Manual Shark S3101WN (page 4 of 15) (English, French, Spanish)

668648

Zoom out

Zoom in

1/15

Pump

actuator

Fig. 1

How To Assemble Your Steam Mop

1. Remove all the parts from the

packaging.

2. Insert the upper extension

tube into the lower

telescopic tube. (Fig. 1)

Push it in until you

hear it click into place.

3. Insert the extension

tube assembly into the

pump actuator. Make

sure that the locking

tab snaps into place.

(Fig. 1)

4. Place the micro-fiber

cleaning pad underneath

the mop head. Make

sure that the hook

and latch strips are

facing up. (Fig. 2)

Press to secure.

TIP: The micro-fiber

cleaning pads have

a colored tab so that

a different pad can

be assigned to

different tasks or

rooms in the

house.

Fig. 3

Fig. 2

Mop

head

Hook & latch

strips

OPERATING INSTRUCTIONS

Using the Steam Mop

IMPORTANT: Never use the steam mop

without the micro-fiber cleaning pad

attached to the mop head or without water

in the water tank.

Please note that when using for the first

time, the appliance may take longer than

the normal 30 second startup time to

steam. You may need to pump the handle

a few times before the steam is released.

This is due to the water making its way

from the water tank through the pump and

into the heater. This will only occur during

the first use.

1. Sweep or vacuum floors before using

the steam mop.

2. Twist the quick release cord holder to

unwrap the power cord completely.

3. Plug into a 120-volt electrical outlet.

4. The power “On” light will turn green.

5. It takes approximately 30 seconds for

the unit to heat up and the steam to be

ready.

6. Pump the handle a few times to

dampen the micro-fiber cleaning pad.

Begin mopping with a forward and

backward motion, this pumping action

will release steam as you mop.

Fig. 4

MAX

Filling the Water Tank

IMPORTANT: Always insure that the

unit is “UNPLUGGED” from the wall

receptacle prior to filling and before

attaching the micro-fiber cleaning pad to

the bottom of the mop head. Never use

the steam mop without the micro-fiber

cleaning pad attached to the mop head.

NOTE: When using your new steam mop

for the first time you may notice water

residue inside of the unit. Water drops

can also be found in the packaging. This

is normal and you should not be alarmed.

Each steam mop is 100% tested in the

factory to ensure product performance

and safety. Sometimes

water is left in the unit

from these test procedures.

1. Turn the cap

counter clockwise

and then lift up to

remove from the

water tank. (Fig. 4)

2. Using the filling flask and funnel, pour

one flask of water into the water tank.

Do not overfill the unit past the “MAX”

fill line on the water tank. (Fig. 4)

3. Replace the cap onto the water tank.

To Extend the Telescopic Tube

1. Lift the locking latch up 90°.

(Fig. 3)

2. Holding the handle, extend the

telescopic tube to the desired

length. (Fig. 3)

3. When you have the telescopic

tube to the length that you

want, close the locking latch.

HELPFUL HINT: If you find

the Steam Mop difficult to

push/pull during use, then

simply increase the height

of the pole.

OPERATING INSTRUCTIONS

7. When the water tank is empty, the

steam mop will stop emitting steam.

Unplug the power cord from the

electrical outlet and refill the water tank

following the instructions above.

8. When you have finished using the

steam mop, unplug the unit from the

electrical outlet and carefully remove

the micro-fiber cleaning pad from the

mop head. Please note that the micro-

fiber cleaning pad gets very hot with

the steam. Always use caution when

removing.

9. Never leave the micro-fiber cleaning

pad on the steam mop head when

you have finished using the steam

mop. Always remove the micro-fiber

cleaning pad and wash in warm water

with a mild detergent. Never use

bleach or fabric softener when

washing the reusable micro-fiber

cleaning pad. The micro-fiber cleaning

pad may be washed in a washing

machine and dried in a clothes drier on

low heat. We recommend that you air

dry.

IMPORTANT: Be careful when machine

washing or drying with mixed fabrics as

micro-fiber pads will pick up lint from other

fabrics and the hook and latch strips will

stick to other garments. We recommend

washing the micro-fiber cleaning pads

separately or placing them in a garment

bag first.

CAUTION: Never store the steam mop

with a wet or damp micro-fiber

cleaning pad still attached as this will

damage your floors.

Care & Maintenance of the Micro-

Fiber Cleaning Pad

Due to the unique cleaning ability of this

pad, proper care of your micro-fiber

cleaning pad is required to ensure long

life and continued cleaning ability.

• The first thing you should do when you

get a new micro-fiber cleaning pad is

to wash and dry it. During the

manufacturing process the fabric has

a tendency to become flat as it picks

up contaminants from the air and

machinery. There will also be a number

of loose threads that, while they cause

no harm, can be annoying the first time

you use the pad.

• To wash the micro-fiber cleaning pad,

simply put it in your washing machine

using the warm water setting or hand

wash.

• We recommend washing your micro-

fiber cleaning pads separately from

other fabrics or placing them in a

garment bag first if washing by

machine. They have a tendency to

pick up lint and other particles from

other fabrics and the next time you

use your micro-fiber cleaning pad, this

lint will transfer to the surface being

cleaned.

• ONLY USE LIQUID DETERGENTS,

never use dry detergents as many

times the granules do not fully

dissolve and become trapped in the

cleaning pad. This can scratch the

surface that you are cleaning.

• NEVER USE BLEACH OR FABRIC

SOFTENERS! Bleach will damage the

micro-fiber fabric and fabric softeners

deposit a coating on the micro-fiber

fabric what will not allow the pad to

clean efficiently.

• We recommend that you air dry the

micro-fiber cleaning pad. If using a

clothes dryer, do not put on a high

heat setting as high heat will cause

the micro-fiber pad to shrink and the

micro-fibers to break down.

• Wash the micro-fiber cleaning pads

regularly and don’t allow them get too

dirty so that they will last much longer.

As with any fabric, dirt particles,

grease and other contaminants can

cause the fibers to break down,

therefore regular cleaning will help

preserve your micro-fiber cleaning

pads.

• As you use the micro-fiber cleaning

pad, you will notice that sometimes a

thread will loosen or pull out. This is

normal and you should NEVER PULL

AT THE LOOSE THREAD! Pulling the

thread can cause the weave to come

undone. Instead, simply trim the

thread with a pair of sharp scissors.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Shark S3101WN in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Shark S3101WN Manual

Product: