576377
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
www.sharkclean.eu
1 Always make sure that the unit
is turned off. (Fig. 2)
2 Insert the charger plug into the
back of the unit then plug it into a
wall outlet. The 4 blue LED lights
will light up sequentially from 1
(Low) to 4 (high) while charging.
When all 4 lights turn solid blue,
the unit is fully charged and
ready for use. If the lights do not
illuminate when the unit’s plugged
in, press the power button
once. The lights should start the
illuminating sequence, signifying
the unit is charging. (Fig. 3)
Fig. 4
CHARGING YOUR SHARK
®
CORDLESS SWEEPER
NOTE: When the power switch is
on the sweeper will not charge.
3 Charge the battery for 3.5 hours
before initial use and 3.5 hours
for each recharge. Our Cordless
Sweeper is powered by Li-Ion
batteries that need this time to build
up their charge. All 4 will turn blue
when the unit is fully changed.
4 For best battery performance,
remove the charging adapter
from the unit after the charging
period has completed. Storing
the unit with the adapter
attached and plugged in will
reduce the battery life.
5 The LED lights indicate battery
capacity. As the unit loses
battery strength, the LED
lights will begin to turn off in a
descending order, from 4 (High)
to 1 (Low). When all four lights
begin flashing, the motor on the
unit will stop working. Please
recharge the batteries according
to step 2.
IMPORTANT: Although
many adapters look similar,
its important to use only the
adapter that came with the unit
CHV3900BS.
Fig. 2 Fig. 3
If the brush roll stops
moving, it’s probably due
to the anti-jam feature.
This feature protects the
motor from becoming
USING YOUR SHARK
®
CORDLESS SWEEPER
OFF
overheated. If the brush
becomes overloaded, it will
stop turning and both speed
indicator and the first LED
light will flash. Turn off your
unit by pressing the power
button once. See page 12
for further instructions
on removing or cleaning
the brush roll. Wait for 10
seconds to let your unit cool
down. Now press the power
button again and you’re
ready to resume cleaning!
1 Press the power button to start
the unit. When finished cleaning,
press the power button again to
turn the unit off. (Fig. 4)
2 Do not use the unit to pick up
liquids or clean wet floors.
3 Do not use the unit on concrete,
tar or other rough surfaces.
4 Do not use the unit to pick
up pieces of string or fabrics.
Do not use the unit to clean
tasselled or frayed carpets.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark V3800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark V3800 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info