668642
8
Zoom out
Zoom in
Previous page
1/20
Next page
4
TOLL FREE: 1-800-798-7398
Using Your Sonic Duo+
Wood & Hard Floor Cleaner - cont.
IMPORTANT: Make sure the floors are swept
or vacuumed before using the Sonic Duo+
.
Visit www.sharkclean.com for other great
quick cleaning products to complement your
Sonic Duo+
, such as the Shark
®
Rotator
vacuums.
4 Twist the quick release cord holder to unwrap
the power cord completely. (Fig. 8)
Plug into an electrical outlet and slide the “On/
Off” button down to turn the Sonic Duo+
on. (Fig. 9)
5 Make sure that the Hard Floor Cleaning Pad is
attached to the Sonic Duo+
. This pad has
a “Green” trim and the tag says “Hard Floor
Cleaning Pad”. Attach the side of the Cleaning
Pad with the tag to the back of the Sonic
Duo+
. (Fig. 10)
NOTE: The first time that you use the Sonic
Duo+
there may be air in the system causing
a delay for the solution to come out of the spray
nozzle. Hold the spray button down for 5 to 10
seconds until you see the solution come out.
fig. 8
fig. 7
IMPORTANT: When cleaning, do not use the
Sonic Duo+
without attaching a Hard Floor
Cleaning Pad and adding the diluted cleaning
solution to the Reusable Bottle first. When
polishing, do not use the Sonic Duo+
without
attaching a Hard Floor Polishing Pad.
Cleaning Your Hard Floors:
1 To remove the Reusable Bottle, hold it and pull it
up to remove from the unit. (Fig. 5)
2 Remove the “Green” bottle cap. Add 1 part of
the Sonic Activated Wood & Hard Floor Cleaner
solution to 7 parts water into the Reusable Bottle.
Use the measuring marks on the Reusable Bottle
for easy measuring and filling. (Fig. 6) Always
fill with cold water first up to the “Water Fill
Line” and then the add the cleaning solution
up to the “Solution Fill Line” to avoid
foaming and to ensure accuracy.
3 Screw the bottle cap on tightly and insert the
Reusable Bottle into the unit upside down. Push
it down to make sure that it is well inserted. You
will hear an audible “Click” when the Reusable
Bottle is inserted properly. (Fig. 7)
IMPORTANT: Do not use on unsealed wood
or unglazed ceramic floors. Do not use on wood
or tile floors that are highly worn, unfinished or
have a wax or oil finish. Surfaces that have been
treated with wax or some no wax floors may be
damaged by the cleaning and polishing solutions
therefore it is always recommended to test an
isolated area of the surface to be cleaned before
proceeding. You should always check the use and
care instructions from the floor manufacturer.
fig. 5 fig. 6
fig. 9
fig. 10
ZZ500_26_IB_E_130221_3.indd 4 13-02-21 3:30 PM
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark ZZ500 SONIC DUO plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark ZZ500 SONIC DUO plus in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info