Manual Sharp AL-1452 (page 44 of 140) (English, German, Dutch, French, Italian, Spanish)

516034

Zoom out

Zoom in

1/140

DGB

1-30

Feeding roller cover

Abdeckung der Einzugsrolle

Roller rotating knob

Walzen-Drehknopf

E Misfeed in the SPF or in the R-SPF

An original misfeed may occur at one of

three locations: if the misfed original is

seen from the document feeder tray, (A)

in the document feeder tray; if the misfed

original is not seen from the document

feeder tray, (B) in the exit area or (C) under

the feeding roller. Remove the misfed

original following the instructions for each

location.

(A) Open the feeding roller cover and pull

the original gently to the left and out

from the document feeder tray. Close

the feeding roller cover. Open and

close the original cover to clear the SPF

or R-SPF misfeed (

) indicator. If the

misfed original cannot be easily re-

moved, proceed to (C) under the

feeding roller without pulling the orig-

inal forcibly from the document feeder

tray.

(B) Open the original cover and rotate the

roller rotating knob to remove the

misfed original from the exit area.

If the misfed original cannot be easily

removed, proceed to (C) under the

feeding roller without pulling the orig-

inal forcibly.

roller rotating knob to remove the

misfed original from the document

feeder tray or exit area. If it is difficult,

remove the misfed original from under

the feeding roller.

With the R-SPF, pull out the reversing

tray to remove the misfed original.

With the R-SPF, after removing the

misfed original form the exit area, be

sure to insert the reversing tray into the

exit area until it locks in place.

MISFEED REMOVAL FROM SPF OR R-SPF

BESEITIGUNG EINES PAPIERSTAUS IM SPF ODER R-SPF

A number may appear in the display

after a minus sign, indicating the num-

ber of the originals that must be

returned to the document feeder tray.

Clear the misfeed and return the requi-

red number of originals. Then press the

print (

) key to resume copying.

E Papierstau im SPF oder R-SPF

Ein Stau der Originale kann an drei Stellen

auftreten: Wenn das gestaute Original

vom Originaleinzugsfach aus gesehen

werden kann, (A) im Originaleinzugsfach;

wenn das gestaute Original vom Original-

einzugsfach aus nicht gesehen werden

kann, (B) im Ausgabebereich; oder (C)

unter der Einzugsrolle.

(A) Die Abdeckung der Einzugsrolle öff-

nen und das Original vorsichtig nach

links und aus dem Originaleinzugs-

fach herausziehen. Die Originalabdek-

kung öffnen und wieder schließen,

damit die Papierstauanzeige für den

SPF bzw. R-SPF (

) erlischt. Wenn

sich das gestaute Original schwer

entfernen läßt, bei „(C) unter der

Einzugsrolle“ fortfahren. Das Original

nicht gewaltsam aus dem Originalein-

zugsfach herausziehen.

(B) Die Originalabdeckung öffnen und den

Walzen-Drehknopf drehen, um das

gestaute Original aus dem Ausgabe-

bereich zu entfernen. Wenn sich das

gestaute Original schwer entfernen

läßt, bei „(C) unter der Einzugsrolle“

fortfahren. Das Original nicht gewalt-

sam herausziehen.

Walzen-Drehknopf drehen, um das

gestaute Original aus dem Original-

einzugsfach oder dem Ausgabebe-

reich zu entfernen. Falls dies Schwie-

rigkeiten bereitet, das Original unter

der Einzugsrolle hervorziehen.

In der Anzeige für die Kopienanzahl

erscheint eventuell ein Minuszeichen

(“–”) mit einer Zahl, die die Anzahl der

Originale angibt, die nach dem Pa-

pierstau wieder in den Einzeleinzug

gelegt werden müssen. Papierstau

beheben und angezeigte Anzahl der

Originale wieder zurücklegen. Dann Ko-

piertaste (

) drücken, um den Kopier-

vorgang fortzusetzen.

Beim R-SPF das Wendefach heraus-

ziehen, um das gestaute Original zu

entfernen.

Nach dem Entfernen des gestauten

Originals aus dem Ausgabebereich

des R-SPF darauf achten, daß das

Wendefach wieder in den Ausga-be-

bereich eingeschoben wird und einra-

stet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp AL-1452 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp AL-1452 Manual

Product: