13247
7
Zoom out
Zoom in
Previous page
1/48
Next page
7
Quick Reference Control Operation
L Location of Controls
Front Panel
Basic Remote Control Functions
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
32N-S400, 36N-S400
A POWER
Press On.
Press again Off.
B VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
C SENSOR AREA FOR REMOTE CONTROL
D CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
Press both at same time to access MAIN MENU Screen.
E VIDEO/AUDIO TERMINALS
(VIDEO/AUDIO terminals are also provided on the rear.)
IN 2
NOTE:
A
C
B
D
E
POWER
CH
VOL +
POWER
CH
VOL +
A
B
C
D
E
27N-S300
POWER
CH
MENU
VOL +
POWER
CH
VOL +
MENU
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press once Switch to external video
INPUT 1 mode.
Press again Switch to external video
INPUT 2 mode.
Press again Switch back to the
original TV mode.
See page 34.
ENTER
Used in some instances where a VCR
or Cable Converter Box requires an
enter command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 36)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
See pages 26 - 29 for channel
presetting.
Moves the
mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
CLOSED CAPTION appears when
sound is muted.
PIP FUNCTION
With the VIDEO inputs, you can watch
two pictures at the same time. See
pages 32 - 33.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
VCR
MENU MUTE
CATV
PAUSE
PIP
TV
FLASHBACK
DISPLAY
INPUT
TV VCR CATV
STOP REC
REW PLAY FF
VCR CH
SWAP FREEZE MOVE SELECT
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the four categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See pages 30 - 31)
VOLUME UP/DOWN
(+) Increases sound.
() Decreases sound.
In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV.
In CATV position, sends power and
channel select commands to a cable
TV converter.
VCR CONTROL
See page 36.
0-9 27NS300/32/36NS400 1.1 5/31/00, 8:25 AM7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 36N-S400 Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 36N-S400 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 5,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info