745308

Sharp 32BI2EA Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
EN
[Default Channel]
Allows you to choose default Digital TV channel, which will be displayed
after TV is powered on.
[HBBTV Settings]
Allows the user to switch HbbTV on/o . To use HbbTV, TV must be
connected to the internet and watched channel must support HbbTV
service.
[Subtitle]
Select your preferred subtitle language and type.
[Teletext]
Select language for teletext.
[OAD]
Allows you to set automatic software upgrade via OAD (On Air Download)
on/o .
[Auto Sleep]
Controls the amount of time the set will continue to operate without any
buttons being pressed on the set or remote control before going into
standby.
[System Information]
Allows you to view signal frequency, signal quality and signal strength of
current Digital TV channel.
[Version Info]
Information about TV software version.
Settings menu
Network & Internet
To get to the Settings menu, press the HOME button, then select [Settings].
Available options
[Wi-Fi]
Allows you to enable/disable built-in WiFi.
[See all]
Shows full list of available wireless networks.
[Add new network]
Allows you to add Wi-Fi network manually. This is needed in case you set
up on your router invisible/hidden wireless network.
[Scanning always available]
Some location apps need to periodically scan other Wi-Fi devices in the
area. This function allows to scan Wi-Fi devices even in case Wi-Fi is turned
o  .
[Wow]
Allows the set to turn on via network control wirelessly.
[Wol]
Allows the set to turn on via network control over LAN connection.
[Proxy Settings]
Con gure proxy server for web browser.
[IP settings]
Con gure wired network.
Channel
To get to the Settings menu, press the HOME button, then select [Settings].
Con gures the settings related to receiving broadcast programming.
Available options
[Channels] (Antenna mode)
[Channel Scan]
Allows you to retune the television for all digital and analogue channels.
[Update Scan]
Tunes all frequencies, on which there are currently not tuned any channels.
It is recommended when searching new channels which were added
recently, without retuning all channels.
[Analog Manual Scan]
Direct tuning of analogue stations.
[Single RF Scan]
Allows you to manually tune your digital signal by selecting the channel
number.
[Manual Service Update]
Channel positions, names and frequencies will be updated by the provider.
[LCN]
Logical Channel Number. When turned on, digital stations will be ordered
according to provider preferences.
[Channel Scan Type]
Settings for [Channel Scan]. You can select what type of channels should
be tuned: Only encrypted channels, only free channels, or all channels.
[Channel Store Type]
Settings for [Channel Scan]. You can select what type of channels should
be stored after tuning  nish: Only digital TV channels, only radio channels,
or all channels.
[Favorite Network Select]
In some countries/areas may be available more networks. Channels will be
ordered di erently according to selected network.
[Channel Skip]
Allows you to choose channels, which will be skipped when pressing CH+ /
CH- buttons on the remote.
[Channel Sort]
Allows you to swap position of two channels between each other.
[Channel Move]
Allows you to move selected channel to new position.
[Channel Edit]
Allows you to delete channels from the channel list.
[Analog Channel Fine-tune]
Allows you to  ne-tune analogue channels to adjust picture quality.
[Channels] (Cable mode)
[Channel Scan]
Allows you to retune the television for all digital and analogue channels.
[Single RF Scan]
Allows you to manually tune your digital signal by selecting the channel
number.
[LCN]
Logical Channel Number. When turned on, digital stations will be ordered
according to provider preferences.
[Channel Scan Type]
Settings for [Channel Scan]. You can select what type of channels should
be tuned: Only encrypted channels, only free channels, or all channels.
[Channel Store Type]
Settings for [Channel Scan]. You can select what type of channels should
be stored after tuning  nish: Only digital TV channels, only radio channels,
or all channels.
[Channel Skip]
Allows you to choose channels, which will be skipped when pressing CH+ /
CH- buttons on the remote.
[Channel Sort]
Allows you to swap position of two channels between each other.
[Channel Move]
Allows you to move selected channel to new position.
[Channel Edit]
Allows you to delete channels from the channel list.
[Analog Channel Fine-tune]
Allows you to  ne-tune analogue channels to adjust picture quality.
[Channels] (Satellite mode)
[Satellite Re-Scan]
Allows you to scan selected satellite.
[Satellite Add]
Allows you to add new Satellite into the list of satellites.
[Satellite Update]
Tunes all frequencies, on which there are currently not tuned any satellite
channels.
[Satellite Manual Tuning]
Allows you to scan selected satellite transponder.
[Channel Skip]
Allows you to choose channels, which will be skipped when pressing CH+ /
CH- buttons on the remote.
[Channel Sort]
Allows you to swap position of two channels between each other.
[Channel Move]
Allows you to move selected channel to new position.
[Channel Edit]
Allows you to delete channels from the channel list.
[Clear Channel List]
Allows you to delete all tuned channels.
[Channel Installation Mode]
Set the type of Digital TV signal you receive. This setting a ects content of
[Channels] menu.
[Auto Channel Update]
If this option is set to ON, channel positions, names and frequencies will be
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sharp-32bi2ea

Reset search

  • Hi!
    How do I quick-shift channels from Antenna to Satellite and back to Antenna? The way via Menu-Settings-Channel-Channel installation settings to choose either Antenna or Satellite is far too complicated. There must be a short cut which I couldn't find.
    Sincerely
    Sebastian Grafenauer Submitted on 20-6-2021 at 16:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 32BI2EA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 32BI2EA in the language / languages: English as an attachment in your email.

The manual is 1.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sharp 32BI2EA

Sharp 32BI2EA User Manual - German - 18 pages

Sharp 32BI2EA User Manual - Dutch - 16 pages

Sharp 32BI2EA User Manual - French - 16 pages

Sharp 32BI2EA Quick start guide - All languages - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info