743722
10
Zoom out
Zoom in
Previous page
1/13
Next page
sharkclean.comsharkclean.com
REPLACING THE BATTERY
To remove the battery, turn the unit over and
unscrew the battery cover with a Phillips-head
screwdriver.
Unplug the old battery from its connector, then
plug in the new battery. Replace battery cover and
screw it back into place. See Battery Removal and
Disposal on back cover.
REPLACEMENT PARTS
MAINTENANCE
Filter
RVFFK950
Brushroll
1152FK950
Side Brushes
RVSBK950
Dust Bin
1151FK850
Brushroll Access Door
1154FK950
Battery
RVBAT850
NOTE: This appliance contains batteries that are only replaceable by skilled persons.
NOTE: To order replacement parts and filters, visit sharkaccessories.com.
TROUBLESHOOTING
MAINTENANCE
If any error lights are illuminated or flashing on your Shark ION™ Robot, see the error code
chart below:
ERROR CODE SOLUTION
ALL LED LIGHTS are o
Power may be turned o or battery may need charging. Turn power
switch to On position. If no response, place robot on dock to charge.
CLEAN (RED) + ! flashing together
Suction motor failure. Remove blockages and clean filters. Remove dust
bin and make sure nothing is blocking suction.
CLEAN (RED) flashing
Robot may be stuck on an obstacle. Move robot to a new location on a
level surface.
MAX flashing
Robot may be stuck on an obstacle. Move robot to a new location on a
level surface.
Front bumper may be jammed. Check bumper.
DOCK flashing
Your robot’s BotBoundary™ sensors are reporting an error. Please
contact Customer Service at 1-800-798-7398.
CLEAN (RED) + DOCK flashing together
Cli sensors are reporting an error.
Wipe cli sensors with a clean cloth.
Robot cannot start due to an error. Turn o the power switch on the side
of the robot, wait five seconds, then turn power back on. Ensure your
robot is on a level surface with no obstructions.
CLEAN (RED) + MAX flashing together The dust bin has been removed and needs to be reinserted.
MAX + ! flashing together A side brush is stuck. Remove debris from side brushes.
CLEAN (RED) + MAX + ! flashing together A wheel is stuck. Remove debris from wheel.
DOCK + MAX + ! flashing together Blockage in brushroll. Remove obstruction.
DOCK + ! ashing together Make sure you are using the dock that came with your robot.
CLEAN (BLUE) + MAX + ! flashing together
The robot is caught in a tight space or on an obstacle.
There is something stuck in the robot’s front bumper.
Clean any obstructions or debris from the bumper. Gently push the
bumper up and down and back and forth, making sure it moves smoothly.
CLEAN + DOCK + MAX + ! flashing together
The robot’s wheels might be stuck, or something might be caught in them.
Check the wheels for obstructions and remove anything that might be
stuck or wrapped around the wheels.
Press down on the wheels, then let them spring back into place.
Rotate wheels back and forth.
CLEAN + DOCK + MAX flashing together Robot is in Find My Robot mode. You can deactivate this mode in the app.
For all other issues, please call Customer Service at 1-800-798-7398.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark ION RV850 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark ION RV850 Series in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info