149104

Sharp 28 hw53h Manual

19
Zoom out
Zoom in
Previous page
1/42
Next page
18
Equalizer & Stereo menus
1. Press the MENU button ● to see the MAIN Menu.
2. Press the GREEN button to see the AUDIO EFFECTS
Menu.
AUDIO EFFECTS Menu
3. Press the YELLOW button to see the EQUALIZER Menu.
EQUALIZER Menu
4. Press the YELLOW button to select a pre-defined
equalization: Personal / Classic / Jazz / Pop / In concert / Sport .
5. To change the Personal option:
a) Press the Cursor LEFT/RIGHT buttons
C / I to select:
100Hz, 330Hz, 1KHz, 3.3KHz or 10KHz
The red point mark indicates the selected item.
b) Press the Cursor UP/DOWN buttons
E/ F to
Adjust.
Note: The Equalizer adjustments are not operative for the
headphones.
6. Press the BLUE button to see the STEREO Menu.
STEREO Menu
7. Press the Cursor UP/DOWN buttons
E/ F to select:
Speakers matrix, Headphones matrix, AV Matrix [ᕡ] or
Identification.
The red point mark indicates the selected item.
8. Press the Cursor LEFT/RIGHT buttons
C / I to change.
Select Speakers matrix to change the sound mode in the
speakers.
Select Headphones matrix to change the sound mode in the
headphones.
Select AV matrix to change the sound mode in the audio output
of the external connector (AV-1/AV-2).
Select Identification to activate (ON) or deactivate (OFF) the
automatic Identification of audio system of the current program
[ᕢ] .
9. Press the MENU button ● to close the STEREO Menu.
ᕡ About Matrix: Depending on the sound transmission the sound reproduction can be chosen in the STEREO Menu.
In this menu you can select a sound mode to the speakers, another to the headphones and another to the external connectors (AV-1/AV-2).
When the TV set is receiving a STEREO NICAM programme, the TV selects STEREO automatically, and you can change:
STEREO ǟǞ MONO
When the TV is receiving a BILINGUAL NICAM programme, the TV selects DUAL CHANNEL A automatically, and you can change:
DUAL CHANNEL A ǟǞDUAL CHANNEL B ǟǞ DUAL CHANNEL A B ǟǞ MONO
When the TV set is receiving a MONO NICAM programme, the TV set selects MONO NICAM automatically, and you can change:
MONO NICAM ǟǞ MONO
When the TV is receiving a MONO FM programme, the TV set selects MONO automatically but the sound mode cannot be change.
ᕢ About Identification
IDENTIFICATION ON: The TV automatically identifies the sintonized audio system MONO FM, STEREO NICAM or DUAL NICAM SIGNAL.
IDENTIFICATION OFF: Disqualifies the automatic identification of the audio system and forces the sound into MONO FM.
This mode can be convenient when the level of the signal received is extremely weak.This function is independent for every program.
MAIN Menu
AUDIO EFFECTS Menu
EQUALIZER Menu
STEREO Menu
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sharp 28 hw53h at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sharp 28 hw53h in the language / languages: English as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info