145865
15
Zoom out
Zoom in
Previous page
1/29
Next page
- 14 -
INSTALL. (Installation) Menu
You can store a channel manually, or modify the current set-
tings of a channel (for example, fine-tuning a channel).
You can also change the colour system.
 Press M button to display the main menu.
Press
or button to select INSTALL.item. Then
or   button to display the INSTALL. menu.
Note:
 If you want to modify the current settings of a channel, se-
lect the channel of which you want to modify the setting.
Then display the main menu on screen.
 In AV mode, you can change only the COLOUR SYSTEM
item.
1. PROGRAMME is the first selected item as you enter the
INSTALL. menu. Press the 
or  button to select the
programme number where you want the tuned channel to
be stored. (You may also type the programme number us-
ing the digit buttons)
Note:
Do not use the PROGRAMME item when you want to
modify the current programme number setting as this may
cause other programmes to be changed that are in the ex-
isting programme number.
2. Press 
 or   button to select Tuning Mode. By press-
ing
or  button , you can select the mode in which
you want the search to be made, "Channel Search"
mode or "Frequency Search" mode.
 When you select "Channel Search" ("Channel" will be
displayed in the menu.), the display of the
INSTALL.(Installation) Menu will be as below :
3. Press   or   button to select BAND. Using  or 
button to select the band in which you want to search a
channel.
4. Press 
 or  button to select SEARCH. Press  or
button to start searching. (Press  button to search
forward. Press 
to search backwards.)
 If the found channel is not the desired one, press 
or
button to start searching again.
 To stop searching before a channel is found, press the
reverse direction button. For example, when the TV is
searching forward with
button, press button to
stop searching.
 If you know the channel number which you want to find,
you can find the channel directly. Follow the step 5 to
select the correct standard, then press
or to
select CHANNEL again, and press
or button to
select the channel number, or enter the number with the
digit buttons.
5. If the picture is not clear or no colour appears, change the
colour system to display the picture normally. Press
or 
 button to select COLOUR SYSTEM, then press 
or 
button to choose the correct one.
 In TV mode: PAL / SECAM
In AV mode: AUTO / PAL / SECAM / NTSC 3.58 /
NTSC 4.43
6. If the channel reception is poor, fine-tune the channel.
Press 
 or   to select FINE TUNING, then press 
or 
button to fine-tune the channel.
7. After the all settings are completed, store the new
channels setting to the programme number which you se-
lected. Press
or to select STORE, then press
 or   button to store it.
8. When you select "Frequency Search" , the display of the
Tuning menu will be as below :
As "Frequency Search" is selected, TV will search ac-
cording to the channel frequencies.
With the
or  button, select Search. Search can be
made either forward, pressing
button or backwards,
pressing
button.
The search will be done with steps of 0.25MHz. in each
step.
If the tuned station is not the desired one, you can continue
searching pressing
or button again.
When the desired station is tuned, select STORE using
or button and store it to the programme number
you selected pressing 
 or   button or press OK but-
ton.
 Now as you had selected the Frequency Search, the tuning
mode of the program is stored as Frequency Search Mode.
Direct Frequency Access
 If you know the broadcast band and the channel frequency
of the station you want to tune, you do not need to make
search; select Frequency, using
or button in the
Frequency Mode Tuning Menu. You can type the first 3 dig-
its of the frequency using the digit buttons, and then you
can select the decimal part of the frequency by using 
 or
 buttons with 250kHz steps. For example if you want to
tune the station at frequency 224.25 MHz; first you can di-
rectly type 224. The bar at bottom of the menu will show
224.00 . Then by increasing or decreasing with 0.25 MHz
steps using
or buttons, you can select the
224.25MHz .When you type and select the frequency, the
corresponding station will be displayed.
ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65 21.01.2004, 08:2814
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 28lf-92e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 28lf-92e in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info