743742

Shark ION Robot RV860WVC Series Manual

14
Zoom out
Zoom in
Previous page
1/33
Next page
sharkclean.com sharkclean.com
TROUBLESHOOTING TROUBLESHOOTING
MAINTENANCE: ROBOT MAINTENANCE: HANDHELD
If any error lights are illuminated or flashing on your Shark ION
TM
Robot, see the error code
chart below:
ERROR CODE SOLUTION
ALL LED LIGHTS are o
Power may be turned o or battery may need charging. Turn
power switch to On position. If no response, plug in unit to
charge battery.
CLEAN (RED) + ! flashing together
Suction motor failure. Remove blockages and clean filters.
Remove dust bin and make sure nothing is blocking suction.
CLEAN LIGHT flashing red
Robot may be stuck on an obstacle. Move robot to a new location
on a level surface.
Front bumper may be jammed. Check bumper.
If light continues to flash, remove the front caster wheel and clean
the wheel housing.
MAX LIGHT flashing
Robot may be stuck on an obstacle. Move robot to a new location
on a level surface.
Front bumper may be jammed. Check bumper.
If light continues to flash, remove the front caster wheel and clean
the wheel housing.
DOCK LIGHT flashing
Your robot’s BotBoundary™ sensors are reporting an error.
Please contact Customer Service at 1-800-798-7398.
CLEAN (RED) + DOCK
flashing together
Cli sensors are reporting an error.
Wipe cli sensors with a clean cloth.
Robot cannot start due to an error. Ensure your robot is on a
level surface with no obstructions.
CLEAN (RED) + MAX
flashing together
The dust bin has been removed and needs to be reinserted.
MAX AND ! LIGHTS
flashing together
A side brush is stuck. Remove debris from side brushes.
CLEAN (RED) + MAX + !
flashing together
A wheel is stuck. Remove debris from wheel.
DOCK, MAX, AND ! LIGHTS
flashing together
Blockage in brushroll. Remove obstruction.
LIGHT INDICATOR WHAT IT MEANS
LIGHT BLINKING BLUE Low battery.
LIGHT BLINKS BLUE TWICE,
THEN PAUSES
Blockage. Turn o power and remove blockage, then turn power
back on.
SOLID BLUE LIGHT Power is on.
BLUE LIGHT FADES IN AND OUT
STEADILY
Unit is charging.
DIM BLUE LIGHT Unit is fully charged.
NO LIGHT
Power is o, or unit needs recharge.
For all other issues, please call Customer Service at 1-800-798-7398.
The Shark ION™ Handheld will not operate.
• The battery needs to be recharged.
• Try using a dierent electrical outlet to charge.
• The battery is damaged and needs to be replaced.
The Shark ION Handheld will not pick up debris or suction is weak.
• The dust cup is full. Empty the dust cup.
• The filter needs cleaning or replacement. Clean or replace the filter.
• The battery needs to be recharged.
• The filter screen is clogged and needs cleaning. Open dust cup and clean filter screen.
Dust is escaping from the Shark ION Handheld.
• The filter is not installed correctly. Remove filter, then reinstall.
• The dust cup filter has a hole or a puncture and needs to be replaced.
• The dust cup is not installed correctly. Remove dust cup, then reinstall.
Attached accessory does not work.
• The accessory is blocked. Carefully remove all lint, hair,
or other debris.
• The accessory won't fit into the Shark ION Handheld. Carefully remove all lint, hair or other debris
from the nozzle of the vacuum.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark ION Robot RV860WVC Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark ION Robot RV860WVC Series in the language / languages: English, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info