Manual Sharp 36C530 Operation Manual (page 45 of 60) (English)

13243

Zoom out

Zoom in

1/60

Dimension: 140 X 215 mm

Operation of Universal Remote Control (Continued)

•

How to identify a cable converter

Direct Entry Method

Refer to the following steps and list to quickly

find the remote control code for your cable TV

converter.

• First look up your converter’s remote code

number before going through the Direct Entry

Method below.

• If this procedure does not identify your

converter, use the Search Method for

identification.

(1) Slide CATV /DVD-TV/VCR switch to CATV.

(2) Press and hold down DISPLAY

and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s, enter your converter’s two-digit

code number using REMOTE KEYPAD (refer

to the list).

• The remote control is now ready to send

commands to your converter.

• Some brands have more than one remote code

listed due to changes in the remote codes from

early to later model years. In such cases, you

may have to try more than one code to find

the code your converter accepts.

Note:

Depending on the model, year produced,

brand, and type of CATV converter, some

models may not be compatible with the remote

control.

Search Method

(1) Slide CATV /DVD-TV/VCR switch to CATV.

(2) Press the power button on the cable converter

to ON.

(3) Stand at least 6 feet away from the converter.

Point the Remote towards the converter.

Hold down the DISPLAY

and CH a at the

same time. KEEP HOLDING THE BUTTONS

DOWN.

(4) Watch the Channel Number indicator on the

converter.

Channel numbers will scan up when the

converter has been identified.

Release the DISPLAY

and CH a as soon as

the channel numbers start to scan up.

The converter’s remote control code number

has been identified, and the remote is ready

to operate the converter.

Tips on identifying your cable converter

Be Patient: A minute or two can seem a lot

longer when you’re waiting for something to

happen, but the code should be identified

within 2 minutes. Remember, it is only a one-

time set-up.

Be careful not to let the CATV converter scan

more than 5 channels when the indicator starts

to move up. If you continue holding down the

DISPLAY

and CH a after 5 channel scans,

the proper remote code can be passed up, and

the 2 minute identifying cycle will have to be

repeated.

If a channel change does not occur on the

cable converter within 2 minutes, read the

identifying instructions again and repeat the

steps. Should a channel change still not occur,

the remote will not operate with the desired

converter.

Note:

Some satellite receivers can be operated by

the REMOTE CONTROL. If you have a

Satellite Receiver, you can use the above

method to search for available channels.

Anvision

Cable Star

Eagle

General Instrument

Jerrold

Magnavox

Oak Sigma

Panasonic

Philips

Pioneer

Randtek

RCA

Scientific Atlanta

Sony

Viewstar

Zenith

07, 08

04, 05, 15, 23, 24, 25,

30, 36

04, 05, 15, 23, 24, 25

30, 36

07, 08, 19, 25, 28, 29,

32, 33, 40, 41

27, 39

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

18, 20

07, 08

27, 43

03, 22, 42

07, 08, 19, 26, 28, 29

32, 33, 40, 41

CATV CONVERTER

BRAND

REMOTE CONTROL

CODE NUMBER

32C530(41-45) 1/29/03, 2:26 PM45

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 36C530 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp 36C530 Operation Manual Manual

Product: