Manual Sharp 50BG3E (page 5 of 36) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

745293

Zoom out

Zoom in

1/36

 Active Contrast - Automatically optimises the ‘backlight’ and

‘contrast’ of the picture according to the brightness of the screen.

 Backlight - Adjust the screen's brightness by increasing/

decreasing the panel's backlighting.

 Red - Adjust red tone of the picture

 Green - Adjust green tone of the picture

 Blue - Adjust blue tone of the picture

 CMS Hue - This is a standard to adjust the colour

either more reddish or more bluish in tone.

 CMS Value - A higher value makes the image brighter.

A lower value makes the image darker.

 CMS Saturation - Increases or decreases the

saturation of a selected colour.

SOUND

Sound Mode - Choose from the following presets

 Standard - Default settings

 Music - Emphasises music over voices

 Movie - Provides live and full sound for movies

 Sports - Emphasises sound for sports

 Personal - Selects your personal sound settings

DTS Studio Sound - Allows you to turn surround sound e ect ON or OFF.

DTS DRC - Adjusts the level of dynamic range for DTS movie

soundtracks. Very loud sounds get quieter and quiet parts

get louder. Recommended for midnight listening.

Speaker - additional settings for TV speakers or external speakers.

 Digital Output - Setttings for the digital audio

output. Choose from the following options:

 Auto - Selects the best settings automatically.

 PCM - Audio stream will be processed by the TV.

 RAW - Audio stream will be processed by device connected

via digital output (soundbar, AV receiver etc.).

 Digital Audio Delay - Enables the user to adjust

sound setting to sync picture and audio for external

speakers connected via digital audio output.

 Audio Delay (ms) - Enables the user to adjust sound

setting to sync picture and audio for TV speakers.

Auto Volume Level (AVL) - When ‘on’ is selected, the volume

will stay at aconstant level regardless of input/source.

Expert Settings

 Balance - To switch the sound between the left and right speakers.

 Equalizer - Adjusts the volume of di erent sound

frequencies. The equalizer sound levels can only be

adjusted when the sound mode ‘Personal’ is selected.

 Audio Description - Additional sound track for visually impaired.

Available only on selected DTV shows.

 AD Volume - to adjust volume of Audio Description sound track

CHANNEL

DVB Antenna - Set the type of DTV signal

 Air - Terrestrial (DVB-T)

 Cable - Cable (DVB-C)

Auto Scan - Allows you to retune the television for all digital

channels, digital radio stations and analogue channels.

Analogue Manual Tuning - Allows you to

manually tune your analogue signal.

Digital Manual Tuning - Allows you to manually tune your digital signal.

Auto update channel list - if you set this option ON, channel positions,

names and frequencies will be periodically updated by the provider.

This may cause issues if you ordered channels in the list of channels

by yourself. In such case we recommend to keep this option o .

HbbTV - Allows the user to switch HbbTV on/o . To

use HbbTV, TV must be connected to the internet and

watched channel must support HbbTV service.

LCN - Set LCN to ON if you want to arrange channels by provider

preferences (only applies to DVB-T and DVB-C channels).

CAM Setting - Pay per view services require a “smartcard” to be

inserted into the TV. If you subscribe to a pay per view service the

provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can

then be inserted into the COMMON INTERFACE PORT (CI Card In). This

menu allows you to view information and change settings of CAM.

Signal Information - Information about DVB signal.

Satellite Setup - This menu is only available in DVB-S2 mode. You can

select the type of satellite, your transponder and your LNB type, etc.

NETWORK

Network - Select the type of network connection

- Cable (Ethernet) or Wi-Fi (Wireless).

NOTE: For connecting to the Internet with a wired connection, connect a Cat

5/Ethernet cable (not included) from the TV to your broadband modem/router.

Ethernet - This advises the connection status of the wired

network. If [OK] is pressed, another menu opens which allows

for the connection to an IPv4 or IPv6 wired network:

 Auto - Will automatically connect the TV to

your home network (recommended)

 Manual - Allows you to manually change the IP,

Netmask, Gateway and DNS information.

 Disable - TV will not use selected IP version

for connecting to the network.

Wi-Fi - This advises the connection status of the Wi Fi network. If [OK] is

pressed, another menu opens which shows all Wi-Fi networks which the

set can pick up. Select the one which you want to connect to and press

[OK].

If the network is locked, the screen will now show a

password entry screen with an on-screen keyboard.

WPS - option for alternative secure connection to the Wi-Fi network.

 Push button method - select this option and

press WPS button on your router.

 Generate a security PIN - TV will generate security

PIN which needs to be entered into router.

NOTE: The connection process may take a few minutes, please be

patient. Every time the TV is then powered on it will automatically

connect to the network, this may also take some time.

Network Test - A network connection test

Network Information - Information about the network settings

TIME

Time - Shows the date and time. After pressing [OK] while

this item is highlighted, the following options appear:

 Auto Sync - Automatically sets the time and date on the TV

set. Requires the TV to be tuned in with a digital signal and/

or an internet connection. Turn “Auto Sync” o to manually

adjust the time and date settings. If “Auto Sync” is set to o

with the time and date manually adjusted, this information

will be reset when the power to the TV is disconnected.

 Time Zone - Change your current time zone.

 Daylight Saving - option to manually turn daylight saving on/o .

On Time - Allows you to set aspeci c time for your TV to turn on, the

channel it will then display, the source it will be on and also the volume.

This function can then be toggled to repeat every day or acertain day.

Oﬀ Time - Allows you to set aspeci c time for your TV to turn o .

Sleep Timer - Lets you set the sleep timer so the television automatically

switches o after aset amount of time. O -> 10min -> 20min ->

30min -> 60min -> 90min -> 120min -> 180min -> 240min.

Auto standby - Adjustment for the auto standby in

hourly increments: O -> 3h -> 4h -> 5h.

OSD Timer - Lets you adjust the amount of time the On

Screen Menu stays on the screen before disappearing.

SYSTEM

Language - Set your preferred languages.

 Menu Language - Allows you to change the language of the menu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 50BG3E in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp 50BG3E Manual

Product: