridge
replacement
required indicator
Indication
See
page:
Cause and remedy
CH
is steadily lit in the
display.
The paper tray indicator is
blinking.
CH
is blinking in the display.
Misfeed indicator
Blinking
RSPF misfeed
indicator
The toner cartridge is not installed. Install the
toner cartridge. If
CH
is blinking even if the
cartridge is installed properly, contact your
SHARP service center immediately.
Side cover is open. Close the side cover
securely by pressing the round projections
near the side cover open button.
P
is blinking in the display.
Paper tray or bypass tray is empty. Load copy
paper.
A misfeed has occurred in the paper tray or
bypass tray. Remove the misfed paper.
The copier will not function. Turn the power
switch off, remove the power cord from the
outlet, and contact your SHARP service center.
A letter and a number appear
alternately.
32
_
23
27
30
23
10
_
_
27
_
Service by an authorized SHARP service
technician is required.
Steadily
lit
Maintenance
indicator
32
Be sure to use only genuine SHARP parts and supplies.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp AR156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AR156 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp AR156

Sharp AR156 User Manual - English, German, Dutch, Danish, French, Italian, Swedish, Spanish - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info