13243
7
Zoom out
Zoom in
Previous page
1/60
Next page
7
Dimension: 140mm x 215mm
Quick Reference Control Operation
Part Names
Front Panel
Quick Reference Control Operation
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
CHANNEL UP/DOWN
(8) Selects next higher
channel.
(9) Selects next lower
channel.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
Press On.
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 32.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 41.
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to external video
INPUT 1 mode.
Press 2 times Switch to external video
INPUT 2 mode.
Press 3 times Switch to external video
INPUT 3 mode or COMPONENT mode.
Press 4 times Switch back to the
original TV mode.
See page 39.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 41)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
See pages 28 ~ 30 for channel
presetting.
• Moves the [ mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
CLOSED CAPTION appears when
sound is muted.
VIDEO/AUDIO
TERMINALS
INSIDE DOOR
IN 2
32C530(07) 2/18/03, 4:39 PM7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 36C530 Operation Manual at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 36C530 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info