Manual Sharp 36C530 Operation Manual (page 41 of 60) (English)

13243

Zoom out

Zoom in

1/60

Dimension: 140 X 215 mm

1 2 3

4 5 6

7 8 9

100

POWER

DVD

VCR

MENU MUTE

PAUSE

FLASHBACK

DISPLAY

INPUT

TV • CATV • VCR • DVD

STOP REC

REW PLAY FF

CH/SKIP

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

CATV TV

DVD VCR

DVD/VCR POWER

Press to turn the VCR or DVD

on and off.

PLAY

Press to playback a tape or disc.

REWIND

Press to rewind a tape or

reverse a disc. For some VCRs

or DVDs you may need to press

STOP first, then REWIND.

PAUSE

Press to temporarily stop the

tape or disc during playback

or recording (VCR only).

Press again to release PAUSE.

STOP

Press to stop the tape or disc.

REMOTE KEYPAD

Use to enter two-digit code

numbers when identifying your

VCR, DVD and CATV converter.

ENTER

Press to rapidly advance the

tape or disc. For some VCRs or

DVDs, you may need to press

STOP first, then FF.

VCR CHANNEL

UP ( )/ DOWN ( )

Press to scan up or down through

channels on the VCR.

RECORD

Press to begin recording.

(VCR only)

DVD SKIP

Press to jump forward to the

beginning of the next chapter/track,

or backward to the beginning of the

current chapter/track, and

automatically start to play that

chapter/track.

Operation of Universal Remote Control

•

Universal Remote Control

With the purchase of your television set you

also have received the latest innovation in

remote control technology. With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

Note:

• Depending on the model year produced, brand

and type of VCR, cable TV converter and DVD,

some models may not be compatible with the

remote control.

• Some brands may not enable channel

selection until the ENTER is pressed. In such

case, try the following.

Example:

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

For detailed information on the use of the

Cable TV converter Box refer to their operating

manuals.

•

Using your Remote with your TV

After installing the batteries, set the CATV/

DVD-TV/VCR on the Remote to the TV

position. (If you can change the channel of the

TV by pressing CH a/s on the Remote

Control, it is in the TV position.)

•

“Identifying” VCRs, cable TV converters

and DVDs

Your Remote Control has been set at the

factory to operate your TV and many remote

controlled VCRs, cable TV converters and

DVDs. However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs.

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends proper

signals to operate your accessory.

• This identifying step will not have to be

repeated until power to the Remote is

interrupted due to a battery failure.

•

Using your remote control with a VCR

Once you make certain the Remote Control

has “identified” your remote controlled VCR or

DVD, the Remote is ready to operate your unit.

The various VCR or DVD function buttons on

the Remote will not operate your VCR or DVD

if those features are not already found on your

unit.

• All VCR buttons will operate whether the

Remote is in TV or VCR modes.

• For detailed information on the use of the VCR

or DVD, refer to the operation manual of the

VCR or DVD.

32C530(41-45) 1/29/03, 2:26 PM41

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 36C530 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp 36C530 Operation Manual Manual

Product: