743710
12
Zoom out
Zoom in
Previous page
1/16
Next page
22
ENGLISH
sharkclean.com21 1-800-798-7398
Your Shark ION ROBOT™ is designed with Smart Sensor technology so it can
clean all areas of your floors and navigate its way out of tight spaces. During your
first few cleanings, you may need to make some small adjustments to optimize
your robot’s performance.
RETURNING TO DOCK
Make sure the dock is set up as shown.
If your robot roams too far, it could have
trouble finding the dock. It may be helpful to
block o part of your home with the included
BotBoundary strips, or to add a second dock
(available at sharkaccessories.com)
DOORWAY THRESHOLDS
Your robot can easily climb over most common
thresholds. However in some situations they
may present a challenge. Use the included
BotBoundary strips to block o these areas.
LOW-CLEARANCE FURNITURE
Your robot may find its way under furniture
with low clearance, but not be able to free itself.
Use furniture risers to increase clearance, or
create a no-go zone with the included
BotBoundary strips.
CORDS AND OBSTRUCTIONS
Always prep your home before cleaning.
Some furniture or loose cords may create
problems for your robot. Clear away cords
and obstructions or block o the area with
the included BotBoundary™ strips.
Tip: You can use the included connectors to create angles with your
included BotBoundary strips.
Before Prep Robot Friendly
5 ft.
3 ft.
3 ft.
Use the BotBoundary strips to quickly and easily create “no-go zones” to keep
your robot out of the areas you would like it to avoid. These may include:
• Near power cords that might cause tangles
• Hallways where you’d rather your robot not travel
• Around furniture with low clearance that may trap your robot
BotBoundary strips
BotBoundary strips
USAGE INSTRUCTIONS
1. Cut the BotBoundary strip to the desired length, 18” Minimum,
so it covers the entire perimeter of an object or spans the length
of the doorway you’d rather your robot not cross.
2. Simply lay the BotBoundary strip flat on the floor or under an
area rug. For best results, make sure your BotBoundary strip is
completely flat against the floor.
3. With the provided connectors, you can create angles to
customize the BotBoundary strips to fit your home.
When setting up your BotBoundary strips it is useful to either make a
closed loop around an object using the included connectors or to place
them between fixed objects, like door frames or legs of a couch.
(18” Minimum)
Boundary strip lays flat
PREPPING YOUR HOME USING BOTBOUNDARY
STRIPS
TIPS AND TRICKS FOR GREAT PERFORMANCE
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Shark ION Robot RV755 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Shark ION Robot RV755 in the language / languages: English as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info