145865
9
Zoom out
Zoom in
Previous page
1/29
Next page
- 8 -
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.
Use this apparatus in tropical and moderate climates.
Features
 Remote Control Colour Television
 100 UHF / VHF / Cable channel presets
 Cable Channel Compatible
 Menu Driven functions
 2 Euro connector Sockets
 Front AV sockets
 Front SVHS connector.
 NICAM Stereo
 Full function teletext (Fastext)
 Headphone socket
 Direct Channel access
APS (Automatic Programming system) Tuning
 Program custom name feature
Automatic search tuning
 Sleep Timer
 Child lock
 Blue mute on no video signals
Audio mute on no video signals
Auto switch of after 5 mins of no signal
 WSS (wide screen signal decoding)
 NTSC playback
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220 -240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Aerial Connections
 Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect external equipment
See Connecting external equipment on page 18.
 See the instruction manuals provided with the external de-
vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied
dry batteries in the remote control.
1. With your thumb nail, pull up the slit as indicated by the
arrow to remove the battery cover.
2. Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment.
3. Replace the battery cover.
Notes:
 Remove batteries if weak or if the unit is not in use for long
periods.
 Do not mix old and new batteries.
Incorrect installation of the batteries may damage the re-
mote control.
Switching the TV ON/OFF
You can operate your TV either using the remote control
handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the RED
LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
or,
Press Power Button and P/CH+or -P/CH buttons on the
TV or on the remote control respectively, so the TV will
switch on and the RED Led will turn GREEN.
To switch the TV off
 Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
 Press the power button located on the front of the TV.
ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65 21.01.2004, 08:288
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 28lf-92e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 28lf-92e in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info