Manual Sharp 32N-S400 Operation Manual (page 36 of 48) (English)

13227

Zoom out

Zoom in

1/48

Operation of Remote Control

L Universal Remote Control

With the purchase of your television set you

also have received the latest innovation in

remote control technology. With its easy-to-

use push-button keypad, your Remote can

control your television set and most infrared

remote-controlled VCRs and cable TV

converters as well.

• Depending on the model, year produced,

brand and type of VCR, some models may

not be compatible with the remote control.

• Some brands of VCR or Cable TV converter

Box may not enable channel selection until

the ENTER is pressed.

Example:

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

For detailed information on the use of the VCR

or Cable TV converter Box refer to their

operating manuals.

L Using Your Remote With Your TV

After installing the batteries, set the

TV-CATV

on the remote to the TV position. (If you can

change the channel of the TV by pressing

CH UP

(

) or

DOWN

(

) on the Remote

Control, it is in the TV position.)

L “Identifying” Remote VCR and Cable TV

Converters

Your Remote Control has been set at the

factory to operate your TV and many remote

control VCRs and Cable Converters. However,

in some cases an easy one-time set-up step

may be necessary before the Remote will

operate accessory VCRs and Cable

Converters.

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR or Cable Converter.

• Once “identified”, the Remote sends the proper

remote signals to operate your accessory.

• This identify step will not have to be repeated

until power to the Remote is interrupted due

to a battery failure.

L Using Your Remote Control With a VCR

Once you make certain the Remote Control

has “identified” your remote controlled VCR,

the Remote Control is ready to operate your

unit. The various VCR function buttons on the

Remote Control will not operate your VCR

if those features are not already found on

your unit.

• All VCR buttons will operate whether the

Remote Control is in TV or CATV modes.

• For detailed information on the use of the VCR,

refer to the operation manual of the VCR.

NOTE:

1 2 3

4 5 6

7 8 9

100

POWER

VCR

MENU MUTE

CATV

PAUSE

PIP

FLASHBACK

DISPLAY

INPUT

TV • VCR • CATV

STOP REC

REW PLAY FF

VCR CH

SWAP FREEZE MOVE SELECT

VOL

—

VOL

ENTER

A B C D

PERSONAL PREFERENCE

VCR POWER

Press to turn the VCR on

and off.

PLAY

Press to playback a tape.

REWIND

Press to rewind a tape.

For some VCRs you may

need to press STOP first,

then REWIND.

In Playback mode, hold

button down to view picture

moving rapidly in reverse.

PAUSE

Press to temporarily stop

the tape during playback

or recording. Press again

to release Pause.

STOP

Press to stop the tape.

REMOTE KEYPAD

Use to enter two-digit code

numbers when identifying your

VCR.

ENTER

Press to rapidly advance the

tape. For some VCRs, you may

need to press STOP first, then

FF.

In Playback mode, hold button

down to view the picture moving

rapidly in forward direction.

VCR CHANNEL

UP ( ) / DOWN ( )

Press to scan up or down through

channels on the VCR.

RECORD

Press to begin recording.

PIP BUTTONS

See pages 32 - 33.

32-48 27NS300/32/36NS400 1.1 5/31/00, 8:26 AM36

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 32N-S400 Operation Manual in the language / languages: English as an attachment in your email.

The manual is 5,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sharp 32N-S400 Operation Manual Manual

Product: